When I was working on the MP-118, all I had to do is request access from
Audicodes to their site. Took a little time, but I had access to their site
for about 3 days for documentation and firmware.
Andrew
_
From: sipx-users-boun...@list.sipfoundry.org
[mailto:sipx-users-boun...@list
ure SIP Trunks, I think
> they are missing a big market.
>
> Thanks.
>
> -Original Message-
> From: Todd Hodgen [mailto:thod...@verizon.net]
> Sent: Monday, March 15, 2010 2:51 PM
> To: 'Andrew Cotter'; 'Sipx-users list'
> Subject: Re: [sipx-u
In this config are you talking about the Ingate SIParator or Ingate
Firewall. Sounds like what I want to do!
Andrew
> -Original Message-
> From: Tony Graziano [mailto:tgrazi...@myitdepartment.net]
> Sent: Monday, March 15, 2010 5:47 PM
> To: Picher, Michael
> Cc: Andr
: Monday, March 15, 2010 3:51 PM
> To: 'Andrew Cotter'; 'Sipx-users list'
> Subject: RE: [sipx-users] One last attempt - AT&T IP Flex
>
> You may be able to get out of those contracts if they can't
> provide the provisioning that you need, and it really is
mp;T circuits on both ends so I might have a better shot with
this.
I can go into more detail if it would help.
Andrew
> -Original Message-
> From: Todd Hodgen [mailto:thod...@verizon.net]
> Sent: Monday, March 15, 2010 3:13 PM
> To: 'Andrew Cotter'; 'Sipx-users
I thought Alcatel's configuration UI was
> atrocious but I really liked their phones.
>
> Josh Patten
> Assistant Network Administrator
> Brazos County IT Dept.
> (979) 361-4676
>
>
> On 3/15/2010 2:06 PM, Andrew Cotter wrote:
> > So I have finally gotten wo
So I have finally gotten word from AT&T labs that they will not be able to
support SipX and fix our transfer issue.
We have a SIP handoff that is direct (switch in the middle) from their Cisco
router onsite. I asked for them to send signaling on port 5080 (sipXbridge)
but that was a no go. Then
ing they
will do. Other channnels working on this might have a solution to turn
REFER on for me. Wild wild world.
Andrew
_
From: Tony Graziano [mailto:tgrazi...@myitdepartment.net]
Sent: Thursday, February 18, 2010 6:20 PM
To: Picher, Michael
Cc: Andrew Cotter; Sipx-users list
Subje
Anyone have a paddle?
Thank you everyone for the suggestions of the past few weeks. My saga with
AT&T may be coming to an end, unfortunately in a negative way. AT&T is
starting to pull at straws since they have basically denied my requests for
both a port change for signaling (5080 for sipXbrid
: Tony Graziano [mailto:tgrazi...@myitdepartment.net]
Sent: Tuesday, February 16, 2010 7:31 PM
To: Andrew Cotter
Cc: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] Problem with transfers from external calls
I see the AT&T flex Ip is a local gateway. When you created the siptrunk,
did
Nothing is checked.
Is AT&T on your network as an IP or do you traverse a firewall?
On our network.
_
From: Tony Graziano [mailto:tgrazi...@myitdepartment.net]
Sent: Tuesday, February 16, 2010 7:09 PM
To: Andrew Cotter
Cc: sipx-users@list.sipfoundry.org
Subject: Re
on an audiocodes MP118 fxo setup to the same
sipx box.
Andrew
_
From: sipx-users-boun...@list.sipfoundry.org
[mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Andrew Cotter
Sent: Tuesday, February 16, 2010 6:47 PM
To: 'Tony Graziano'
Cc: sipx-users@list.sipfoundry.o
ng.
If I call in from my cell to my desk phone, answer, then try the transfer,
my cell drops off the call.
Closer, but not 100%. Time for a trace?
Bootrom 4.2?
Andrew
_
From: Tony Graziano [mailto:tgrazi...@myitdepartment.net]
Sent: Tuesday, February 16, 2010 6:19 PM
To: Andr
Polycoms 430 and 550. Testing on the 550.
bootrom is 4.1.4 and firmware is 3.1.3RevC split.
Andrew
_
From: Tony Graziano [mailto:tgrazi...@myitdepartment.net]
Sent: Tuesday, February 16, 2010 6:13 PM
To: Andrew Cotter
Cc: mpic...@cmctechgroup.com; sipx-users@list.sipfoundry.org
> Helpdesk Contract Customers:
> http://www.myitdepartment.net/gethelp/
>
> - Original Message -
> From: Andrew Cotter
> To: 'Tony Graziano' ;
> mpic...@cmctechgroup.com ;
> sipx-users@list.sipfoundry.org
> Sent: Tue Feb 16 16:13:19 2010
> Subject: RE: [sipx-us
ment.net
>
> LAN/Telephony/Security and Control Systems Helpdesk:
> Telephone: 434.984.8426
> Fax: 434.984.8427
>
> Helpdesk Contract Customers:
> http://www.myitdepartment.net/gethelp/
>
> - Original Message -
> From: Andrew Cotter
> To: 'Tony Graziano'
for sipXbridge. To make
> sure my calls are coming on in 5080, do I need to request
> that from AT&T?
