hi dan
try http://tweegy.demon.nl/projects/netstat-nat/
ciao
charles
On Mon, 2003-12-29 at 17:14, Dan Pinheiro (CPD) wrote:
> Hi All, sorry for the off message, but maybe someone can help me.
> I´d like to see the NAT mappings, including what connection the
> respective mapping is a
Hi ALL
I have defined the "accelHost" & "accelPort" then I added the following to
the conf file
http_access allow accelHost accelPort
http_access deny all
Is there anything else I need to get this one working? Currently, this is
not working and I even see the internal IP of the "accelhost" app
http://www.univ.kiev.ua/~roman/wccpv2
It is a mini howto.
> You are welcome to.
>
> Regards
> Henrik
>
> On Mon, 29 Dec 2003, Roman Synyuk wrote:
>
> > Hello Henrik.
> >
> > I have made some modification to existing wccpv2 patch, for authentication
> > and non-standard ports (up to 8 ports)
> Is there anything else I need to get this one working? Currently, this is
> not working and I even see the internal IP of the "accelhost" appear on the
> lower left of the browser when trying to load the page!!
>
Well for Reverse proxy,
If a real web server is away from the Squid-proxy means u
Hi there. Can squid be configured to fetch remote resource at a speed
not higher than the speed at which squid's client consumes the stream?
I'm trying to use a traffic shaper (http://www.stewart.com.au/ip_relay/)
to cut down on bandwidth usage, but this only limits traffic between
ip_relay and
> Hi there. Can squid be configured to fetch remote resource at a speed
> not higher than the speed at which squid's client consumes the stream?
Well.
Why cannot you use Delay Pools for limiting Bandwidth,
Using the Delay Pools you can limit the Bandwidth depening upon the allowed limit to
a
I have set these except I was taking the default for these lines
#httpd_accel_with_proxy off
#httpd_accel_uses_host_header off
would these cause any problem and do I need to add any http_access statement
at all?
Thanks
/dl
- Original Message -
From: "Muthukumar" <[EMAIL PROTECTED]>
To: "
Dec 30 06:47:45 2003.
*** You have been signed on at Tue Dec 30 06:47:54 2003.
*** You have been disconnected. Tue Dec 30 07:02:51 2003.
*** You have been signed on at Tue Dec 30 07:01:01 2003
Squid Cache: Version 3.0-PRE3-20031230
configure options: '--disable-ident-lookups' '--
you can create a rules
example:
acl ssl port 443 563 # SSL
regards
Gerald
-Message d'origine-
De : Rafael Caceres [mailto:[EMAIL PROTECTED]
Envoyé : lundi 29 décembre 2003 14:34
À : [EMAIL PROTECTED]
Objet : Problem setting up accelerated proxy for multiple servers with
HTTP
In a message dated 12/30/03 6:55:52 AM Eastern Standard Time, [EMAIL PROTECTED]
writes:
> Hi there. Can squid be configured to fetch remote resource at a speed
> not higher than the speed at which squid's client consumes the stream?
> I'm trying to use a traffic shaper (http://www.stewart.com
Some of you may remeber that I had problems accesing a certain site with
SquidNT.
Now I have the same with "http://www.hotmail.be"; :-(
Don't have it on the Unix version..
Anybody can confirm this is a problem with SquidNT ?
Version : SquidNT (squid/2.5.STABLE4-NT-CVS
Hi Stefaan,
At 17.15 30/12/2003, Stefaan Van Dooren wrote:
Some of you may remeber that I had problems accesing a certain site with
SquidNT.
Now I have the same with "http://www.hotmail.be"; :-(
Don't have it on the Unix version..
Anybody can confirm this is a problem with SquidNT ?
Version
Henrik:
On Tue, 2003-12-30 at 07:11, Henrik Nordstrom wrote:
> On 29 Dec 2003, Rafael Caceres wrote:
>
> > "Failed to aquire SSL certificate: error: 0200100E:system library:fopen:
> > Bad address"
>
> This is doe to an incorrect https_port specification.
