errata : drq3b
Le 09/08/2019 à 12:12, gérard Calliet a écrit :
Hello,
I'm giving an initiation about drivers on VAX VMS 5.5. Because of the
context, the training should be fine with a device RQ3B. I'm searching
for its source. Any one could give me information to get them?
Thank
Hello,
I'm giving an initiation about drivers on VAX VMS 5.5. Because of the
context, the training should be fine with a device RQ3B. I'm searching
for its source. Any one could give me information to get them?
Thanks,
Gérard Calliet
__
i) and VAX emulated
console. In this organization the (telnet) Vax console does'nt see any
ctrl e or ctrl p, which are seen in the simh initiator context. So the
problem persists.
But don't worry about that, there are other ways to do what I need.
Gérard Calliet
Le 06/08/2019 à 21:
Hello,
With a hardware VAX, we can get back to the console from the OPA
terminal using a CTRL P key. Usefull to do some deposit, for example to
initiate xDELTA.
Is it something like that possible with simh? I tried it and no result.
Do I miss something?
Gérard Calliet
Hello,
I have used for a long time the simh emulation of microvax 3900. I need
now to install and run DEC Windows on it.
Do you think it is possible? And is there a better simh VAX model for that?
Thanks,
Gérard Calliet
___
Simh mailing list
Simh
Hi Mark,
Le 11/04/2019 à 18:02, Mark Pizzolato a écrit :
On Thursday, April 11, 2019 at 8:48 AM, gérard Calliet wrote:
Le 11/04/2019 à 17:21, Mark Pizzolato a écrit :
Everything Dave said is true, AND part of the issue may be a need to
configure some details about the new NIC you've
for WinPcap and WinPcap Pro. Information can be found
at https://nmap.org/npcap/.
-Original Message-
From: Simh [mailto:simh-boun...@trailing-edge.com] On Behalf Of gérard
Calliet
Sent: Thursday, April 11, 2019 5:15 AM
To: simh@trailing-edge.com
Subject: EXT :Re: [Simh] winpcap problem
Hel
sage-
From: Simh [mailto:simh-boun...@trailing-edge.com] On Behalf Of gérard Calliet
Sent: Thursday, April 11, 2019 5:15 AM
To: simh@trailing-edge.com
Subject: EXT :Re: [Simh] winpcap problem
Hello,
I used the recommended tool windump -D and it doesn't see the new NICs.
So it is a pure problem
Hello,
I used the recommended tool windump -D and it doesn't see the new NICs.
So it is a pure problem of compatibility between Winpcap and the new NICs.
Did anyone see a similar problem? Are there somewhere WinPcap gurus?
Gérard Calliet
Le 11/04/2019 à 09:42, gérard Calliet a
Hello,
I tried a reboot of the host. Same problem. Is it possible there are
NICs not compatible with WinPcap? or some bizarre configuration to do on
the NIC?
Gérard Calliet
Le 05/04/2019 à 02:19, Mark Pizzolato a écrit :
On Tuesday, April 2, 2019 at 1:42 PM, gérard Calliet wrote:
I have
2 OpenVMS
server replacing 2 alpha and 1 Vax", but it seems there would be a lot
of work to get good performances, and in the mean time x86 have evolved
faster.
Gérard Calliet
Le 05/04/2019 à 02:19, Mark Pizzolato a écrit :
On Tuesday, April 2, 2019 at 1:42 PM, gérard Calliet wrote:
I ha
en by
the same command.
Any help?
Thanks,
Gérard Calliet
___
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
cific optimizations for CPU
intensive applications. They are doing almost only there long Ada
compilations.
I'll go back with new results.
