hi hannes & other authors As described in [Link-State Info Distribution using BGP] (see Section 3.2.2, “Link Descriptors”), the IP address TLVs (TLV code 259-262) or the link local/remote Identifier TLV (TLV code 258) are included in the link descriptor. “The information about a link present in the LSA/LSP originated by the local node of the link determines the set of TLVs in the Link Descriptor of the link. If interface and neighbor addresses, either IPv4 or IPv6, are present, then the IP address TLVs are included in the link descriptor, but not the link local/remote Identifier TLV. The link local/remote identifiers MAY be included in the link attribute. If interface and neighbor addresses are not present and the link local/remote identifiers are present, then the link local/remote Identifier TLV is included in the link descriptor.”
When the underlying IGP is IS-IS, LSP originated by the local node of the link MAY NOT include IPv4 interface address/IPv4 neighbor address or Link Local/Remote Identifiers sub-TLV in the (main) IS reachability TLV when MPLS Traffic Engineering is not configured for IS-IS (see Section 3.2, “ Sub-TLV 6: IPv4 Interface Address”, of [RFC5305] and Section 1.1, “Link Local/Remote Identifiers”, of [RFC5307], respectively). Thus, BGP-LS speaker MAY learn the mentioned link information, from LSP flooding process, without detailed interface IP/ID information of all IGP nodes in the BGP-LS domain. If CONSUMER collect link-state information of whole domain only from one BGP-LS speaker, it can only establish one SPT , which root is the BGP-LS speaker. In some case, CONSUMER need create different SPT for different device. For example, in central spring network, the CONTROLLER need download ILM entry for a global label to each router, the ILM forwarding information is decided by each router's SPT. It is different for different router. some solutions could be: 1) all IGP nodes in the BGP-LS domain are BGP-LS speakers, where only local link information need to be collected and sent to CONSUMER. 2) one BGP-LS speaker, but all link are configured MPLS Traffic Engineering(not certainly including signal configuration). Do you have any suggestions about this issue? thanks deccan -------------------------------------------------------- ZTE Information Security Notice: The information contained in this mail (and any attachment transmitted herewith) is privileged and confidential and is intended for the exclusive use of the addressee(s). If you are not an intended recipient, any disclosure, reproduction, distribution or other dissemination or use of the information contained is strictly prohibited. If you have received this mail in error, please delete it and notify us immediately. -------------------------------------------------------- ZTE Information Security Notice: The information contained in this mail (and any attachment transmitted herewith) is privileged and confidential and is intended for the exclusive use of the addressee(s). If you are not an intended recipient, any disclosure, reproduction, distribution or other dissemination or use of the information contained is strictly prohibited. If you have received this mail in error, please delete it and notify us immediately.
_______________________________________________ spring mailing list spring@ietf.org https://www.ietf.org/mailman/listinfo/spring