Do the head bolts / studs go into water jackets? My memory is letting me down
but last time I had a head off I chased the threads with a tap and the tap
bottomed out in there.
Hence the reason its not a good idea to use too much oil when you lube the
bolts during installation--they can hydrolo
arc Medina
> www.marcmedina.com <= updated 8/30/05
>
>
>
>
> - Original Message -
> From: "Sean B." <[EMAIL PROTECTED]>
> To: "SDML" <[EMAIL PROTECTED]>
> Sent: Thursday, September 01, 2005 7:31 AM
> Subject: SD> Arp
should be able to
help:
http://www.mrmetric.com/
Thanks,
Marc Medina
www.marcmedina.com <= updated 8/30/05
- Original Message -
From: "Sean B." <[EMAIL PROTECTED]>
To: "SDML" <[EMAIL PROTECTED]>
Sent: Thursday, September 01, 2005 7:31 AM
S
Just wondering, how do we torque these? The same as the factory specs? Also
need to know what size of tap I need to clean out the threads in the block. As
far as I know, I will need to clean out the threads, use oil on the studs, and
put them in hand tight, then torque them. Does this sound proper?