C'est pas grave ca.. Si les ports -7000 sont bloqués, utilise un serveur
sur un port 8000 ou 8080, regarde sur le site officiel d'undernet pour en
trouver un..
- Original Message -
From: "Jean-Baptiste Vignaud" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, May 03, 2001 1
> > Est ce que tu as tout specifie correctement dans /etc/modules.conf ?
> >
> > Benoit a corrige mon probleme de lenteur en ajoutant une ligne alias
> pour
> > hdlc
> Oui, il me semble, du moins, j'ai ajouté tout ce qui figure dans
> INSTALL...
> De quelle ligne parle tu ?
Je n'ai pas mon disque
oui ca c'est normal
- Original Message -
From: "Olivier ROBLE" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, May 02, 2001 2:07 PM
Subject: [speedtouch] Re: USBDEVFS_BULK
> ok je vais essayer ca
> mais c'est quand meme pas normal lors de l'envoi du microcode j'ai aussi
Est ce que tu as tout specifie correctement dans /etc/modules.conf ?
Benoit a corrige mon probleme de lenteur en ajoutant une ligne alias pour
hdlc
- Original Message -
From: "Jean-Baptiste Vignaud" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, May 02, 2001 4:39 PM
Subject
Dis voir, t'aurais pas un chipset VIA
?
- Original Message -
From:
Olivier ROBLE
To: [EMAIL PROTECTED]
Sent: Wednesday, May 02, 2001 8:19
AM
Subject: [speedtouch] USBDEVFS_BULK
salut
j'ai install le driver de benoit sur une RedHat
7.1 / kernel 2.4.4
Pour des raisons juridiques Benoit l'a supprimie
sur les dernieres versions.
Je t'envoie une copie par mail, ce sera plus
simple.
- Original Message -
From:
Laurent De
Ridder
To: [EMAIL PROTECTED]
Sent: Tuesday, May 01, 2001 12:11
PM
Subject: [speedtouch] microco
Oui j'ai vu tes msgs, j'etais au boulot :)
- Original Message -
From: "Olivier Demah" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, April 30, 2001 9:48 PM
Subject: [speedtouch] Re: irc
> On Mon, Apr 30, 2001 at 06:05:27PM +0200, Cent
Benoit et moi nous sommes retrouves quelques fois sur #speedtouch, sur
undernet,
je propose qu'on s'y retrouve tous.
- Original Message -
From: "Olivier Demah" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, April 30, 2001 5:59 PM
Subject: [speedtouch] irc
> bonsoir,
> existe
Benoit's patch is intented to correct a bug in hdlc module, concerning wait
queues (that's it benoit hmm ? ;) ) and helps pppoa exiting when pppd dies.
But if your disconnection problem is due to hardware pb, this won't help.
- Original Message -
From: "Vincent Thinselin" <[EMAIL PROTECT
Allez voir ca..
http://www.adsl-france.org/contrib/b/a15a7.htm
__
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
http://www.ifrance.com
: ADSL pppd RedHat 7.1
> Salut,
> Oui, Via Apollo Pro, carte mere MSI 6309.
> Je debute sur linux mandrake 8 aujourd'hui.
> Ou je peu trover ka manip a faire pour faire fonctioner le modem USB ADSL
?
> Merci.
> A+
>
>
>
> - Original Message -
> F
Ecoute j'ai eu le meme pb... sur une de mes machines, tu as un chipset VIA ?
- Original Message -
From: "Vincent Thinselin" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, April 25, 2001 3:53 PM
Subject: [speedtouch] ADSL pppd RedHat 7.1
> Bonjour à tous
>
> Avec une RH 7.1
Tu as bien regle les options dans /etc/ppp/peers/adsl ?
Et tu lances pppd call adsl ?
