Re: [Sipp-users] (no subject)

Could you please provide sipp’s trace message too? -trace_msg : Displays sent and received SIP messages in __messages.log On 19 Oct 2014, at 17:55, kaan.dan...@gmail.com wrote: Hi all, I am building a testbed with IMS-Bench - OpenSIPS - OpenIMS . In the

[Sipp-users] (no subject)

Hi all, I am building a testbed with IMS-Bench - OpenSIPS - OpenIMS . In the call scenario,I am building an ACK message and sending it from IMS bench to OpenSIPS. But in the ACK message from IMS bench to OpenSIPS, route part is truncated . Related part of the script and wireshark log of

[Sipp-users] (no subject)

Hi Ajana, I looked at the pcap you provided and could see not SIP NOTIFY messages in there, there were some fragmented packets that were not decipherable. . Are you able to provide a pcap with just two packets the SIP NOTIFY and the corresponding 200 OK? Thanks Paul --

[Sipp-users] (no subject)

Thanks Sakharam you have put me on the right track with your comments on the me logging the wrong variable. I have changed the regex to below and now it always logs to the same variable and I once again have a discard variable I simply reference and ignore. I still think the regex support in sipp

Re: [Sipp-users] (no subject)

content as follows. Contact header IP/FQDN = sonusnet.com I think SIPP support for regular expressions is not as powerful as python. Best Regards,Sakharam Thorat. Date: Mon, 7 Jul 2014 19:14:15 +1200 From: idkpmil...@sip2serve.com To: sipp-users@lists.sourceforge.net Subject: [Sipp-users] (no subject

Re: [Sipp-users] (no subject)

I think SIPP support for regular expressions is not as powerful as python. Best Regards,Sakharam Thorat. Date: Mon, 7 Jul 2014 19:14:15 +1200 From: idkpmil...@sip2serve.com To: sipp-users@lists.sourceforge.net Subject: [Sipp-users] (no subject) Hi Sakharam, Thank you for the suggestions but the

[Sipp-users] (no subject)

Hi Sakharam, Thank you for the suggestions but the regex I am tryiung to construct is one that works in sipp for both cases not only one case at a time. using your IP address regex and stripping away the unwanted port match I added that to the regex and it did not provide and error when an IP addr

Re: [Sipp-users] (no subject)

Yes, that should be enough - SIPp handles SIP Digest authentication by itself without requiring regexps.It might be worth logging in with an ordinary softphone (Jitsi, X-Lite, Blink) just to make sure that your username and password are correct, before you start trying to log in with SIPp. Best, R

[Sipp-users] (no subject)

hm...I am not sure, becouse I am doing as told in this document, but still getting 401... So you are saying that is should be enough just like [authentication username=foouser] ? I dont need to fix some regexp top read 401 message and to respond to nonce? Thanks Rob for everything! Regards

Re: [Sipp-users] (no subject)

e.   Demir.   From: Robert Day To: Demir Yavas Cc: "sipp-users@lists.sourceforge.net" Sent: Friday, February 28, 2014 11:53 PM Subject: Re: [Sipp-users] (no subject) Hi Demir, Can you share the XML scenario file you're using, as well as

Re: [Sipp-users] (no subject)

Hi Demir, Can you share the XML scenario file you're using, as well as more details about your setup (SIPp version, OS, etc)? This isn't something I've seen before but I can try and reproduce it with more detail. Thanks, Rob On 28 Feb 2014, at 21:49, Demir Yavas wrote: > Hi All; > > I have

[Sipp-users] (no subject)

Hi All;   I have started SIPp with call-rate 100. Cumulative call-rate is continuously decreasing as started from 100 to  I think to 0(?) (after 1hour 4secs, it is 3.440). I think this is not expected behavior. I would like to learn about the reason of this behavior.   Thanks in advance.   Demir

[Sipp-users] (no subject)

http://spaprima.jp/wp-content/plugins/zauouvequei/shop.php?tip213.html-- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers c

[Sipp-users] (no subject)

http://www.hakusensha.org/ofmgo.html -- For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolutio

Re: [Sipp-users] (no subject)

On Sat, Sep 10, 2011 at 3:42 AM, wrote: > i tried using softphone instead of sipp, its working perfectly. > as per ur i captured the traces, its as below > > > INVITE sip:bob@10.50.26.207:49152 SIP/2.0 > Via: SIP/2.0/UDP 10.50.26.207:6067;branch=z9hG4bK-3356-1-3 > From: "alice" ;tag=33561 > To: "

[Sipp-users] (no subject)

i tried using softphone instead of sipp, its working perfectly. as per ur i captured the traces, its as below   trace_msg logs--- 2011-09-09 14:53:44:740.163UDP message sent (516 bytes):INVITE sip:bob@10.50.26.207:49152 SIP/2.0Via: SIP/2.0/UDP 10.

