Hello,

I hope someone cam point me in the correct direction so that I can get system 
imager up and running. I have the following case:

Image Server:
        OS:
                openSUSE 10.2 (i586)
        System Imager SW:
                systemconfigurator-2.2.11-1
                systemimager-i386boot-standard-4.0.2-1
                systemimager-server-4.0.2-1
                systemimager-common-4.0.2-1
                systemimager-i386initrd_template-4.0.2-1

Golden Client:
        OS:
                openSUSE 11.3 (i586)
        System Imager SW:
                systemconfigurator-2.2.11-1.noarch
                systemimager-client-4.0.2-1.noarch
                systemimager-common-4.0.2-1.noarch
                systemimager-i386initrd_template-4.0.2-1.noarch


All the SW installed without reporting errors.

On the Golden Client I issued the following command:
        si_prepareclient --server XXX.XXX.XXX.XXX
without any errors.

On the Image server, I issued:
        si_getimage -golden-client XXX.XXX.XXX.XXX -image Node1 -ip-assignment 
static
and it pulled the image over to the server from the client without any errors.

After issuing the commands si_addclients and si_mkbootserver, I created an 
install CD, si_mkautoinstallcd, and burned it to a 
CD.


I then boot a new system using this CD, and it goes and finds the 'Image 
Server', formats that disk, and transfers the Node1 
image from the image server to this new machine. At this point I get the 
following error,

        ROOTDEV /dev/sda2 under [BOOT] does not exist, check your 
systemconfigurator config
        WARNING: systemconfigurator was not found in the image Node1

I have looked at some previous posts detailing this, but I am not too sure as 
the correct course of action to correct this. On 
the new machine I know that the /dev/sda2 is present as I saw it created prior 
to the image being installed from the miage 
server. This is the contents of the file /etc/systemconfig/systemconfig.conf on 
the Golden client,
        [BOOT]
        ROOTDEV = /dev/sda2
        BOOTDEV = /dev/sda
        DEFAULTBOOT = systemimager

        [KERNEL0]
        LABEL = systemimager
        PATH = /boot/vmlinuz-2.6.34-12-default
        INITRD = /boot/initrd-2.6.34-12-default
        APPEND = root=/dev/sda2 resume=/dev/sda1 splash=silent quiet vga=0x317

I apologise for the length of the email. Any suggestions, hints will be greatly 
appreciated, regards

Peter

------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 
_______________________________________________
sisuite-users mailing list
sisuite-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sisuite-users

Reply via email to