Gérard Calliet
Le 06/03/2019 à 23:02, Mark Pizzolato a écrit :
On Wednesday, March 6, 2019 at 11:02 AM, gérard Calliet wrote:
VAX hardware 89 VUPS
SIMH 27 VU
VAX hardware 89 VUPS
SIMH 27 VUPS
Gérard Calliet
Le 06/03/2019 à 19:46, Hittner, David T [US] (MS) a écrit :
So from a performance analysis perspective, what are the VUPS ratings of the
VS4000-90 and the SIMH VAX running on the RX2800?
That's (more or less) the Integer performance r
Hi,
We had a VAX Station 4000-90 128M Memory.
We have a RX28000 9520 8G Memory.
Gérard Calliet
Le 06/03/2019 à 10:57, Pontus Pihlgren a écrit :
Hi
I'm having trouble understanding your question. Are
you comparing CPU-time of a real VAX(which model?) to
emulated CPU-time on an It
The reason was "you can do everything with 2 OpenVMS/Itanium boxes"
(they are Itanium I4)
Gérard Calliet
Le 06/03/2019 à 16:54, Zane Healy a écrit :
I have to wonder if a lightweight Linux disto, that has been locked down,
running on a Core i7 might not give better SIMH performance
8810571d
sim>
>>>>>>>>>>>>>>
Thanks,
Gérard Calliet
___
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
Hello,
I'm analyzing a problem on a drq3b (for vax). I'm looking for any
documentation or specification of this device. (As : MicroVAX/DRQ3B
Device Driver User's Guide or
DRQ3B DMA Parallel I/O Module Users Guide)
Any suggestion how I can get some?
Gérard Calliet
---
L
Thanks to all the answers. The issue was resolved changing on VMware the
NIC type adapters from VMXNET3 to E1000.
It was the recommanded by EmuVM NIC type . I recommand, too :)
Thanks
Gérard Calliet
Le 21/02/2018 à 15:08, Timothe Litt a écrit :
I can't think of anything that would
Hello Jean-Claude,
The MAC address of the emulated VAX machine has the value AA-00-04-...
which will be the result of the calculated DECNET address, and it is the
same address for the VMware NIC used.
Cordialement
Gérard Calliet
Le 21/02/2018 à 12:03, Jean-Claude Parel a écrit :
Hello
Le 21/02/2018 à 11:04, Dave L a écrit :
Do you have the relevant NICs set in promiscuous mode?
yes
On Wed, 21 Feb 2018 09:58:16 -, gérard Calliet
wrote:
Hello,
It's not specifically a simh question, but I hope someone had
experience about the issue.
I have a VAX VMS on a
n the VMware server, but they don't arrive at the NIC
at the host instance of the alpha emulation.
I think something is filtered out inside the VMware server between its
instances. I don't know more.
Thanks,
Gérard Calliet
---
L'absence de virus dans ce courrier électronique a
No alignment faults seen.
Thanks,
Gérard Calliet
Le 24/04/2017 à 16:33, Wilm Boerhout a écrit :
Does The compiler generate simh code that causes alignment faults when
simh executies? A notorious source of bad performance on early Itanium
ports.
/Wilm
Op ma 24 apr. 2017 om 14:22 schreef
lot of
page fault on the VAX.)
I don't understand why it is so bad. I thought about some special things
on C compilation, but which?
Any suggestions?
Thanks,
Gérard Calliet
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Av
You are wright, and, I'm ashamed, it was said on the github simh site
Thanks,
Gérard Calliet
Le 21/04/2017 à 11:52, Lennert Van Alboom a écrit :
Did you adjust the PHYSICALPAGES parameter accordingly, or have AUTOGEN do it
for you? I don't know what the parameter is set at by de
I do the wrong thing?
Thanks,
Gérard Calliet
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
___
Simh mailing list
Simh@trailing-edge.com
http://mailman.tra
Apologies to simh. I discovered a wrong value for CTLPAGES parameter.
Thanks,
Gérard Calliet
Le 19/01/2017 à 21:32, Mark Pizzolato a écrit :
On Thursday, January 19, 2017 at 12:25 PM, gérard Calliet wrote:
I use simh to emulate a VAX. It seems I have a strange issue.
