Hello,
I have a question about accel mode special configuration...
Is it possible to have this configuration with SQUID3-PRE3 :
User -[https on port 1443]-> Reverse Proxy --[http on port
80]--> Original server
User -[https on port 2443]-> Reverse Proxy --[http on port
configure squid in httpd_accelerator mode and it will give the
X_Forwarded_For header to your web server unless to set it up
to anonymize such a feature
Original message
>Date: Mon, 8 Sep 2003 09:49:45 -0700
>From: "robert schwartz" <[EMAIL PROTECTED]>
>Subject: [squid-users] Reverse
hi guys
can overwrite the store.log because now the size of this log is 170Mb ,with
an another store.loc empty ???
Andrea Soccal
IT Sistema Ufficio
[EMAIL PROTECTED]
Please use a browser which actually displays the error and does not
substitute it with a generic error message the browser vendor thinks
is better than the real error.
It is impossible to understand what the real error is if it is not
shown.
Note: It is possible to convert MSIE to such browser
On Tuesday 09 September 2003 09.58, [EMAIL PROTECTED] wrote:
> Hello,
>
> I have a question about accel mode special configuration...
> Is it possible to have this configuration with SQUID3-PRE3 :
>
> User -[https on port 1443]-> Reverse Proxy --[http on
> port 80]--> Original serve
On Tuesday 09 September 2003 11.19, Soccal Andrea wrote:
> hi guys
> can overwrite the store.log because now the size of this log is
> 170Mb ,with an another store.loc empty ???
Yes, and you can even disable the writing of store.log from
squid.conf.
store.log is generally not useful.
Regards
He
Ok
Therefore make a new file TXt named store.log ??
Thakns
Andrea Soccal
IT Sistema Ufficio
[EMAIL PROTECTED]
-Messaggio originale-
Da: Henrik Nordstrom [mailto:[EMAIL PROTECTED]
Inviato: martedì 9 settembre 2003 11.37
A: Soccal Andrea; '[EMAIL PROTECTED]'
Oggetto: Re: [squid-users] Ca
Hi All,
I am using squid-2.5.STABLE1
> for redirection in my setup.The redirect program is
writing the
> redirect_url , src address , identity and method to
the stdout ,
> but the redirection is not happening.I have tried
with (printf,
> fflush )combination , (sprintf , fprintf , fflush
)combo
How can i install additional features as "ping" after installing samba 3.0rc2 with
rpms??
mfg
Hi all!
How can i install additional features as "ping" after installing squid 2.5stable3 with
rpms??
mfg
sorry for my mistake (samba)
I have my isp blocking hundreds if not thousnads of sites and
sending a copy of the internet explorer 404 not found page
instead of the original site or any other page saying that the
site was blocked.
Now, I want to know if using a cache peer located outside the
tunisian backbone as parent will a
Hi everyone,
i have SquidNT running with NTLM authentication. Everything is running
fine after the tips from Guido (thanks again).
Now i configured the proxy to use a parent proxy, and prefere that parent
over direct connections.
After i did that NTLM broke.
If the parent proxy is dead, then eve
> I have my isp blocking hundreds if not thousnads of sites
> Now, I want to know if using a cache peer located outside the
> tunisian backbone as parent will allow me to access such sites
Yes, provided that:
1) Your ISP allows the peering traffic
2) You follow the Squid FAQ instructions to forw
All,
I have WCCP modules already but plan to change my Ethernet card.
I assume that the WCCP modules still usable as long as I do not change the
kernel, am I right?
Please advise. Your answer is very appreciated.
Thx & Rgds,
Awie
fre 2003-08-29 klockan 00.51 skrev [EMAIL PROTECTED]:
> Thank you for this information.
> Please could you tell me how to force use of client certificates ?
> I want squid to reject connections without client certificates
> authenticated by my CA certificate.
If the request is still accepted by S
tis 2003-09-09 klockan 15.47 skrev [EMAIL PROTECTED]:
> Hi all!
>
> How can i install additional features as "ping" after installing squid 2.5stable3
> with rpms??
> mfg
> sorry for my mistake (samba)
Depends.. to have support for ICMP your Squid binary must be configured
with ICMP support
tis 2003-09-09 klockan 16.11 skrev Daniel Meyer:
> If the parent proxy is dead, then everything works fine. The users are
> authenticated by their InternetExplorer, no questions, usernames or
> passwords asked.
