Hi.
> I've ordered 2 of these cards (ZC 2.4), and tested
> the demos with my reader (GCR410 from Gemplus). 1
> card is already out of service, and doesn't answer to
> a reset... I only loaded the Calc demo app, tested
> it, it worked.
I killed one ZC 2.3 by a wrong way of crc calculation.
But th
Hi.
> I've ordered 2 of these cards (ZC 2.4), and tested
> the demos with my reader (GCR410 from Gemplus). 1
> card is already out of service, and doesn't answer to
> a reset... I only loaded the Calc demo app, tested
> it, it worked.
I killed one ZC 2.3 by a wrong way of crc calculation.
But th
On Sat, 27 Nov 1999, Michael Renzmann wrote:
> > > It should work with a processor smartcard such as
> > > Cryptoflex.
> > Do you or anyone else know where (in Germany) I can
> > get a Cryptoflex or any other card which can be used
> > with the Towitoko driver?
>
> Try out the BasicCard. An powe
Hi Hatto.
> > It should work with a processor smartcard such as
> > Cryptoflex.
> Do you or anyone else know where (in Germany) I can
> get a Cryptoflex or any other card which can be used
> with the Towitoko driver?
Try out the BasicCard. An powerful processor card that
can be used with Muscle
On Wed, Nov 24, 1999 at 09:42:24AM -0800, Carlos Prados wrote:
> Probably SCardConnect primitive is triying to reset
> the card in the reader. If you are using a
> non-processor card (I think "Towitoko PIN Security
> Card" is a memmory card) this operation will fail as
> far as it's not supported
Probably SCardConnect primitive is triying to reset
the card in the reader. If you are using a
non-processor card (I think "Towitoko PIN Security
Card" is a memmory card) this operation will fail as
far as it's not supported by the low-level driver for
this kind of cards.
It should work with a pr
Hi,
Yes you are right. PC/SC looks for a valid ISO-7816-3/4 card inserted
into the reader. You are trying to use an unsupported memory card at the
moment. I can give you suggestions as to which cards to use if you want
to send me a personal email.
Best Regards,
Dave
*
Sorry if this is a stupid question...
I just succeeded to compile pscs-lite-0.3.0 and to run its test with a
Towitoko card driver (on Pentium PC with Suse 6.2).
Test resulted in "Power Up Failed". Can someone tell me what it means
and what I can do about it? I hope it hasn't been a mistake to us
