I need some support please that my choice of a Silver Gen 6 colloidal silver maker was a good one. I have taken Trem's suggestion of asking the list.
The first unit I received had to be sent back due to a problem they have had with a part that does not show up until the SG 6 is used. This caused me a whole weekend of distress about "what did I do wrong to wreck this expensive device"? However, Trem reassured me that it was a defective part and I breathed a sigh of relief. I received my replacement and finally got to make a couple of quarts of silver. The first quart set at medium strength measures 3 ppm on my Hanna TDS which Trem says should be doubled or more for the real count. The second quart on the highest setting measures 6 which doubled is 12 or more. On the website it says the Silver Gen will make up to 20 ppm. I have ordered one of the testers which Trem says is accurate yesterday from him so I will know the actual strength. I purchased a Silver Gen 6 as a person told me that I could make a gallon of 20 ppm over night and it would shut off automatically. This was confirmed by Trem before I purchased. I have to watch and turn off the inexpensive CS maker I already had which makes clear 20 ppm (10 on my TDS) CS easily in my gallon pickle jars without having to do anything with the electrodes which are the Canadian silver coins. An electronics repair friend of mine made it for me and it wouldn't pass the safety test so is on the dangerous side and requires strict awareness:>) I haven't a clue about the electrical specifications as it just plugs into the wall receptacle. Trem tells me I am going to have to adjust space between the electrodes and the depth of the electrodes in the water to obtain a higher ppm in the SG6. This was not something I thought I would have to do when I purchased a professionally made unit and don't have to do with my cheap unit. Would someone share their experience and satisfaction with the Silver Gen 6 and hopefully bolster my sagging spirits around this device? Has anyone else had a problem making the higher ppms with the Silver Gen 6? Do you have to move the electrodes and how do you have them to make the higher ppm? Thank you in advance for your support Kallie Miller -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver List archive: http://escribe.com/health/thesilverlist/index.html Address Off-Topic messages to: silver-off-topic-l...@eskimo.com OT Archive: http://escribe.com/health/silverofftopiclist/index.html List maintainer: Mike Devour <mdev...@eskimo.com>
