Hi All
Well its time to change the front bearings on my Shelby Lancer, anyone out
in Shelby land know any tricks or tips. I picked up new bearing and hub
combo kits. Autozone will lend me a bearing puller with a slide hammer is this
the way to go?
Roy
Albuquerque, NM
1986 GLHS #200
1987
Shop press, can't imagine a slide hammer working with our hubs
Bruce Bender
610.570.4711
www.LuzaderMachine.com
- Reply message -
From: rapid...@aol.com
Date: Fri, Jul 1, 2011 1:25 pm
Subject: SD> wheel bearings Shelby Lancer
To:
Hi All
Well its time to change the front bea
You can pull them that way, but you will need a press to put them back in
without ruining them. I usually just buy the hub with new bearings in it so
I don't have to mess with it since the hub will come off the knuckle.
On Fri, Jul 1, 2011 at 12:25 PM, wrote:
> Hi All
> Well its time to change
ri, 01 Jul 2011 17:25:54 -0000 (UTC)
Subject: SD> wheel bearings Shelby Lancer
Hi All
Well its time to change the front bearings on my Shelby Lancer, anyone out
in Shelby land know any tricks or tips. I picked up new bearing and hub
combo kits. Autozone will lend me a bearing puller with
1 12:48 PM
To: rapid...@aol.com
Cc: shelbydodge@imagilist.com
Subject: Re: SD> wheel bearings Shelby Lancer
If these are anything like that Daytonas hub assembly, (and I believe it is)
they are a 15-20 minute job. Basically the 32mm drive axle nut and 4 -15mm
bolts behind the spindle that ho
nment is needed after
the job is done..
-Original Message-
From: shelbydodge-bounces+jcc=planetb@imagilist.com
[mailto:shelbydodge-bounces+jcc=planetb@imagilist.com] On Behalf Of
rapid...@aol.com
Sent: Friday, July 01, 2011 1:26 PM
To: shelbydodge@imagilist.com
Subject: SD> whe
Well I got one side done. I had to get a bearing in/un-stall kit from
Harbor Freight that made the job easy, right on the car.
_http://www.harborfreight.com/fwd-front-wheel-bearing-adapters-66829.html_
(http://www.harborfreight.com/fwd-front-wheel-bearing-adapters-66829.html)
plus I had a 20%