>
> Andrew
>
> > -Original Message-
> > From: Picher, Michael [mailto:mpic...@cmctechgroup.com]
> > Sent: Tuesday, February 16, 2010 12:47 PM
> >
essage-
> > From: sipx-users-boun...@list.sipfoundry.org [mailto:sipx-users-
> > boun...@list.sipfoundry.org] On Behalf Of Andrew Cotter
> > Sent: Tuesday, February 16, 2010 5:04 AM
> > To: sipx-users@list.sipfoundry.org
> > Subject: [sipx-users] Problem with transfers from e
I will give that a try again. Started down that road and had problems
originally. I'll retrace my steps and see if I can get it to work.
Thanks for pointing that out!
Andrew
> -Original Message-
> From: Tony Graziano [mailto:tgrazi...@myitdepartment.net]
> Sent: Tuesday, February
For anyone using AT&T's IP Flex product, how did you have them configure the
router? DO you have them put a public IP on the SIP trunk port or do you
have them put a private IP address on the port and then have to deal with
NAT?
Working with AT&T now and they are very little help here.
Thanks!
ss it. Routing did the trick. Thank
you all for helping out with this!
Andrew
_
From: Tony Graziano [mailto:tgrazi...@myitdepartment.net]
Sent: Tuesday, January 26, 2010 1:36 PM
To: moeli...@mixtur.com
Cc: Andrew Cotter; sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] Multip
route
should be able to route between the two networks regardless of vlans? Just
want to clarify here.
Thanks!
Andrew
> -Original Message-
> From: Thomas McConnell [mailto:tho...@donaghyltd.co.uk]
> Sent: Monday, January 25, 2010 1:02 PM
> To: Josh Patten
> Cc: Andre
We can add the route, but won't the vlan issue also stop me from gaining
access?
Andrew
> -Original Message-
> From: Josh Patten [mailto:jpat...@co.brazos.tx.us]
> Sent: Monday, January 25, 2010 12:46 PM
> To: Andrew Cotter
> Cc: sipx-users@list.sipfoundry.org
Matt - Congrats on the success!
Our system is up and running, but we have an issue with vlans it looks like.
Any suggested deployment configurations/examples would be great when it
comes to networks. Sorry now if this is a dumb question!
Are layout is as follows:
Data network = 10.0.0
...@myitdepartment.net]
Sent: Monday, January 25, 2010 5:03 AM
To: Andrew Cotter
Cc: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] Multiple IP or NICs on a sipX box
the issue is that six will bind the ips to the proxy. there should onlt be
one. you should not have 2 ip's on the box, period.
Both subnets reside on the same network. Not beyond a firewall. 10. is the
production data network.
I think I need to have him add a route and then data vlan on the pbx port.
We are workign with Juniper EX4200 switches which are pretty advanced and I
think we can add the route right in the swit
At the end of next week we *should* be getting our AT&T IP Flex SIP handoff
installed. This will come from a managed router from AT&T where it will
have 2 handoffs. One for data and one for the SIP trunk. I think it is
going to be a cisco 2800 series router just as a side note.
What I am lookin
Hello,
I am stuck in a situation right now with a network admin insisting on
getting a second IP on a sipx box that is on a totally separate subnet. The
pbx is in the 172.x.x.x range and the data network is 10.x.x.x land. Right
now the box is up and running with about 60 phones an audiocodes mp-
> From: Todd Hodgen [mailto:thod...@verizon.net]
> Sent: Sunday, January 17, 2010 5:23 PM
> To: 'Josh Patten'
> Cc: 'Andrew Cotter'; sipx-users@list.sipfoundry.org
> Subject: RE: [sipx-users] AudioCodes MP-118 and SipX
>
> Nice catch Josh, thanks.
>
&g
Good morning,
I am having an issue with connecting an AudioCodes MP-118 (all FXO) running
firmware version 5.60A.024.003 to Sipx 4.0.4-017289 with 8 copper lines. I
have a Polycom 550 and Cisco 7960 setup for testing.
Problem #1
I can dial in from the outside and get the AA. From there I try a
Good morning,
Has anyone worked with the AT&T IP Flex product in conjunction with sipx?
We are looking at rolling out AT&T's solution at multiple sites throughout
the US. Most are small locations, but we have a concentration of people
here in the northeast US (mainly Connecticut).
Second questio
31 matches
Mail list logo
