Hello!
Okay. I'll set things up for that next.
-
Gregg C Levine gregg.drw...@gmail.com
"This signature fought the Time Wars, time and again."
On Sun, Feb 7, 2016 at 6:33 PM, Mark Pizzolato wrote:
> On Sunday, February 7, 2016 at 1:22 PM, Gregg Levine wrote:
>> Hello!
>> Not yet. I only snagg
On Sunday, February 7, 2016 at 1:22 PM, Gregg Levine wrote:
> Hello!
> Not yet. I only snagged the first three of the 5 series that I could find. For
> example 5.1.3 worked as far as being booted from the stock release.
> (Installation is next.) I'm going to try 5.1.4 and 5.1.5 next. Also 5.2 and
Hello!
Not yet. I only snagged the first three of the 5 series that I could
find. For example 5.1.3 worked as far as being booted from the stock
release. (Installation is next.) I'm going to try 5.1.4 and 5.1.5
next. Also 5.2 and stuff between them, and including your 7
suggestion.
And Mark? I'm i
On 7 February 2016 at 17:53, Rhialto wrote:
> On Sun 07 Feb 2016 at 12:41:19 -0500, Gregg Levine wrote:
>> In this case it was to try and boot an image
>> of 5.1.3 and it worked. I'm going to need to spend more time on this.
>
> I think there may have some NetBSD versions that did not boot on all
Hi Gregg,
I'm not sure what you want me to look at. Please be specific.
- Mark
On Sunday, February 7, 2016 at 9:41 AM, Gregg Levine wrote:
> Hello!
> I'm still not certain what's going on here. But I downloaded a copy of the
> last
> known release from the website, and built it. And then follo
On Sun 07 Feb 2016 at 12:41:19 -0500, Gregg Levine wrote:
> In this case it was to try and boot an image
> of 5.1.3 and it worked. I'm going to need to spend more time on this.
I think there may have some NetBSD versions that did not boot on all VAX
models. This was due to some confusion about how
Hello!
I'm still not certain what's going on here. But I downloaded a copy of
the last known release from the website, and built it. And then
followed the procedures. In this case it was to try and boot an image
of 5.1.3 and it worked. I'm going to need to spend more time on this.
Mark when you ha
Just to confirm latest git src (MicroVAX 3900 simulator V4.0-0 Beta
git commit id: 1cd89258) also works fine for me.
Another random thought, can you confirm you can read the contents of
the ISO image OK outside of simh? It should have an ISO9660 partition
of 1331200.
[I *hate* to be of those who
On the offchance it helps I've attached my config for booting NetBSD-7
on the stock simh-3.9.0nb4 from pkgsrc, and a boot via 'b dua1'. Maybe
if you posted your .simh file and the output again we might be able to
work out whats up? I could also try the latest git source to see if my
config still wo
Hello!
Same problem as before, again with the proper location for the CD as
the VAX emulation knows its there. The routines start as before then
at the prompt I enter boot dua1:. Then the simulation escapes back to
prompt for itself rather then a VAX prompt and that's where I'm stuck.
Oh and this
Hello!
Okay I've tried again to bring things up. This time remembering to
give it dua1: at the prompt instead of something else. It promptly
complained. I'll try one more time this time with the image in the
same directory as the boot script. I've also commented out the
firmware blob since you've c
Hi,
THe key is that it’s DUA one, not Dual. :)
Best,
Zack.
> On Feb 5, 2016, at 9:15 PM, Gregg Levine wrote:
>
> Hello!
> Okay here goes, I'm following these instructions:
> https://www.netbsd.org/ports/vax/emulator-howto.html
>
> And I'm getting this response:
> MicroVAX 3900 simulator V4.0-
Hello!
Yes indeed. I saw that well after I sent off the message. The, ah,
render engine, for FireFox on Linux doesn't properly render the pages
for the NetBSD site. Why? That's asking for too much.
As I said, I'll try again later. But that is good advice. I should
mention that I'm returning to SIM
DUA1 (the one, not the letter L)
Op zaterdag 6 februari 2016 heeft Gregg Levine het
volgende geschreven:
> Hello!
> Okay here goes, I'm following these instructions:
> https://www.netbsd.org/ports/vax/emulator-howto.html
>
> And I'm getting this response:
> MicroVAX 3900 simulator V4.0-0 Beta
Hello!
Okay here goes, I'm following these instructions:
https://www.netbsd.org/ports/vax/emulator-howto.html
And I'm getting this response:
MicroVAX 3900 simulator V4.0-0 Betagit commit id: f03bae6c
sim> do netbsd-boot
RQ1: creating new file
libpcap version 1.4.0
Eth: opened OS device wla
15 matches
Mail list logo