[Sipp-users] (no subject)

I couldnt keep living paycheck to paycheck I had hit an all time low this allows me to always stay a step ahead!! http://gst.uk.com/ChristopherWood54.html im finally starting to advance in life just give it a try no pressure Dont say I never help anyone! -

[Sipp-users] (no subject)

nothing turned out the way I had planned I had reached my wits end this makes it impossible for me to fall behind... http://ekipa.home.pl/JasonWood82.html now nobody disrespects me this will be worth your time -- 10 Tips

[Sipp-users] (no subject)

nothing turned out the way I had planned I had reached my wits end this makes it impossible for me to fall behind... http://ekipa.home.pl/JasonWood82.html now nobody disrespects me this will be worth your time -- 10 Tips

[Sipp-users] (no subject)

You will find that ordering medication is simple!... http://cristinasoto.com.ar/sites.friend.php?hunaolid=12w5 -- AppSumo Presents a FREE Video for the SourceForge Community by Eric Ries, the creator of the Lean Startup

[Sipp-users] (no subject)

hi all.. can any one send me the commands to send sipp messages using TLS to remote machine. i am using CentOS on both the laptops.. thank you... -- All of the data generated in your IT infrastructure is seriously valua

Re: [Sipp-users] (no subject)

On Tue, Jul 5, 2011 at 6:39 PM, raju veer wrote: > hi all > Can anyone tell me how i can send sipp messages to remote machine > > Just read the docs: http://sipp.sourceforge.net/doc/reference.html -- All of the data gener

[Sipp-users] (no subject)

hi all Can anyone tell me how i can send sipp messages to remote machine -- All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, securit

Re: [Sipp-users] (no subject)

On Thu, Mar 17, 2011 at 4:18 AM, vibha dear wrote: > Dear all, > > > > > > I’m using sipp as a beginner. When I make calls at cps 40 or more maximum > calls get failed. Like for 40 cps I get only 7-8 successful calls. I am not > able to find out why calls getting failed and how to solve out the p

Re: [Sipp-users] (no subject)

Its system dependent I guess, can u check the same in a different machine ;I assume its a linux machine On a Xeon server I was able to push to almost 120 cps once On Thu, Mar 17, 2011 at 12:48 AM, vibha dear wrote: > Dear all, > > > > > > I’m using sipp as a beginner. When I make calls at cps 40

[Sipp-users] (no subject)

Dear all,     I’m using sipp as a beginner. When I make calls at cps 40 or more maximum calls get failed. Like for 40 cps I get only 7-8 successful calls. I am not able to find out why calls getting failed and how to solve out the problem. Can anyone please help me on this issue? 

[Sipp-users] (no subject)

Hi, I am running a SIP scenario in TLS mono socket mode (-t l1) and in 3pcc mode (Controller B side ) - using sipp3.2 source compiled on linux Redhat 5.4 It runs successfully at 14 calls per second for a couple of hours and then I get the message below and the scenario exits with segmentation f

[Sipp-users] (no subject)

Who can help me, thanks. -- Scenario Screen [1-9]: Change Screen -- Port Total-time Total-calls Transport 50603510.72 s 1465 UDP 0 new calls during 1.002 s period 1 ms scheduler resolution 19 calls

[Sipp-users] (no subject)

http://keloyuy.tripod.com/ -- ___ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users

[Sipp-users] (no subject)

http://fapaquw.angelfire.com/ -- ___ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users

[Sipp-users] (no subject)

Click here to find the perfect banking opportunity! Banking http://tagline.excite.com/c?cp=xm4VTZRyGexJgNnXzLqEogAAKZRBWW5iEtVD1MRKoid_TlkbAAYAAADNAAAXeEfjFss=-

[Sipp-users] (no subject)

Hi There,Can someone help me with this scenario ?Looks like there is a workaround to make it works. The below is the scenario I ' m trying to implement but got stuck Thanks a lot! Jecla Suppose A,B and C are 3 parties. A calls B and call is setup. (INVITE,200 and ACK) B places A on HOLD.

