Hi John,
Here's a few suggestions, they are free so they are worth at least what you
paid for them.
Use some kind of quick connects, like Club Connex or Wishons so you can
interchange variables like flex and loft and the others.
If your not already, have your foundry mark the heads with act
Hi Bernie and all,
There is a trade off between speed and mass,
the lighter head increases speed, but reduces mass.
In working with arguably the Jack Nicklaus of long drive Gerry James, we
worked with heads from about 179 grams to about 207 grams and got the best
Ball Speed with a head at 193 g
I've not run a demo day but my observation, sad to say, is to keep a
close eye on your inventory.
/Ed
On Tue, 03 May 2011 21:35 -0400, j...@clubmaker-online.com wrote:
> I'm working out a deal with a local course/driving range here in
> sunny Traverse City (sunny Cedar, actually) to hold a few d
George,
I heard the UL-45 is the same shaft as the 45s from Integra with a different
paint job. Maybe a slight modification with the 175 gram driver head (I have
the Integra 175 and used DTG version on a customer’s club.). I like the
shafts...they hit the ball very straight, though a bit high f
Hi Bernie,
Have you tried any of the 45 gram shafts from Integra? They are not very
expensive & I have had very good luck with them, except 2 out of 4 of their
stiffs I get are still a little soft, more high R then S.
George Huson
ByGeorge Custom Clubs
--- On Mon, 5/2/11, Bernie Baymiller wro
At 09:35 PM 5/3/2011, j...@clubmaker-online.com wrote:
I plan on forcing jr. to do most of the grunt work (he's 12 now, he
owes me). I'll be under an umbrella looking important.
Already!?! Time flies when you're having fun.
DaveT
--
Shoptalk ** Sponsored by the new Aldila Voodoo.
Learn more a
I'm working out a deal with a local course/driving range here in
sunny Traverse City (sunny Cedar, actually) to hold a few demo days
to showcase lightweight clubs.
Any words of wisdom on running a demo day from those that have done
so? Was it worth your while?
I plan on forcing jr. to do mos
Hi; I don't have an NF. I have one of Kaufmann's freq meter. Funny you should
mention it. The guy said he hit the SW, AW and PW just fine, but couldn't "get
the 5 iron off the ground." Even stranger, remember with Pelz said to put
really soft flex shaft in the short clubs? Pelz, he's the guy wh
Hi Prof Tutelman. I assumed I'd get a response from you and I appreciate it. As
always, reasoned and reasonable.
I spent some time today with a couple clubmakers. We discussed this anomaly, if
I can call it that. What occurred to me is pretty much what you mentioned re:
clamp length. Clamping
I don't have the answer, but perhaps some suggestions. The two things
that occur to me are:
(1) Profile: everybody has been talking about this, more in
terms of bend points or frequency measurements at certain
frequencies. But basically it is the profile.
(2) Torque: more tha
TFlan...one of the measurements some of the AGCP guys make is a 15-25-35
measurement from tip to butt with a 454g tip weight using a strain gauge freq
meter a process which Keith Chatham modified from a Bill Totten
presentation
at GS [ some years ago]. When measuring a variety of shafts, an
Yeah, I tend to agree. The shafts don't want to flex much from about the center
of the shaft, 14 - 16" down. And there's very little bend in the center. These
shafts are about as stiff as any graphites I've worked with. But as I said, the
freqs are low. Measuring from a 5" clamp doesn't tell th
Sounds like they might have a very stiff tip section compared to the other
filament wound shafts.
Rich "Mac" McHattie
Mac's Golf
-Original Message-
From: Tom Flanagan
To: shoptalk
Sent: Tue, May 3, 2011 5:52 am
Subject: RE: ShopTalk: This is a mystery to me . . .
Huh?
TFl
Huh?
TFlan
Date: Tue, 3 May 2011 04:10:25 -0700
From: d...@mcluckie.net
Subject: Re: ShopTalk: This is a mystery to me . . .
To: ShopTalk@mail.msen.com
Bend points??
-Don M
Bend points??
-Don M
--- On Mon, 5/2/11, Bernie Baymiller wrote:
From: Bernie Baymiller
Subject: Re: ShopTalk: This is a mystery to me . . .
To: ShopTalk@mail.msen.com
Date: Monday, May 2, 2011, 8:08 PM
Tom,
Hey, I had the same reaction to a couple of SKFiber’s new SuperFly 50-gram
s
15 matches
Mail list logo