>
> If the parent proxy is alive, then NTLM breaks. Squid asks for a username
> and pa
tis 2003-09-09 klockan 17.10 skrev Awie:
> All,
>
> I have WCCP modules already but plan to change my Ethernet card.
>
> I assume that the WCCP modules still usable as long as I do not change the
> kernel, am I right?
Right.
Regards
Henrik
--
Donations welcome if you consider my Free Squid su
On 9 Sep 2003, Henrik Nordstrom wrote:
> tis 2003-09-09 klockan 16.11 skrev Daniel Meyer:
>
> > If the parent proxy is dead, then everything works fine. The users are
> > authenticated by their InternetExplorer, no questions, usernames or
> > passwords asked.
> >
> > If the parent proxy is alive,
Hi Daniel,
At 16.11 09/09/2003, Daniel Meyer wrote:
Hi everyone,
i have SquidNT running with NTLM authentication. Everything is running
fine after the tips from Guido (thanks again).
Now i configured the proxy to use a parent proxy, and prefere that parent
over direct connections.
After i did th
Hello,
I need of the a documentation to configure the squid proxy with ntlm
authentication and that explains the compilation options
Where do I find ?
thanks
Luciano
Greetings,
How do I determine the optimum number of redirector processes to use?
The FAQ says:
Caution
If you start too few Squid will have to wait for them to process a back log of URLs,
slowing it down. If you start too many they will use RAM and other system resources.
So what is too few or
On Tuesday 09 September 2003 22.54, Rangel, Luciano wrote:
> Hello,
>
> I need of the a documentation to configure the squid proxy with
> ntlm authentication and that explains the compilation options
See the Squid FAQ section on winbind authentication.
Regards
Henrik
--
Donations welcome
Hi,
I am setting up a couple of squid servers for our uni using Red hat 8.0 with Kernel
2.4.21. I have set up 6 *36 GB disk for cache which mount as /cache1 to /cache6.
Currently I formatted the disk with ext3 file system.
cache_dir aufs /cache1 25000 64 256
to
cache_dir aufs /cac
[EMAIL PROTECTED] a écrit :
Hi there
I've got the latest stable version of Squid running on a RH9.0 machine and I've run into a little problem. From time to time the proxy server doesn't work the way it should, sometimes it totally stops working at all so I have to use another proxy server. Other
On Wednesday 10 September 2003 00.42, Kent, Mr. John wrote:
> So what is too few or too many? Is it just trial and error?
The optimal number depends on the type of redirector used and the
request load. If your redirector is only using CPU time then not very
many is needed, but if the redirecto
On Wednesday 10 September 2003 01.13, Mathew Thomas wrote:
> I am just confused of the best file system for squid after doing
> some 'googling' . Which file systems( ext2, ext3, reiserfs, ) is
> best for the squid cache? Do I need to use any option ( eg
> noatime,etc) in mounting the cache d
Well.
I would be much more interested in the first config.
I've tried the following squid.conf successfully :
---
https_port 1443 defaultsite=192.168.x.x:80 protocol=http cert=rproxy.cert
https_port 2443 defaultsite=192.168.x.x:81 protocol=http cert=rproxy.cert
cache_peer 192.168.x.x parent
On Wednesday 10 September 2003 02.04, [EMAIL PROTECTED] wrote:
> In my case, I use special ports (https://virt_serv_name:2443 and
> http://virt_serv_name:81...) and it looks like the vhost
> instruction in https_port doesn't work with it.
See your access.log. access.log contains the URL as proces
I've seen access.log.
When I add vhost in https_port settings, it looks like the virtual site
name is fully rewritten by squid in the http header.
Only the protocol type is changed from https:// to http:// .
So, it doesn't use the port specified in cache_peer...
cache_peer 192.168.x.x parent
Hello all
One thing that I've observed is that - AFAIK - there's no way for
full-on content filtering to be performed by SQUID.
The way the redirector works would require a double-fetch of the content
from a URL:
- Squid passes the URL to the redirector, which then examines the URL
(and possibl
Hi Guido,
> Please, do You can post your squid configuration ?
>
> I like to try it on a not Windows machine to see what happens and after
> compare with a Windows environment.
Here we go. Should be all the non-default lines from squid.conf:
http_port 8080
cache_peer 127.0.0.1 parent 8000 0 no-
hello, list.
is there any workaround patch for squid 2.5.STABLE3 to let mozilla work with auth
scheme digest in squid?
up to 1.5beta1 mozilla annoys user with username/password window every time new
nonce is sent to client.
here is my auth_param config for digest auth:
-
aut
33 matches
Mail list logo
