On Tuesday 05 August 2003 19.30, Downing, Mark wrote:
I have finally figured out how to make the squid_ldap_auth work
with an Active Directory tree that one of our divisions has setup.
My problem is now how to I configure squid to work with BOTH
msnt_auth and squid_ldap_auth. I still need to
On Sunday 10 August 2003 15.37, Farid IZEM wrote:
Which helpers must i use to authenticate my users against W2K AD
The LDAP helpers works fine for this purpose.
??? How do i configure it ???
See the documentation to the LDAP helpers.
Does i need Samba to do so ???
No, but using Samba
On Monday 11 August 2003 00.49, Bob Arctor wrote:
3)it is _only_ way to balance traffic if you have multiple slow
lines (like few dialups, like i do have)
It is the only way to balance traffic for the same large download
request on multiple slow dial up lines not supporting bonding. On
this I
Just have default gateway of NIC1 as normal (ip = 192.168.0.1) which will
get the pages from internet, then add second nic and change the listen
addresses to the IP of new NIC2, i.e listen on port 192.168.0.2:8080.
Suggest you 'team' multiple NICS together as the listening NIC, compaq/Intel
have
On Friday 08 August 2003 17.29, Dave Serls wrote:
Is there a patch to 2.5.x or code on the horizon to stipulate
compressed cache-to-cache transfers of parent hits?
Not for squid-2.5.
There is plans on adding Transfer-Encoding support in a later Squid
version, maybe Squid-3.1 but the exact
squid_user wrote:
Hello everyone,
I ve been useing squid for about 1 year. I didnt notice that earlyer
but last
time i found taht when i want to open some WWW pages then i have to
wait about sometimes 10-15 sec before browser show me something.
Is that normal ? or maybe i should add something to
ok, i changed the error language to english, this is the error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: registernet.passport.net:443
The following error was encountered:
it accelerates in two ways :
1)if you have more than one connection to the internet, and your proxy does
load balance, or you have multiple interfaces in your machine, multiple
parts of file are downloaded via multiple connections
2) if server is load balanced, and it's domain have many
unfortunatelly not everywhere in the world ISP's support it :(
and second - imagine scenario where you're connected via your mobile phone,
which does roaming, and keeps you online , and also using 802.11x
infrastructure (if it is available)
i know IP layer load balancing is much more
[EMAIL PROTECTED] wrote:
Hi all
How can I authenticate windows NT/2000 domain users with squid.Can squid be
integrated to use Windows Authentication.
Any suggesstions /solutions.
Check the Squid FAQ.
M.
there are traffic shapers and QoS services which prevent links from being
monopolised.
and if he just hacked 10 phone boxes, he would be glad that upload will
finish 10x faster, so he can escape more quickly ;)
On Monday 11 August 2003 09:18, Henrik Nordstrom wrote:
On Monday 11 August 2003
On Sun, 2003-08-10 at 18:31, Joshua Brindle wrote:
which specifically returns the request header, is there a way
to make this check which side of the request we are on, or
will a new type %{reply:header} or whatever need to be
created? I'll play around with this a bit but I'd like the
Right got it working now :)) domain name was link51 but in netbios is
link_51 lol
slox:~ # smb_auth -W link_51 -S /software/proxyauth.txt -d
adean elizabeth
Domain name: link_51
Pass-through authentication: no
Query address options:
Domain controller IP address: 151.151.3.202
Domain controller
Hi
I,m running Master squid 2.4 (10.10.10.1)on one redhat 7.3 server and
another slave squid 2.4(10.10.10.2) server.
All request coming to 10.10.10.2 needs to be transferred to 10.10.10.1.
cache_peer is added in slave proxy
cache_peer 10.10.10.1 parent 80 3130 proxy-only
Browsing is
I got squid-ncsa_auth-2.5.STABLE3-2.i586.rpms from
web. I installed this rpm but still get following
error after squid reconfigure.
2003/08/11 14:40:21| aclParseAclLine: IGNORING: Proxy
Auth ACL 'acl anta proxy_auth REQUIRED' because no
authentication schemes are fully configured.
Did you setup
Hi all
How can I authenticate windows NT/2000 domain users with squid.Can squid be
integrated to use Windows Authentication.
Any suggesstions /solutions.
Rgds
Azad
This mail was scanned by Interscan Virus Wall of Mailserver2 at SNR, TCS, Chennai
Hi
I`m having problems with trying to get smb_auth to work
the error i get is below
slox:~ # smb_auth -W link51 -U 151.151.3.202 -S /software -d
adean elizabeth Domain name: link51 Pass-through
authentication: no Query address options: -U 151.151.3.202 -R
Domain controller IP address:
On 11 Aug 2003, Robert Collins wrote:
Ermm, you don't need bonding for load balancing here: A simple /32 route
on each dial up interface in the ISP, and propogated using some IGP (one
ISP needed) will allow traffic to be roughly-distributed over multiple
links with disparate IP's.
True, but
Forwarded to list; rearranged for readability
squid -k parse has no errors
cache.log has a error in it
2003/08/11 15:53:12| ipcCreate: /usr/local/smb_auth: (13) Permission denied
also now when i try to authenticate askes 3 times and then fails now say
this cache requires authentication but
'Multiple cache disks', does that included hardware raids,
because that are also 'multiple disks'.
