OK, I've read and thought I understood all the other threads about using the Futaba 8 (not Super) with a 5 channel receiver, but I've still not got the thing working properly
I've used GLID2FLP as recommended in Don's book. Channels 1 Left aileron 2 Elevator 4 Rudder 5 Right Flap PMIX 1 Ail-Rud 'On' Link 'Off' Trim 'Off' 2 Ail-CH5 'On' Link 'On' Trim 'On' 3 Rud-Ail 'On' Trim 'On' 4 Rud-Ch5 'On' Link 'Off' Trim 'Off' (As the rudder didn't move Ch5 even with PMIX 2) FLPTRM 'Inh' Ai-Dif 'Inh' (I've done the Ail Dif using ATV and Ch5 using the PMIX values) BFLY 'Switch A' Ail 55 FLP 100 Ele -10 Dly 10 ABK 75 FLP-Ail 'On' 'Null' (Changing values here doesn't do a thing) Ail-Flp 'On' -50 -100 'Null' Ele-Flp 'Inh' V-Tail 'Inh' Start Ail 15 Ele 20 FLP2 -15 FLP1 0 Speed Ail 15 Ele 0 Flp2 -15 Flp1 0 Right, the problems..... When using BFLY only Ch5 operates the right aileron, nothing goes on with the Ch1 left aileeron, which is exactly what happens with both 'Start' and 'Speed' nothing on the Ch1 left aileron. Any ideas guys? (purleeeease!) This is driving me made as the BFLY shows Master to be CH3 which is throttle and slave to be channel 1, but changing the values doesn't do anything. Thanks, in anticipation. Steve RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
