AIL PROTECTED]>
To: Ian . . . . <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Wednesday, November 24, 2004 11:30 PM
Subject: RE: SD> Turbo to Manifold Nuts
Actually I think they are 18mm. But I don't know the thread off hand,
it's a semi standa
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: SD> Turbo to Manifold Nuts
Any idea what size the power steering pressure line to steering rack nut
is?
It's a 19 mm but it's cross threaded and I need to tap it, but don't
know what size tap to get...
Ian
`89 Lancer She
ter
From: "Jeff Chojnacki" <[EMAIL PROTECTED]>
Reply-To: "Jeff Chojnacki" <[EMAIL PROTECTED]>
To: "Sdml (E-mail)" <[EMAIL PROTECTED]>
Subject: Re: SD> Turbo to Manifold Nuts
Date: Tue, 23 Nov 2004 17:28:37 -0600
10mm x 1.5. Factory nuts take a 15mm
m: "Dean Stillie" <[EMAIL PROTECTED]>
To: "Saxon, Howard (PTC - Auburn Hills)" <[EMAIL PROTECTED]>; "Sdml
(E-mail)" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, November 23, 2004 4:48 PM
Subject: Re: SD> Turbo to Manifold Nuts
> They
gt;
To: "Sdml (E-mail)" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, November 23, 2004 2:07 PM
Subject: Re: SD> Turbo to Manifold Nuts
> They are probably M8 x 1.25. You will want to use as high of a grade of
nut
> as possible. Also, if you can get a "
They are probably M8 x 1.25. You will want to use as high of a grade of nut
as possible. Also, if you can get a "tall" nut, such as a machine set-up
nut, that would be the best bet. Also, while you're at it, don't forget to
use some high temp, anti-seize compound.
Howard Saxon
Senior Design
What size/pitch are the nuts that hold the turbo to the exhaust manifold?
I'm helping a friend that just bought a turbo 2 converted Omni. Can you
believe there were no nuts holding the turbo to the exhaust manifold?
Kevin Isenberg
1985 Dodge Ram D-100
1985 Dodge Shelby Charger Turbo II/A-520
1987