Hello everyone. I was in tyhe junkyard and found two tbi motored cars. 1987 and
1992 both with auto trans. The question is, can i use these long blocks for
turbo applications? does all the stuff (other than intake etc) bolt up ok? Like
the crankshaft to clutch etc etc. thanks a bunch
Yes as they are essentially the same blocks and cranks. The pistons are
different as are the rods. For longevity you'll want to change the rods and
pistons unless you run very little boost. The blocks do not have the water
outlet or oil drain back holes in the back of the block for
In a message dated 1/30/2007 11:56:48 A.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Hello everyone. I was in tyhe junkyard and found two tbi motored cars. 1987
and 1992 both with auto trans. The question is, can i use these long blocks
for turbo applications? does all the stuff
In a message dated 1/30/2007 12:43:07 P.M. Pacific Standard Time,
[EMAIL PROTECTED] writes:
Those ports can be added by a machine shop as the bosses are there already.
The oil and water ports on the front of the block are easier to add as one
goes in the side of the thermostat housing and