I have a process which
Thanks. Of course I have already done all that things. And thinking
about simh itself is the last hypothesis I had. But when things are very
strange, you do strange hypothesis.
Regards,
Gérard Calliet
Le 19/01/2017 à 21:32, Mark Pizzolato a écrit :
Upgrading VMS from V6 to V7.3 would
Hello,
I use simh to emulate a VAX. It seems I have a strange issue.
I have a process which use a huge number of logical names. So it uses
memory. With a physical VAX of 128m it was difficult but possible.
I use the same system disk (upgraded from VMS 6 to VMS 7.3).
I use last version of simh w
test
without reinstalling the system.
>
> Pat
>
> On Thu, Sep 15, 2016 at 11:50 AM, gérard Calliet
mailto:gerard.call...@pia-sofer.fr>> wrote:
>>
>> Hello,
>>
>> simh on OpenVMS again.
>>
>> 1) with the help of an Lan expert of VSI, I
h (and the simh
configuration is the same on windows and on OpenVMS).
Any help will be welcomed: ideas, tools for tracking,...
Best regards,
Gérard Calliet
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www
use it says, before doing
anything:
Fatal terminal initialization error
Console input I/O error
Is there some switch I can use?
(I run simh on OpenVMS)
Thanks
Gérard Calliet
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://ww
r to have a look
to the code. I'm not at all an expert, so, if someone wants to help, he
would be very welcomed.
(We have had a previous issue with pcapvms, resolved by a VSI expert.
It's a new problem).
Gérard Calliet
---
L'absence de virus dans ce courrier électronique a été
ed for pure VAX is only a few part of the global
project.
Thanks,
Gérard Calliet
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
___
Simh mailing list
Simh@t
parameters? My .ini is minimal :
load -r ka655x.bin
attach NVR ka655.nvr
set cpu 512m
set -L rq0 rauser=1800
attach rq0 datauser2.dsk
set xq mac=08-00-2B-3C-96-78
attach xq eth1
b cpu
Any help will be welcomed, advice, documentation...
Thanks,
Gérard Calliet
---
L'absence de virus
.
Gérard Calliet
Le 28/03/2016 15:44, Hittner, David T (IS) a écrit :
PCAP-VMS is kind of strange software.
OpenVMS provides a PCAP library, which is not a full or complete
implementation of the PCAP functionality found on other platforms. It
is good enough for Ethernet packet dumping, but was
in promiscuitus mode ?
Any help should be welcomed,
Gérard Calliet
___
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
anges, and the actual Vaxen use cluster file system and
cluster queue system, it seems possible to build regular cluster with
the itaniums and add the Vaxen on the top of it. I you think about
impossibilities, could you tell me?
Gérard Calliet
---
L'absence de virus dans ce courrier électron
"robust", easy to maintain? Or specific things about simh on OpenVMS?
Thanks,
Gérard Calliet
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
http://www.avast.com
___
Simh ma
ated disks.
I was in a hurry and working at a customer site, and today I am also in
a hurry.
But I you think worthwhile it, I could re-do the crash and send you some
informations.
Gérard Calliet
___
Simh mailing list
Simh@trailing-edg
, simh also cannot work.
My question is theoretical : why do we need an ip host protocol on the
host interface for simh being able of work with this interface ? It's
perhaps a window / wincap issue.
Don't worry about it : it is only to increese my knowledge. I do go on
with wired a
es ? Are
there possible incompatibilities ?
Any help would be good.
Think you.
Gérard Calliet
<>___
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailman/listinfo/simh
vements on specific implementations
on OpenVMS : better use oh io system, better network integration...
Are there someone who already thought about it ?
Gérard Calliet
___
Simh mailing list
Simh@trailing-edge.com
http://mailman.trailing-edge.com/mailma
43 matches
Mail list logo