Follow-up: It doesn't work after power-cycling the box;
behaves just like with the FLASH=Primary setting.
Time to get a CF-to-IDE adapter... Thanks Steve for the idea!
Tamas
> Hi Darrick,
>
> Thanks for the tip! Setting FLASH=Secondary in comBIOS solved the
> problem!
> (I've already tried this
Hi Darrick,
Thanks for the tip! Setting FLASH=Secondary in comBIOS solved the
problem!
(I've already tried this setting with the original comBIOS
1.33 but it didn't help at that time so I gave up on this.)
Now the CF card is _immediately_ detected as:
Pri Mas TRANSCEND LBA
Tamas Vincze wrote:
> Hi,
>
> I purchased a 2GB Transcend CF card (TS2GCF266) for use with net5501
> and copied one of the EMBCop images to it.
> comBIOS 1.33 hasn't recognized the card, but after flashing it to
> 1.33c the card showed up. However GRUB won't auto-boot: it always
> goes to the grub
Tamas,
I've used the Transcend cards, but on most of the Soekris net5501
systems, the cards show up most of the time as Secondary Master. That
doesn't bother me as the boot system I'm using doesn't care where the
drive is, but I could see how grub could be confused (especially if it
changes a
Hi,
I purchased a 2GB Transcend CF card (TS2GCF266) for use with net5501
and copied one of the EMBCop images to it.
comBIOS 1.33 hasn't recognized the card, but after flashing it to
1.33c the card showed up. However GRUB won't auto-boot: it always
goes to the grub> prompt, although grub.conf has t