Hi all:
I'm using 3.10.2 with audiocodes gateways. Internal calls are fine in
terms of volume. But incoming and outgoing calls via PSTN have very low
volume. Is there anything I can do to increase the volume on these calls
yet maintain the volume on internal calls?
Thanks!
Notice of Confident
On Wed, 2008-10-29 at 16:27 -0700, Charles McParland wrote:
> Just noticed that MD5 numbers for 3.11.4 and 3.11.7 don't match
> those found in the separate respective .md5 files. I have checked
> my md5 calculator on the stable 3.10.1 dist and .md5 files and they
> agree. Also noted that 3.11.7
Sorry, I'm not familiar with how to implement OSBC as I haven't used it
personally. Somebody was supposed to be working on a sipX wiki page I
thought.
Possibly Joegen might help over on the OSBC forum or he watches this one
sometimes too...
> -Original Message-
> From: [EMAIL PROTECTED
It is the same, i get the same problem. It is somehow related with the
network and firewalls. When the users are on the same network (behind
the same public ip address), then we can call and receive calls between
these users. If they are in different networks, then this problem
appear. Is it possib
What if you setup your user agent (softphone / hardphone) to use a stun
server... like stun01.sipphone.com
Mike
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> Sent: Thursday, October 30, 2008 6:18 AM
> To: Picher, Michael
> Cc: sipx-users@list.sipfoundry.org
>
X-lite softphone find it like "Port Restricted Con NAT Firewall".
I tried to stop firewalls in routers and computers. but it looks like
the same situation.
On Thu, 2008-10-30 at 06:10 -0400, Picher, Michael wrote:
> What kind of firewalls are at the remote sites? I've had good luck with
> the ty
What kind of firewalls are at the remote sites? I've had good luck with
the typical Linksys home routers for home users...
Mike
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:sipx-users-
> [EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
> Sent: Thursday, October 30, 2008 5:25 AM
I haven't run into the polycom-polycom-polycom blind transfer issue...
guess the users I have seen in a typical office scenario don't need to
transfer that often.
I also don't usually utilize 550's. 650's and 330's are the norm at
this point. These are all restarting properly with 3.10.2 with 3.
Hi,
i get working sipx with opensbc and i'm continue to trying to tune it to
work better. I have now this problem.
I have problems with callings between internal users in sipx. All users
are in different networks, most of them behind NAT. So the problem is
this. Some of the users are able to call