We have the same problem (no screen activity), try with take away the
motherboard battery for a few minutes and then put it back again.
Guillermo Narvaez
Servidores Escuela
Implementación OLPC | Programa Joaquin Victor Gonzalez
La Rioja - Argentina
On Thu, Nov 11, 2010 at 9:01 PM, James Came
On Fri, Nov 12, 2010 at 09:42:23AM +1000, Dudley Daduwe wrote:
> I tried recconnecting the IDE HDD a number of times but that didn't
> help.
Have you tried without the IDE HDD connected? Have you tried the IDE
HDD in another machine? The reason I ask is that a BIOS may fail to
start executing on
There were no beeps. If there were beeps then it would have given me some
clue on Memory or VGA but there was none. I tried recconnecting the IDE HDD
a number of times but that didn't help. Besides that the server is running
on an e-Box3 -D82.Version 1.3 RoHS. Finally there are no lights indecating
On Fri, Nov 12, 2010 at 08:33:17AM +1000, Dudley Daduwe wrote:
> The problem faced here is that, when you power the XS server you can
> see that the server has been powered and the power light is ON,
> however, there is NO DISPLAY ON THE SCREEN.
This requires hardware support, and isn't really a p
Dudley,
Do you hear any beeps when you power on the system?
Can yWhat procedures have you attempted to diagnose the problem?
ou describe the hardware you are using in a bit more detail?
Robert
- Original message -
> Hi all,
>
> The problem faced here is that, when you power the XS server
Hi all,
The problem faced here is that, when you power the XS server you can see
that the server has been powered and the power light is ON, however, there
is NO DISPLAY ON THE SCREEN.
Thank you,
Dudley
On Thu, Nov 11, 2010 at 6:04 PM, Anna wrote:
>
>
> On Thu, Nov 11, 2010 at 12:38 AM, Dudl
On Thu, Nov 11, 2010 at 12:38 AM, Dudley Daduwe
wrote:
> Thank you for the updates on the motherboard. Please advise me as to how I
> could troobleshoot my E-Box server.
> Previously I was able to connect the IDE and boot up.However, I decided to
> remove the original IDE HDD and put and new IDE
Thank you for the updates on the motherboard. Please advise me as to how I
could troobleshoot my E-Box server.
Previously I was able to connect the IDE and boot up.However, I decided to
remove the original IDE HDD and put and new IDE HDD onto the server. After
doing that I was not able to see any