I used the following in /etc/squid.conf:
> I have set these except I was taking the default for these lines
> #httpd_accel_with_proxy off
> #httpd_accel_uses_host_header off
If u use the squid proxy and as well as the web-server in the same machine means ,
httpd_accel_with_proxy on
If one wants to use Squid as both an httpd accelerator
We are trying to ftp to a site with the following format
ftp://[EMAIL PROTECTED]
Although the error we are getting is "cache access denied" we can access
sites on that machine but we get the error cache access denied when trying
to ftp to site with the above method.
Below is the error message:
_
squid-2.5.STABLE4 works just fine.
Thanks,
Lloyd Parkes
Wellington Unix Team
EDS (New Zealand) Limited
Phone +64 4 474 5732
Fax +64 4 474 5094
> -Original Message-
> From: Henrik Nordstrom [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, 30 December 2003 4:35 p.m.
> To: Parkes, Lloyd
> Cc: '[
i can make the module for redhat 9 just fine... but it goes crazy with
as 3
If anyone can point in a direction (other than google.. been doing that
for two days) id be thankfull
happy new years
gcc -D__KERNEL__ -I/usr/src/linux-2.4.21-4.0.1.EL/include -Wall
-Wstrict-prototypes -Wno-trigraphs -O2
When going to site www.checksunlimited.com and try to add something to my
shopping cart I get an error, 104 Connection Reset by peer. When I bypass
the DST-NAT rule the page loads again. This is on a Mikrotik Linux router
running 2.5STABLE4 squid.
Is this just the way things are when running Squ
On 30 Dec 2003, Rafael Caceres wrote:
> https_port 443
Please see the documentation for https_port. A SSL server MUST have a
certificate (and key)
Regards
Henrik
On Tue, 30 Dec 2003, DLau wrote:
> http_access allow accelHost accelPort
> http_access deny all
>
> Is there anything else I need to get this one working? Currently, this is
> not working and I even see the internal IP of the "accelhost" appear on the
> lower left of the browser when trying to l
On Tue, 30 Dec 2003, rihad wrote:
> Hi there. Can squid be configured to fetch remote resource at a speed
> not higher than the speed at which squid's client consumes the stream?
This is the default, except that some data is buffered both by Squid and
in the TCP receive/transmit buffers.
Tota
On Tue, 30 Dec 2003, Stefaan Van Dooren wrote:
> Some of you may remeber that I had problems accesing a certain site with
> SquidNT.
Yes, and that problem has been identified to SquidNT being built with
--enable-icmp and this most likely triggering an IDS (Intrusion Detection
System) at the sit
On Tue, 30 Dec 2003 Jim_Brouse/[EMAIL PROTECTED] wrote:
> We are trying to ftp to a site with the following format
> ftp://[EMAIL PROTECTED]
Ok.
> Although the error we are getting is "cache access denied" we can access
> sites on that machine but we get the error cache access denied when trying
On Tue, 30 Dec 2003, Tom Greaser wrote:
> i can make the module for redhat 9 just fine... but it goes crazy with
> as 3
> If anyone can point in a direction (other than google.. been doing that
> for two days) id be thankfull
> ip_wccp.c: In function `ip_wccp_init':
> ip_wccp.c:118: too few argu
Hello,
(I am cross posting this to both the Squid and Samba-Tech list as it
relates to the integration of both- sorry! )
Here is the setup:
-1 W2K PDC and 2 W2K BDCs- no active directory
-lots of Windows clients: XP and W2K Cytrix
-Using Squid 2.5Stable4 and Kerberos 1.3.1 on RH9
We are using S
I'm using Fedora Core 1, with Squid 2.5-STABLE3 (which it comes with).
I got basic and ntlm (via samba 3) auth working with squid, but it doesn't
recognize digest authentication. I tried downloading the source for STABLE4,
recompiling with the same configure flags plus digest in enable-auth, and
p
So is there any parameter to "convince your server to NOT redirect the user
away"?
Up to this point I was only testing with IP, i.e. a true IP to the squid
(DMZ) which is then supposed to accelerate / reverse proxying to a web
server with an internal IP (Internal).
Thanks
/dl
- Original Messa
27 matches
Mail list logo