- Original Message -
From: "Thomas Clavier" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, April 25, 2001 10:45 AM
Subject: [speedtouch] Re: Réf. : Re: Réf. : ubsdevfs ?? help
> > pppd aj
Euh... je suis plutot fortement sceptique mais bon mail moi quand meme une
copie, histoire de voir..
- Original Message -
From: "Olivier Demah" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, April 23, 2001 9:54 AM
Subject: [speedtouch] Re: bravo
> On Mon, Apr 23, 2001 at 09:0
- Original Message -
From: "Benoit PAPILLAULT" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, April 20, 2001 7:43 PM
Subject: [speedtouch] Re: probleme de pppd
>
> J'ai l'impression que le support USB n'est pas excelent sur des machines
> un peu ancienne. J'ai un 486DX4-100 e
Pourquoi ya des problemes connus avec les chips VIA
?
- Original Message -
From:
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, April 20, 2001 8:42
AM
Subject: [speedtouch] Re: probleme de
pppd
Quel
est le type de PC ( Processeur? Carte Mere? Chips
> - if you kill pppd manualy, the process reading from pppd will detect
> that its terminal has been closed and exit. However, the other pppoa2
> reading from USB is blocked in reading from USB and keeps running.
>
> That's all I can say. I someone knows the proper way to
Hi Benoit,
when i'm disconnected (cf other messages)
i got that
Apr 19 22:08:20 gateway pppd[3020]: Script /usr/local/bin/pppoa2 -vpi 8 -vci
35 finished (pid 3024), status = 0x0
So i think the driver "timeouts" how can i change timeout delay in the .c ?
___
- Original Message -
From: "Benoit" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, April 19, 2001 7:17 PM
Subject: [speedtouch] pppd is back... :)
> Hi everybody !
> It's my first post on this ML, so please keep cool ! :-)
>
> My system:
> kernel 2.4.3 (not patched)
> ppp
Hello,
unfortunately, disconnects are back..
When it disconnects, i do killall pppoa2
but then when i try to pppd call adsl i got
Apr 19 20:36:26 gateway /etc/hotplug/net.agent: unregister event not
supported
Apr 19 20:36:26 gateway /etc/hotplug/net.agent: unregister event not
supported
Apr 19
Hello,
I think i have solved problem of disconnection by adding this line to
/etc/ppp/peers/adsl
lcp-echo-interval 0
Indeed, in pppd manpage it's said
lcp-echo-failure n
Si cette option est passee, pppd supposera que le
correspondant est mort si n echo-requests L
0952K used, 2792K free, 712K buffers
Swap:64508K total, 4420K used,60088K free, 5300K cached
And for now no disconnection.
It seems to be hazardous so, difficult to catch :(
Thanks for your great work!
>
> Benoit
>
> On Wed, 18 Apr 2001, CentaureZ wrote:
>
Hi,
i had some problems with alcatel driver's so I tried Benoit's ones, that
lets me connect with no problem. But after some time i am disconnected (the
same as with alcatel's drivers). I don't know why.
First, i have
Debian
Kenel 2.4.3, no patch applied
pppd version 2.4.0 not patched
usb uhci
Hi,
Have you tried to unload usb-uhci.o ? and then
reload it ?
- Original Message -
From:
Blandford, Simon [BSS Audio UK]
To: '[EMAIL PROTECTED]'
Sent: Tuesday, April 17, 2001 9:46
AM
Subject: [speedtouch] Getting microcode
to load
Hi,
I am hav
Have you mounted usbdevfs ?
Be sure to do it, as explained in the file "install"
- Original Message -
From: "dids" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, April 16, 2001 10:57 PM
Subject: [speedtouch] Re: I have got the following msg - help ?
> Hi, here is some info f
humm big lol :)
- Original Message -
From:
Andrew Harris
To: [EMAIL PROTECTED]
Sent: Monday, April 16, 2001 7:48
PM
Subject: [speedtouch] Fw: Speedtouch
Drivers
Sorry just noticed that these drivers are for
linux please kick me in the b^&%$£cks
- Origin
Hmmm you want to irritate Benoit.. :)
As said earlier many times, Benoit's drivers don't even need patched patched
pppd . use standard pppd and it should work.