[Sipp-users] (no subject)

mmaas...@yahoo.com -- Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing s

[Sipp-users] (no subject)

mmaas...@yahoo.com -- Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing se

Re: [Sipp-users] (no subject)

I understood the problem is. Thanks Richard -Original Message- From: ext Mike Ayers [mailto:mike_ay...@tvworks.com] Sent: Friday, February 27, 2009 7:08 PM To: Bock, Richard (NSN - DE/Munich); sipp-users@lists.sourceforge.net Subject: RE: [Sipp-users] (no subject) > From: Bock, Rich

Re: [Sipp-users] (no subject)

> From: Bock, Richard (NSN - DE/Munich) [mailto:richard.b...@nsn.com] > Sent: Thursday, February 26, 2009 5:30 PM > Using 3.1 the -rsa option is not working. I want to force the > responses to be sent to a specific ip and port regardless the > socket the request was received. Currently the beha

[Sipp-users] (no subject)

Hi, Using 3.1 the -rsa option is not working. I want to force the responses to be sent to a specific ip and port regardless the socket the request was received. Currently the behaviour of sipp is to always send the response on the same socket as the request was received. But this violates the S

[Sipp-users] (no subject)

hi, I'm still new in SIPp (IMS_Bench) I follow the thread "run basic scenario" in  http://www.mail-archive.com/sipp-users@lists.sourceforge.net/msg03130.html how to create thousands users ?? i guess that thousands users must a registered user in HSS , I dont get it , it's impossible if I create

Re: [Sipp-users] (no subject)

hi, Check the RTP/RTCP ports and capture the UDP traces on the linux box and wireshark Thanks, Abinash On Wed, Sep 24, 2008 at 1:08 PM, Shalu Dhamija < [EMAIL PROTECTED]> wrote: > Hi, > > > > I am using SIPP to generate a call with RTP media. But the problem is that > packets are not reaching t

[Sipp-users] (no subject)

Hi, I am using SIPP to generate a call with RTP media. But the problem is that packets are not reaching the network as RTP packets are not seen in Wireshark. I have installed both libnet and libpcap libraries which are essential for sending the RTP packets. I have compiled SIPp to enabl

[Sipp-users] (no subject)

Hi, I am using SIPP to generate a call with RTP media. But the problem is that packets are not reaching the network. I am using Wireshark to see the captured packets on the network. I have installed both libnet and libpcap libraries which are essential for the handling of RTP packets. I

[Sipp-users] (no subject)

Hi,     I just installed sipp-win32-3.1.1.exe on my desktop. Not run it successfully yet. Found most documentations are on unix env. Can some one please tell me the basic steps on how to use it on windows? Thanks much.   Bruce Bai ---

Re: [Sipp-users] (no subject)

Hi, It's strange. Maybe you got CPU overload on the computer running sipp? I don't see any other reasons for it. BR -- Tomasz Radziszewski Senior Software Engineer Ericpol Telecom sp. z o.o. Madalinskiego 9, 30-303 Krakow, Poland e-mail: [EMAIL PROTECTED] http://www.ericpol.com/ > Thank you To

[Sipp-users] (no subject)

Thank you Tomasz, but I forgot in my last post to say that I've already set -l 0.I think it should mean there's no limit to active calls, isn't it? Anyway I have made two tests using different configuration files for my SER. In the first case SER is slower than in the second and SIPp performances

Re: [Sipp-users] (no subject)

WIPRO at Cisco)" <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 05/28/2008 06:42 AM To cc Subject [Sipp-users] (no subject) Hi , I have a Solaris server : SunOS sbc-auto5 5.8 Generic_117350-34 sun4u sparc SUNW,Ultra-5_10 I do not have libnet or libpcap packages installed:

[Sipp-users] (no subject)

Hi , I have a Solaris server : SunOS sbc-auto5 5.8 Generic_117350-34 sun4u sparc SUNW,Ultra-5_10 I do not have libnet or libpcap packages installed: pkginfo | grep *libnet* No match Has anyone installed SIPp with media support successfully on Solaris?If so, can you please guide me on h

