]
Subject: [RCSE] Carbon Fiber Push rods
Can anyone help me locate carbon fiber suitable for push rods measuring
.075 diameter x 53 inches in length? I want to replace the fiberglass
rods in my Sharon.
Thanks in advance
Mike Remus
Fort Wayne IN
Your Dreams are the seedlings of reality
13, 2002 8:38 PM
Subject: [RCSE] Carbon Fiber Push rods
Can anyone help me locate carbon fiber suitable for push rods measuring
.075 diameter x 53 inches in length? I want to replace the fiberglass
rods in my Sharon.
Thanks in advance
Mike Remus
Fort Wayne IN
Your Dreams
as glass
does. You are looking for trouble
Mike
- Original Message -
From: mike remus [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, June 13, 2002 8:38 PM
Subject: [RCSE] Carbon Fiber Push rods
Can anyone help me locate carbon fiber suitable for push rods measuring
.075 diameter
Can anyone help me locate carbon fiber suitable for push rods measuring
.075 diameter x 53 inches in length? I want to replace the fiberglass
rods in my Sharon.
Thanks in advance
Mike Remus
Fort Wayne IN
Your Dreams are the seedlings of reality!!!
Duane Asami wrote:
Aloha Everyone,
W long while ago, I bought a pair of very thin, solid carbon pushrods. Now
I can't seem to recall where I got them from. Any ideas? I know Sullivan
makes carbon rods but I believe their the hollow ones that you screw a short
piece of 2-56 threaded
Use a small piece of shrink tubing and some CA
T
[EMAIL PROTECTED] wrote:
I just bought carbon fiber pushrods for my hlg. What is a good way to
attach them to the control horns? I thought about gluing a bit of a
metal pushrod to the end, but how would you attach the metal to the
carbon?
[EMAIL PROTECTED] wrote:
I just bought carbon fiber pushrods for my hlg. What is a good way to
attach them to the control horns?
Tack them on with CA, then wrap tightly with button thread and add
another drop of CA.
Dave Johnson
RCSE-List facilities provided by Model Airplane News. Send
A short piece of brass tubing can be used at both ends of the pushrod. The
control horn end is bent in an L shape and fits into the control horn. The
servo end may have a length of 1/32" music wire soldered into the brass
tubing and a "Z" bend in the servo end. The tubing is glued to the
8 matches
Mail list logo