> I highly recommend running "memtest86" (from a boot floppy or CD) in the
> highest mode to make sure you "exercise" your new RAM. It will write and
> read with various data patterns that (hopefully) shows up any issues
> with contamination between adjacent memory bits. ( See
> http://www.memtest8
-Original Message-
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of James Gray
> > Sent: Wednesday, 4 February 2004 12:26 AM
> > To: [EMAIL PROTECTED]
> > Subject: Re: [SLUG] upgrading RAM, what do about swapper partition ?
> >
> > On Wed
On Tue, Feb 03, 2004 at 11:30:57PM +1100, [EMAIL PROTECTED] ([EMAIL PROTECTED]) wrote:
> I have RH73 on P3 with 256MB and 512MB swapper, single IDE 20GB
>
> If i was to increase the RAM, to, say 512MB or 1GB:
>
> can I leave the swapper 'asis' at 512MB ?
Sure.
I dont think that any of my machine
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of James Gray
> Sent: Wednesday, 4 February 2004 12:26 AM
> To: [EMAIL PROTECTED]
> Subject: Re: [SLUG] upgrading RAM, what do about swapper partition ?
>
> On Wed, 4 Feb 2004 12:10 am, [EMAIL PROTECTED] wrote:
>
On Wed, 2004-02-04 at 00:10, [EMAIL PROTECTED] wrote:
> >> can I leave the swapper 'asis' at 512MB ?
> >
> > swap is used when program memory exceeds the physical memory. It them
> > moves some out to disk, this may never happen in your new setup.
>
>
> Ken,
>
> so I can ignore RH docs that te
James Gray wrote:
On Wed, 4 Feb 2004 12:10 am, [EMAIL PROTECTED] wrote:
can I leave the swapper 'asis' at 512MB ?
swap is used when program memory exceeds the physical memory. It them
moves some out to disk, this may never happen in your new setup.
Ken,
so I can ignore RH doc
On Wed, 4 Feb 2004 12:10 am, [EMAIL PROTECTED] wrote:
> >> can I leave the swapper 'asis' at 512MB ?
> >
> > swap is used when program memory exceeds the physical memory. It them
> > moves some out to disk, this may never happen in your new setup.
>
> Ken,
>
> so I can ignore RH docs that tell me
>> can I leave the swapper 'asis' at 512MB ?
>
> swap is used when program memory exceeds the physical memory. It them
> moves some out to disk, this may never happen in your new setup.
Ken,
so I can ignore RH docs that tell me ' swap part should be equal to twice
RAM', good.
as far as physic
On Tue, 2004-02-03 at 23:30, [EMAIL PROTECTED] wrote:
> I have RH73 on P3 with 256MB and 512MB swapper, single IDE 20GB
>
> If i was to increase the RAM, to, say 512MB or 1GB:
>
> can I leave the swapper 'asis' at 512MB ?
swap is used when program memory exceeds the physical memory. It them
mov
I have RH73 on P3 with 256MB and 512MB swapper, single IDE 20GB
If i was to increase the RAM, to, say 512MB or 1GB:
can I leave the swapper 'asis' at 512MB ?
11:25pm up 60 days, 9:45, 5 users, load average: 0.01, 0.02, 0.00
115 processes: 114 sleeping, 1 running, 0 zombie, 0 stopped
CPU sta
10 matches
Mail list logo