[RCSE] NIB Eraser for sale

I almost forgot, I still have the NIB Eraser for sale. Price dropped to $575 + shipping. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]

[RCSE] Experiences with a LBW

Anyone care to relate there experiences with the Little Big Winch and 3M planes, both good and/or bad? Dave RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]

Re: [RCSE] Stuff for Sale

Here's what I have left: > Like new Jaro Mueller Escape, 8 JR high quality > servos. $1050 > > Very good condition Omega 2M, 6 Hitec servos, $325 > > Diamant Fuse and Stab set. Fuse is in good shape. One > of the stab halves need the joiner wire receiver tube > installed. This would make a g

[RCSE] BoT Fuselage update

I'd like to give a progress report on the Bird Of Time fiberglass fuselage plug. I've got the first coat of primer on and sanded down. I have a few hickeys to work through and sand down and then another coat of primer and some 400 grit wet sanding and it's on it's way to the Old Buzzard hisself

Re: [RCSE] Spectrum for MPX?

James It is possible to adapt the Spectrum frequency module to the 4000 and the 3030. If you are interested in the details call Ernie Pritchard at (928) 474 2528. They can also be modified to give both neg and pos frequency shift capability with the transmitters. On Mon, 01 Apr 2002 09:48:26

Re: [RCSE] covering question

Lincoln Ross wrote: >Don't trust my spelling, but: >isopthalic >orthopthalic >vinylester Spelling is nearly the only part of the chemistry of these things I know. The first two aren't quite right: isophthalic orthophthalic That phth group is pronounced like the unvoiced th, as in theraputic.

[RCSE] Photos of building hollow composite structures

Hi all, Does anyone know of any good photographs/articles of hollow composites being built? I know of the Trinitus shots on www.f3j.dk and the Europhia shots on the MRSSA site, but that's about it. The Soaring Stuff video is great for generalities and basic techniques, but not really for layup

Re: [RCSE] Re: 8103 landing mode

You don't need to use the 8103 with the camber and landing mode switched on the stick. You can program the stick so it's always landing mode. Use a switch for launch and for reflex and camber presets. Using a slider for changing camber is definitely over rated. A fixed camber and reflex setting

Re: [RCSE] Is there a better way to kick off CA?

spit on it. -- Stephen Syrotiak Building Service Southern Connecticut http://www.rcgroups.com/forums/index.php?referrerid=4399 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]

Re: [RCSE] covering question

Yes, you are correct.. I forgot about that. Been inland FR too long! Thanks guys - Original Message - From: "Brett Jaffee" <[EMAIL PROTECTED]> To: "Carver, Rusty" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Monday, April 01, 2002 2:00 PM Subject: Re: [

[RCSE] Radios in Switzerland

I just found out I'm moving to Geneva in a couple months. Can I use my American Hitec Flash 5 and Eclipse radios on 72mhz? What about my receivers (555's)? Also if anyone has any good information on flying sites around Geneva I'd really appreciate it. Thanks, Gary PS. I'd like to thank the gr

Re: [RCSE] Nats entry - Where are the forms?

Hi Kevin, Call the AMA, ask for RANDA, or Steve Kaluf, ask them to send you a forms package. As Far as the LSF site, the AMA has asked us to provide only a link, and that they would post access to the forms at the link that they gave us.. Best of luck Jack Strother >From: Kevin Sheen <[EMAIL

[RCSE] Re: covering question

A lot of the PSS guys use this stuff called Solartex. Very tough iron-on fabric that takes primer and paint really well. Get the white stuff and it'll stretch around corners like nothing else. Use some 3M 77 and it'll stick well without bubbles. If you want you can use the fabric itself as the a

[RCSE] Covering Question

Here's another way to cover a balsa over foam wing that I have found works quite well and does not seem to impose a weight penalty as with epoxy. 1. Use water based urethane finish. It goes on easy and produces a hard surface. It can be painted or left natural. Some folks apply UltraKote or s

RE: [RCSE] Good slope sites Sacramento to Bakersfield Ca.

At 11:49 AM 4/1/02, you wrote: >Joe, > >It's across the valley from 99 - you're thinking of I-5! > >Mike Dammit, Mike, I'm a DOCTOR--not a navigator! :) Joe Parsons not even a doctor >-Original Message- >From: Joe Parsons [mailto:[EMAIL PROTECTED]] >Sent: Monday, April 01, 2002 9:36 A