Re: [Sipp-users] (no subject)

Hi , Can u refer http://www.tech-invite.com/ I hope this will help you.. On 10/24/07, Алла Нилова <[EMAIL PROTECTED]> wrote: > > Can you help me,i don't know what i should put in the field > P-visited-network-id...may be you give me some examples...i just work with > it?can you help me with RE

[Sipp-users] (no subject)

Can you help me,i don't know what i should put in the field P-visited-network-id...may be you give me some examples...i just work with it?can you help me with REGISTRAR... - This SF.net email is sponsored by: Splunk Inc. S

Re: [Sipp-users] (no subject)

users@lists.sourceforge.net Objet : RE: [Sipp-users] (no subject) Thank you, Is that means that each instance will not monitor on the same port ?(ie : 5060) then Client must have to send each message handling on different port. Regards, PY Selon "Boulkroune, Olivier (Non-HP:Atos Origin)" &l

Re: [Sipp-users] (no subject)

ED] > [mailto:[EMAIL PROTECTED] De la part de > [EMAIL PROTECTED] > Envoyé : mercredi 26 septembre 2007 10:07 > À : sipp-users@lists.sourceforge.net > Objet : [Sipp-users] (no subject) > > Hello, > > I would like to test SIP client with the below scenario. > The problem is t

Re: [Sipp-users] (no subject)

EMAIL PROTECTED] De la part de [EMAIL PROTECTED] Envoyé : mercredi 26 septembre 2007 10:07 À : sipp-users@lists.sourceforge.net Objet : [Sipp-users] (no subject) Hello, I would like to test SIP client with the below scenario. The problem is that SIPP doesn't capture OPTION message and then th

[Sipp-users] (no subject)

Hello, I would like to test SIP client with the below scenario. The problem is that SIPP doesn't capture OPTION message and then there is the following message in trace_err log : 2007-09-21 17:55:51: Aborting call on unexpected message for Call-ID 'yPMLXi-EoIf7EN7W7Cc40MW6vAMMij': while expecting

Re: [Sipp-users] (no subject)

Origin) Envoyé : mercredi 8 août 2007 12:20 À : Klier, Martin; sipp-users@lists.sourceforge.net Objet : Re: [Sipp-users] (no subject) Hello Martin, We are aware this change brought a few problems, including broken key press handling. We are currently working fixing it. Thanks for your

Re: [Sipp-users] (no subject)

, Martin Envoyé : mercredi 8 août 2007 11:35 À : sipp-users@lists.sourceforge.net Objet : [Sipp-users] (no subject) After following correction from 2007-07-12 "Fix:waitpid error when using a combination of external commands and interrupts" the scenario works properly, e.g. the me

[Sipp-users] (no subject)

After following correction from 2007-07-12 "Fix:waitpid error when using a combination of external commands and interrupts" the scenario works properly, e.g. the messages are send correctly, if the combination of external commands and interrupts is used. But in the screen, where the message flo

[Sipp-users] (no subject)

Hi All I am new to Linux. I have installed asterisk in my machine. I have installed sipp 2.0.1 src in my machine. I have to enable authentication in the UAC default scenario. Please tell me how to edit and load such that the authentication of the sip message works. Regards Karthik Cautio

[Sipp-users] (no subject)

Hi, I am sending the following method(NOTIFY) having a xml file from the sipp: But when i am analyzing it in the ethereal then the delimiter to each xml line is shown as \r\n. Is it okay to have \r\n as delimiter?? Or is it just \n ?? I am also attaching the ethereal trace. Any he

[Sipp-users] (no subject)

Hi, I am running a sipp script in which sipp is receiving REGISTER but after this when i am trying to receive INVITE then it is terming it out as an unexpected message. Here is the sipp script:

[Sipp-users] (no subject)

hi; I want to member of this group.. Thanks & Regards Priya -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. - Take Surveys. Earn Cash. Influence the Future of

[Sipp-users] (no subject)

Hi i want to test my sip proxy feature. that is as follows user A --Proxy ---User B user B first register in proxy. user A send INVITE message to User B. first it should be go to proxy and proxy look up the data base where user B regist