I would assume it does not, but I don't think that was
specifically discussed.
However, one item that has come up repeatedly it to NOT
use RAID5 with Squid, because Squid's use of disk (many,
Hi Gustavo:
There is a service here in Brazil that uses the Skymaster 630e
(http://www.gilat.com/Products_Skystar360e_OverView.asp) modem. It
communicates via satellite and it have a huge delay in the requests...
so browsing the Internet isn't possible, to solve that they provide a
Internet Page
On Sunday 10 August 2003 9:05 pm, Bob Arctor wrote:
axel is an download 'accelerator'
originally it splits file to parts (equal) , opens local file , and
download it.
Pardon my ignorance, but how does this accelerate anything?
What sort of bottleneck (where) between server and client does
Now if user is accessing from WIN 98 machine. I think When
browser opens it It shoud prompt for Username and password.
Then If I enter username and password matching from passwd
file it should permit to access internet as per acls.
Basically - yes, that is how it works.
Setting up an acl
I am trying to compile Squid-2.5.3 on RedHat Linux 9.0 (kernel 2.4.21 with
ip_wccp.patch patched into the precompile includes). I ran the wccpv2.patch
against the precompiled squid source and ran the configure script
with --linux-netfilter , --delay-pools, --snmp, and --wccpv2 options
enabled.
In my Windows network i installed SQUID 2.5 STABLE1 and
SAMBA 2.2.5 on a Linux Debian 2.4.19 box.
We have NTLM auth working successfully; Squid 2.5STABLE3,
Samba 2.2.8a and Windows 2000 AD. Clients use a mix of
IE 5.01, IE 5.5, and IE 6. So it should work for you.
The only other suggestion I
On Mon, 2003-08-11 at 17:53, Henrik Nordstrom wrote:
On Monday 11 August 2003 00.49, Bob Arctor wrote:
3)it is _only_ way to balance traffic if you have multiple slow
lines (like few dialups, like i do have)
It is the only way to balance traffic for the same large download
request on
Alvaro Gordon-Escobar wrote:
I just got squip up and running.
I want to block .exe .zip .msi and .vbs cmd.exe root.exe etc.
I don't want people to download this files. especially becuase my file server is
running low on space.
I want o block these files from HTTP and FTP.
I tried to block
Yes I have used rpm -ql and found out location.
So my command in .conf file is
auth_param basic program /usr/lib/squid/ncsa_auth
/usr/local/squid/etc/passwd
I have created password file. path
/usr/local/squid/etc/passwd. tried to creat username
and passowd by command
[EMAIL PROTECTED] root]#
Ok, this was the problem. Creating/adding users with the d flag works. I
wont touch anything else =)
Lets try with chpasswd now (http://web.onda.com.br/orso/chpasswd.html).
After installing it, whats the URL of the cgi?
Lets supose my hostname is pepe.emp.com and the cgi is installed in
Pada 10-Aug-2003, Imad Soltani menulis:
On Wed, 2003-08-06 at 04:41, [EMAIL PROTECTED] wrote:
Pada 09-Aug-2003, Imad Soltani bilang:
Hello ,
The following error was encountered:
Unable to determine IP address from host name for
rev.host-160.201.tiscali-business.fr
The
On Monday 11 August 2003 11.19, [EMAIL PROTECTED] wrote:
ok, i fixed the problem.
it was never_direct allow SSL in my config
but i get another error with Zero Sized Reply in the faq there
is an article about it, but nothing really helpfully thins.
Maybe you are bitten by broken web servers
On Monday 11 August 2003 8:34 pm, Alvaro Gordon-Escobar wrote:
Does any one have a scritp that will setup the proxy configurations on
upon user logon?
You'll need to define login.
What Operating System are the users logging in to; what mechanism is used to
authenticate them?
Antony.
--
On Monday 11 August 2003 02.52, Mathew Thomas wrote:
How can I configure the squid and network-card so that one netwok
card will be used for talking to the faculty proxy servers and
another card for fetching the pages from internet? I believe, this
way things might be little faster.
One more
See the Samba installation instructions.
Regards
Henrik
On Friday 08 August 2003 10.57, Mueller, Thomas wrote:
Ok, i just found out that the winbind deamon was the old one from
the SuSE rpm package 2.2.7a but I have installed Samba 2.2.8a.
The wbinfo -a returned an error with the 2.2.7a.
On Monday 11 August 2003 16.44, Adam Aube wrote:
if i only want the users on my lan (Windows 98 and 2000, IE 6.0)
to authenticate to a users list in the linux proxy, which is the
authentication program that i ve to use? I tried to do it with
NCSA, but it didnt worked (Is it supposed to??).
Forwarded to list; rearranged for readability
Have changed that now, but makes no difference :( well spotted thow :)
cheers
andy
-Original Message-
From: Adam Aube [mailto:[EMAIL PROTECTED]
Sent: 11 August 2003 16:00
To: [EMAIL PROTECTED]
Subject: RE: [squid-users] smb_auth fixed
I just built a squid proxy server using Redhat 9, squid-2.5.STABLE1-2,
Kernel 2.4.20-19.9
I patched the RH kernel with the ip_wccp-2_4_18.patch from Vissolve and
squid with the wccpv2 patch. I am using IP tables to redirect port 80
to port 8080 of the squid server. I have confirmed squid and
37 matches
Mail list logo