- Original Message -
From: "jazz" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, April 14, 2001 2:54 PM
Subject
Congratulations! Really good work.
- Original Message -
From: "Benoit PAPILLAULT" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, April 12, 2001 10:46 AM
Subject: [speedtouch] upload pb solved
>
> I think I solved the upload problem. Up to now, I was not getting upload
over
Salut Benoit,
J'aimerais savoir si, concernant uhci a tu reussi a obtenir une connexion
stable dans les dernieres versions de ton driver.
Les drivers d'alcatel sont vraiment trop instables.
__
ifrance.com, l'email gr
Don't forget that you musn't load speedtouch.o module, Benoit's driver
doesn't need it. It should work.
And also don't forget to put in /etc/fstab
/dev/usb /proc/bus/usb usbdevfs
If it doesn't work, try lauching modem_run several times
- Original Message -
From: "Neal Derry" <[EMAIL PR
> dois-je patcher le noyau ou koi ke ce soit d'otre pour ke le mode sync
soit
> reconnu ?
tu n'as pas besoin de patch particulier pour le noyau (a part evidemment le
patch atm)
__
ifrance.com, l'email gratuit le plus c
Hmmm...it seels journalists are again speaking of something they don't know
I think they speak about the fact you can telnet into the modem, and there's
also a webserver builtin. With telnet you can reboot the modem, reset the
connection,etc..
BUT, you can't do that by the internet, you can only
4 (0) 794 165 2804
> "La force humaine reside dans sa capacité à se depasser"
> - Original Message -
> From: "CentaureZ" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Monday, April 09, 2001 10:09 PM
> Subject: [speedtouch] Re: modem_r
- Original Message -
From: "Benoit PAPILLAULT" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, April 09, 2001 10:06 PM
Subject: [speedtouch] Re: modem_run
> On Mon, 9 Apr 2001, CentaureZ wrote:
>
> > If I use modem_init + modem_diag it tell
- Original Message -
From: "Benoit PAPILLAULT" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, April 09, 2001 2:20 AM
Subject: [speedtouch] Re: modem_run
>
> 1 - timeout errors are "normal" (humm ... )
The problem is that it fills all my screen.. Can i remove them?
> 2 - c
- Original Message -
From: "Rakotomalala Renaud" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, April 09, 2001 2:28 AM
Subject: [speedtouch] Re: modem_run
> > Hello,
> >
> > I'm trying to use modem_run rather than mgmt cause it seems to cause
some
> > bugs. But when i call it
because i killed modem_run or could it be something else?
- Original Message -----
From: "CentaureZ" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, April 07, 2001 1:55 AM
Subject: [speedtouch] Re: Trying to use Tony's code
> - Original Message -
I had the same problem... using pppd i compiled myself, but using pppd
someone on this list sent me it works..
Mail me if want you want a copy.
- Original Message -
From: "Benoit PAPILLAULT" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, April 08, 2001 10:12 PM
Subject: [speed
- Original Message -
From: "Benoit PAPILLAULT" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, April 06, 2001 8:19 PM
Subject: [speedtouch] Re: Trying to use Tony's code
>
> Ok. It seems I need to write new HOWTOs ...
You should ;)
> The proper way to use Tony or my code i
Hello,
As i get hangs with alcatel drivers, i'm trying to use tony's code which
seems to work better on uhci than benoit's (as i read here) but i don't know
what to do to initialize the connection.
Is this correct :
./modem_init microcode.bin
./modem_run
This gives errors, but finally says "ad
Hello,
I read there that someone use bridging and this can cause problems.. How can
i know if i use pppoe bridging ? I'm in France
Thanks!
