This patch adds platform side support code for the EP93xx SPI driver. This
includes clock, resources and muxing. There is a new function:
ep93xx_register_spi()
which can be used by board support code to register new SPI devices for the
board.
Signed-off-by: Mika Westerberg
Acked-by: H Hartley Sw
This patch adds an SPI master driver for the Cirrus EP93xx SPI controller found
in EP93xx chips.
Signed-off-by: Mika Westerberg
Signed-off-by: H Hartley Sweeten
Acked-by: H Hartley Sweeten
Cc: Ryan Mallon
Cc: David Brownell
Cc: Grant Likely
Cc: Martin Guy
---
Documentation/spi/ep93xx_spi
Hello,
This series implements SPI master driver for Cirrus Logic EP93xx SPI
controllers.
Changes to previous (v6) version:
- only cosmetic non-functional changes (removed unnecessary comments and
few inlines) based on review comments by H Hartley Sweeten
Tested on TS-7260 (ep93
Manjunath,
> > > > > > > +
> > > > > > > +static void omap_ethernet_init(void)
> > > > > > > +{
> > > > > > > + gpio_request(ETHERNET_KS8851_POWER_ENABLE, "ethernet");
> > > > > > > + gpio_direction_output(ETHERNET_KS8851_POWER_ENABLE, 1);
> > > > > > > + gpio_request(ETHERNET_KS8851_QUART, "quart
> -Original Message-
> From: linux-omap-ow...@vger.kernel.org
> [mailto:linux-omap-ow...@vger.kernel.org] On Behalf Of G,
> Manjunath Kondaiah
> Sent: Thursday, May 06, 2010 8:45 AM
> To: Arce, Abraham; Tony Lindgren
> Cc: linux-o...@vger.kernel.org;
> spi-devel-general@lists.sourcefo
> -Original Message-
> From: Arce, Abraham
> Sent: Thursday, May 06, 2010 6:18 AM
> To: Tony Lindgren
> Cc: G, Manjunath Kondaiah; linux-o...@vger.kernel.org;
> spi-devel-general@lists.sourceforge.net
> Subject: RE: [PATCH v1 2/3] OMAP4: Ethernet: KS8851 Board Support
>
> > > > > +
> >
> > > > +
> > > > +static void omap_ethernet_init(void)
> > > > +{
> > > > + gpio_request(ETHERNET_KS8851_POWER_ENABLE, "ethernet");
> > > > + gpio_direction_output(ETHERNET_KS8851_POWER_ENABLE, 1);
> > > > + gpio_request(ETHERNET_KS8851_QUART, "quart");
> > > > + gpio_direc
* Arce, Abraham [100505 00:05]:
> From: Syed Rafiuddin
>
> Add OMAP4 data to allow McSPI driver built
>
> Signed-off-by: Syed Rafiuddin
> Signed-off-by: Shubhro
> Signed-off-by: Santosh Shilimkar
> Signed-off-by: Abraham Arce
> ---
> drivers/spi/Kconfig |6 +++---
> 1 files changed, 3
* Arce, Abraham [100505 01:06]:
> Manjunath,
>
> > > +
> > > +static void omap_ethernet_init(void)
> > > +{
> > > + gpio_request(ETHERNET_KS8851_POWER_ENABLE, "ethernet");
> > > + gpio_direction_output(ETHERNET_KS8851_POWER_ENABLE, 1);
> > > + gpio_request(ETHERNET_KS8851_QUART, "quart");
> > > +
On Tue, May 04, 2010 at 12:21:36PM -0500, H Hartley Sweeten wrote:
> That patch is already present in linux-next. If Russell think there might
> be an issue you could rebase this patch on the linux-next tree.
If this patch depends on 5998/1, then I'll take it via the ep93xx branch
(which has 5998
The PL022 SPI driver did not cleanly separate between the
original unmodified ARM version and the ST Microelectronics
versions. Split this more cleanly and fix some whitespace
moaning from checkpatch at the same time.
Signed-off-by: Linus Walleij
Cc: stericsson_nomadik_li...@list.st.com
Cc: Aless
2010/5/3 H Hartley Sweeten :
> On Sunday, May 02, 2010 5:19 PM, Linus Walleij wrote:
>> When I look at this it's quite obvious that this is the same hardware or very
>> close (maybe a redux version) of the thing supported by
>> drivers/spi/amba-pl022.c.
>>
>> What is the difference really? I suspe
Manjunath,
> > +
> > +static void omap_ethernet_init(void)
> > +{
> > + gpio_request(ETHERNET_KS8851_POWER_ENABLE, "ethernet");
> > + gpio_direction_output(ETHERNET_KS8851_POWER_ENABLE, 1);
> > + gpio_request(ETHERNET_KS8851_QUART, "quart");
> > + gpio_direction_output(ETHERNET_KS8851_QUAR
> -Original Message-
> From: linux-omap-ow...@vger.kernel.org
> [mailto:linux-omap-ow...@vger.kernel.org] On Behalf Of Arce, Abraham
> Sent: Wednesday, May 05, 2010 12:40 PM
> To: linux-o...@vger.kernel.org;
> spi-devel-general@lists.sourceforge.net
> Subject: [PATCH v1 2/3] OMAP4: Ethe
From: Syed Rafiuddin
Change dependency to ARCH_OMAP2PLUS to allow systems based on
omap24xx, omap34xx or omap44xx
Signed-off-by: Syed Rafiuddin
Signed-off-by: Abraham Arce
---
drivers/spi/Kconfig |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/Kconfig
Enable Micrel KS8851 SPI network chip for OMAP4430
Signed-off-by: Abraham Arce
---
arch/arm/mach-omap2/board-4430sdp.c | 30 ++
1 files changed, 30 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c
b/arch/arm/mach-omap2/board-4430sdp.
Enable KS8851 SPI support +
Networking Support
- Packet Socket
- TCP/IP
Network Filesystems
- NFS Client
- Root Filesystem on NFS
Signed-off-by: Abraham Arce
---
arch/arm/configs/omap_4430sdp_defconfig | 57 +-
1 files changed, 55 insertions(+), 2 delet
From: Syed Rafiuddin
Add OMAP4 data to allow McSPI driver built
Signed-off-by: Syed Rafiuddin
Signed-off-by: Shubhro
Signed-off-by: Santosh Shilimkar
Signed-off-by: Abraham Arce
---
drivers/spi/Kconfig |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/spi
Enable network chip Micrel KS8851 for OMAP4430 SDP
- Based on mainline version 2.6.34 rc6
- Tested in OMAP4430 SDP
Throughput measurements using nuttcp application:
11.9375 MB / 10.06 sec =9.9519 Mbps 92 %TX 0 %RX 0 retrans 7.87 msRTT
Patches
[PATCH v2 1/3] OMAP4: SPI: Fix Driver Kconfi
19 matches
Mail list logo
