Hi
Thank you for your response Carlos...
I follow your instruction, but I can't get any result...
I change the port 46010 in your instruction to 6346 and 17107, both tcp
and udp, I make changes on rules file at /etc/shorewall.
However nothing happen...
But, I do thia change on rules:
ACCEPT
Hi
I think with this rules you are allowing traffic from loc to net from port
1024
Fabio R Correa.
2008/10/14 Gilberto Nunes [EMAIL PROTECTED]
Hi
Thank you for your response Carlos...
I follow your instruction, but I can't get any result...
I change the port 46010 in your
Hi
May be...
But I put this:
ACCEPT loc:172.18.0.100net
tcp 1024:
ACCEPT loc:172.18.0.100net
udp 1024:
And work properly for me...
Em Ter, 2008-10-14 às 14:16 -0300, Fabio Correa escreveu:
Hi
I think with this rules you are
Gilberto Nunes wrote:
Hi
May be...
But I put this:
ACCEPT loc:172.18.0.100net
tcp 1024:
ACCEPT loc:172.18.0.100net
udp 1024:
And work properly for me...
With any setup based on the
Gilberto Nunes wrote:
Hi
May be...
But I put this:
ACCEPT loc:172.18.0.100net
tcp 1024:
ACCEPT loc:172.18.0.100net
udp 1024:
And work properly for me...
Think you have a default policy of DROP or REJECT for traffic from
loc
Hi again
After I send the last mail. I alter the rules file again, to this:
ACCEPT loc:172.18.0.100net
tcp 1024:
ACCEPT loc:172.18.0.100net
udp 1024:
And I get connect to one IP of lan...
That is what I need
Thanks again...
Em
Hi all...
I have configure a Shorewall gateway to my little lan im my home.
The shorewall work fine here...
However, when I try to use Limewire, I can download nothing
On fact, I can't get any high connection on Limewire..
What can I do to make Limewire work properly behind a Shorewall
Hello
Gilberto, i have not used limewire, but i think you have to know the
ports it uses for making your clients accept connections from others. After
that, in your rules file you have to add a DNAT entry to redirect the
traffic to machine where limewire is running. Something like that:
DNAT