xchange" [EMAIL PROTECTED]
Subject: Re: [RCSE] Reversing Hitec Servo
Date: Mon, 25 Dec 2000 13:57:28 -0800
You will destroy your servo if you switch the supply power leads. To
reverse
a servo, switch leads that is connected to each end of the pot and leave
variable resistance lead alone. Al
In a message dated 12/24/00 3:08:57 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
The + and - feeding the servo will be switched when this unit is
hard-wired into the wing.
DON"T DO THIS! - you will very likely smoke the amplifier! Reversing a servo
requires reversing + - to the
I'm looking at a new 85mg+. This servo needs reversing. There are 3
wires running to the pot; Red, yellow, and green. Which two of these
three are the pos. and neg. wires?
The + and - feeding the servo will be switched when this unit is
hard-wired into the wing.
Red is pretty
I'm looking at a new 85mg+. This servo needs reversing. There are 3
wires running to the pot; Red, yellow, and green. Which two of these
three are the pos. and neg. wires?
The + and - feeding the servo will be switched when this unit is
hard-wired into the wing.
I retract my previous
4 matches
Mail list logo