__
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails dep
- Original Message -
From: "Christophe GARDE" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, April 06, 2001 2:34 PM
Subject: [speedtouch] Re: Machine hangs
>
> Le 2001.04.06 14:09:57 +0200, CentaureZ a écrit :
>
> > I succeeded mak
No, i'm not.. thanks even!
- Original Message -
From: "johan verrept" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, April 06, 2001 2:48 PM
Subject: [speedtouch] Re: Machine hangs
> CentaureZ wrote:
> >
> > Hello,
> >
> >
- Original Message -
From: "Renaud Rakotomalala" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, April 06, 2001 1:30 PM
Subject: [speedtouch] Re: Machine hangs
> > Hello,
> >
>
> Hi,
>
> > I succeeded making the modem work, but sometimes the machine hangs :(
> >
> [../..]
> >
Hello,
I succeeded making the modem work, but sometimes the machine hangs :(
I use only software from alcatel, even mgmt, as i wasn't able to compile
modem_init.c and modem_diag.c
Does someone know this problem? (I have no smp in my kernel)
I'm wondering if mgmt is not the cause.. so can someo
Hello!
Cool! What do you use, OHCI ?
Do some succed with UHCI ?
- Original Message -
From: "Stuart Luscombe" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, April 04, 2001 11:25 PM
> I am now connected under Linux using Tony's edited code.
>
> The only thing I have notic
Hi,
I succedeed in initializing my modem (i think), as the leds goes off, then
blink red, and finally switch to plain green.
But when I try to launch pppd it dies with
Illegal instruction
What's wrong, i used a precompiled .deb version, as i can't even compile it.
I think that's because I didn'
Hello,
I didn't succed in compiling modem_init.c what's the command line to build
it?
Thanks!
__
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails depuis un navigateur, en POP3, sur Minitel, sur
; Benoit
>
> On Tue, 3 Apr 2001, CentaureZ wrote:
>
> > Bonjour,
> >
> > Juste une question, cela ne concerne pas les drivers de Benoit. Je crois
> > avoir lu que le 0.38 dans /etc/ppp/options n'est pas correct car cela
> > correspon
Does anyone use a debian because I don't any log in /var/log/messages so I
can't know if the modem is initialized ok or not. The two leds are green is
this ok?
__
ifrance.com, l'email gratuit le plus complet de l'Intern
> C'est vrai qu'une certaine confusion s'est installe. Disons que l'on peut
> installer 'les' drivers de trois manieres:
>
> * la solution 100% Alcatel :
>
> telecharger les binaire (mgmt) + source (speedtouch.c)
> sur leur sites. A noter que speedtouch.c est en GPL.
> Apparemment, bcp de gens on
Bonjour,
Juste une question, cela ne concerne pas les drivers de Benoit. Je crois
avoir lu que le 0.38 dans /etc/ppp/options n'est pas correct car cela
correspond au réseau anglais. Quelle est la valeur correcte a entrer ?
Merci!
___
Hope that drivers will work with Via cards!! I have bought such one
Good for you anyway :)
- Original Message -
From: "Christophe GARDE" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, April 03, 2001 6:05 PM
Subject: [speedtouch] Re: Ready to test ... go!
> Aujourd'hui est u
> En fait bcp n'utilise pas le driver officiel car il n'est pas stable et
que
> la vitesse d'upload est catastrophique.
> Personnellement j'utilise les composant du 31/03/01 de benoit
> modem_init/microcode.bin et modem_diag, et la version patché de pppd pour
> ATM et le module speedtch.
Pourtan
Bonjour,
j'ai décidé d'installer mon speedtouch usb sous linux mais j'avoue etre un
peu confus entre toutes les pages de howto... Il y a plusieurs drivers
apparemment.. Lequel fonctionne le mieux? J'ai lu que certains n'utilisent
pas le driver d'alcatel mais un driver "alternative" car celui de a
55 matches
Mail list logo
