On Tue, 2009-07-28 at 15:53 -0700, Max Clark wrote:
> Dave,
>
> The allow connections sip to sip does not exist in the firmware for
> the 5350. Ideas?
Ask Cisco - there must be some way to properly support a REFER.
___
sipx-users mailing list sipx-use
gt;> voice service voip
>> allow-connections sip to sip
>>
>> I believe this option must be set for transfers by the auto attendant or by
>> an extension (phone) to work.
>>
>>
>> -Original Message-
>> From: Max Clark [mailto:max.cl...@gmail.
t; From: Max Clark [mailto:max.cl...@gmail.com]
> Sent: Monday, July 27, 2009 6:01 PM
> To: sipx-users@list.sipfoundry.org
> Subject: Re: [sipx-users] Auto Attendant Transfer Failure
>
> Because I neglected to check earlier - upgrading to the latest stable
> version of sipx (4.0.1
On Tue, 2009-07-28 at 08:48 -0700, Max Clark wrote:
> Scott,
>
> Thank you - the nameservers that the 5350 was set to use could not
> resolve the SRV records. I updated the gateway to point to nameservers
> that properly resolve with no change. I then went one step further and
> set an "ip host" c
Scott,
Thank you - the nameservers that the 5350 was set to use could not
resolve the SRV records. I updated the gateway to point to nameservers
that properly resolve with no change. I then went one step further and
set an "ip host" command on the gateway so that the lookups for the
domain would r
On Mon, 2009-07-27 at 17:39 -0700, Max Clark wrote:
> Hello,
>
> I am having a similar problem to the issue described here:
>
> "Incoming PSTN call through Auto Attendant transfer failure"
> http://xrl.us/be6g8b (Link to www.mail-archive.com)
>
> My configuration is as follows:
>
> TI/PRI -> Ci
Because I neglected to check earlier - upgrading to the latest stable
version of sipx (4.0.1-015823 2009-06-19T07:16:14 ecs-centos5) does
not resolve this issue.
Thanks,
Max
On Mon, Jul 27, 2009 at 5:39 PM, Max Clark wrote:
> Hello,
>
> I am having a similar problem to the issue described here:
>
Hello,
I am having a similar problem to the issue described here:
"Incoming PSTN call through Auto Attendant transfer failure"
http://xrl.us/be6g8b (Link to www.mail-archive.com)
My configuration is as follows:
TI/PRI -> Cisco 5350 Unmanaged Gateway -> sipx -> polycom phone
When an external us
