Have you tried Billy Bob's golf? I think they have some adapters for the
Callaways.
Tom
- Original Message -
From: "Dan Neubecker" <[EMAIL PROTECTED]>
To:
Sent: Thursday, October 13, 2005 10:33 AM
Subject: ShopTalk: Great Big Bertha II reshaft
I have my firs
I have my first of these to do soon. They appear to have a special
hosel/ferrule. Anybody have some experience with these they can pass
on, in terms of what I need to have on hand to do this job properly? I
will probably drill out the current shaft and leave about 1/4" to 1/2"
of the original sh
Scott Bershing wrote:
Jeremy,
One thing I've done in a pinch is use two o-rings. I used a small one
that would fit inside the grove, then a slightly larger one that would
fit over the top and cover the hosel nicely. It was a rush job (guy
dropped it off and needed it back the next day), an
Jeremy,
One thing I've done in a pinch is use two o-rings. I used a small one that
would fit inside the grove, then a slightly larger one that would fit over
the top and cover the hosel nicely. It was a rush job (guy dropped it off
and needed it back the next day), and I just took the head &
Thanks Tflan for this reply
tflan wrote: Nope; .335". One small problem is that the bottom of the
borethrough is a little smaller diameter than .335". That's so the slit
tip shaft can be captured without shimming. The plug in the shaft tip is
a piece of plastic. The ferrule is a "lipped" O r
To: [EMAIL PROTECTED]
Subject: Re: ShopTalk: Great Big Bertha II
>Don
>
>The best place I found for these type of ferrules is BillBob golf
>in Cal. They have all the callaway ferrules for .350 or .335
>adapters. The GBB 2 is a .350 tip although I prefer using .335
>shafts
Don
The best place I found for these type of ferrules is BillBob golf
in Cal. They have all the callaway ferrules for .350 or .335
adapters. The GBB 2 is a .350 tip although I prefer using .335
shafts. They also have Taylor Made ferrules for both .350 or .335
adapter as well as the Ping hos
Don
The best place I found for these type of ferrules is BillBob golf in Cal. They have all the callaway ferrules for .350 or .335 adapters. The GBB 2 is a .350 tip although I prefer using .335 shafts. They also have Taylor Made ferrules for both .350 or .335 adapter as well as the Ping hosel r
This may have
been discussed before but can not find it. The New Callaway GBB_II does the ERC
Ferule fit and is the shaft .350. I have the ERC Ferules but can’t tell with
out taking the head off if the ferules are the same.
Thanks
Don Johnson
Please send me a picture. I have one coming in about a week from someone who is now in Florida.
His brother called me last night.
Ed
RK
when and if you get time to make a picture thru your scanner please send it
to me
TIA and say Hello to Lady Marion for me.
Harold Still
uipment
manufacturer's of world class golfclub repair equipment
---Original Message---
From: [EMAIL PROTECTED]
Date: Sunday, September 21, 2003 9:50:33 PM
To: [EMAIL PROTECTED]
Subject: ShopTalk: Great Big Bertha
HAS ANYONE REMOVED THE SHAFT FROM A GREAT BIG BERTHA PRO SERIES CLU
In a message dated 9/21/03 9:57:13 PM Eastern Daylight Time, [EMAIL PROTECTED] writes:
HEY ARNIE, IS THERE ANY REASON YOU HAD TO EXPLAIN THE PROCEDURE TO ME 5 TIMES? :-)
Pat McGoldrick--On Target Golf
THANK YOU TO ALL
I got a "system not responding message" when I hit send mail. Then the res
HEY ARNIE, IS THERE ANY REASON YOU HAD TO EXPLAIN
THE PROCEDURE TO ME 5 TIMES? :-)
Pat McGoldrick--On Target Golf
THANK YOU TO ALL
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, September 21, 2003 9:47
PM
Subject: ShopTalk: Great
HAS ANYONE REMOVED THE SHAFT FROM A GREAT BIG BERTHA PRO SERIES CLUB? Yes, I have done these. CAN THE SHAFT BE SAVED? Yes, you can save the shaft AND the "insert ferrule". IF SO, WAS SOMETHING USED BETWEEN THE PULLER AND THE CLUBHEAD TO SAVE THE FINISH ON TOP OF THE HEAD?Yes, use the same "PVC slee
HAS ANYONE REMOVED THE SHAFT FROM A GREAT BIG BERTHA PRO SERIES CLUB? Yes, I have done these. CAN THE SHAFT BE SAVED? Yes, you can save the shaft AND the "insert ferrule". IF SO, WAS SOMETHING USED BETWEEN THE PULLER AND THE CLUBHEAD TO SAVE THE FINISH ON TOP OF THE HEAD?Yes, use the same "PVC slee
Pat
I have done plenty of them and they are relatively easy once you have the proper set up. You need a tool that can be purchased from the PCS or Maltby to go between the head and puller. I made mine out if PVC fittings. The ferrules can be purchased from Golfsmith or Maltby but I prefer to
HAS ANYONE REMOVED THE SHAFT FROM A GREAT BIG
BERTHA PRO SERIES CLUB? CAN THE SHAFT BE SAVED? IF SO, WAS SOMETHING USED
BETWEEN THE PULLER AND THE CLUBHEAD TO SAVE THE FINISH ON TOP OF THE
HEAD? WHAT FERRULE WAS USED TO COMPLETE THE JOB? TIA
Pat McGoldrick--On Target
Golf
BEGIN:VCARD
VER
l in one.
The
second time I tried it, the same thing happened.
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]Sent: January 9, 2003 3:38
PMTo: [EMAIL PROTECTED]Subject: Re: ShopTalk: Great
Big Bertha reshaft questionWhy
bother drilling out the shaft?Secu
Why bother drilling out the shaft?
Secure head in vise, heat back of hosel with tourch, INSERT SCREW EXTRACTOR #4 INTO CENTER OF SHAFT AND PULL THE MUTHA OUT IN ONE PIECE! Reshaft as borethrough. Ferrule available from most any supplier.
Don't have a set of screw extractors? Get a set for about $8
On Wed, Jan 08, 2003 at 05:28:41PM -0800, tflan wrote:
> Reshafting GBB's, 975D's, 975J's, et al, is (are?) a piece of cake. Many of
> the guys here have done hundreds of them. For sure I've done a few hundred.
> If you can't grab the shaft in a head pusher, as it appears is your problem,
> then dr
In a message dated 1/8/03 8:28:46 PM Eastern Standard Time, [EMAIL PROTECTED] writes:
> I haven't reshafted a GBB before, the one I've got here has its graphite
> shaft snapped off about 1/4" above the hosel/insert.
>
> My question: Is it possible in this case to simply drill out the
> graphite s
D]>
Sent: Wednesday, January 08, 2003 12:43 PM
Subject: ShopTalk: Great Big Bertha reshaft question
> I posted this on the GEA but haven't gotten any answers, so I thought
> I'd ask you guys.
>
> http://forums.prospero.com/golfequip/messages?msg=113665.1
>
> He
I posted this on the GEA but haven't gotten any answers, so I thought
I'd ask you guys.
http://forums.prospero.com/golfequip/messages?msg=113665.1
Here's a copy of my question:
I haven't reshafted a GBB before, the one I've got here has its graphite
shaft snapped off about 1/4" above the hosel/i
24 matches
Mail list logo
