From all these docs, it seems as if delay pools is by default DISABLED
on the squid that gets installed on the system (Red Hat 7.3
squid-2.4.STABLE6).
Is this assumption correct? or how can I check whether delay pools is
enabled or disabled?
Yes. To check that go to the squid binary
I am very new to squid ! And while yes I have been able to setup a squid proxy
server, it has been fine up until now. Let me basically explain my setup
quickly.
Squid Proxy Server(10.240.1.242:8000)
Wireless 2mb connection.
The users will basically authenticate against the squid proxy server
Hi,
Kindly clarify this doubt for me :-
Is the time difference between the two times
entered in the access.log file the actual or
approximate time taken by squid to process that
request. If no, then how can I compute the time taken
by squid to process a request once it has received the
Bonamici, Andrea wrote:
Hi All.
It's possible ( using squid 2.5 stable 5 ) to log that the user upload
or download ??
For example:
The user visit the www.hotmail.com and create a new message with an
attachment.
I would like that the name of the attachment is write into log file.
Someone have an
While trying to retrieve the URL: http://www.genetech.co.za/
The following error was encountered:
* Connection Failed
The system returned:
(111) Connection refused
The remote host or network may be down. Please try the request again.
Your cache administrator is [EMAIL PROTECTED]
Hello,
I'm a newbie in linux and squid things
On my college we have primary proxy which connected to internet, and i use
those primary proxy as my cache parent. My system running Debian with
kernel 2.6.6 and squid 2.4 STABLE 6.I've just upgrading it from the STABLE
4 version. After that i get
- Original Message -
From: Muthukumar [EMAIL PROTECTED]
To: Alex [EMAIL PROTECTED]
Sent: Friday, June 11, 2004 6:37 AM
Subject: Re: [squid-users] various problems
ACL's are setup like this:
acl files url_regex -i /etc/squid/files
acl clienti-32k src
I recently had a user complain that when they would type a search term (like dell
instead of www.dell.com) in their address bar that
squid would return an error page stating that it was an invalid URL instead of IE
going to the MSN search page. Upon further
investigation I found that IE will
I have recently installed squid as a transparent proxy. I see every http request
that goes
through squid but it doesn't cache anything. Well, all I see in the access.log is
TCP_MISS/200. Any suggestions??
Are using the transparent squid (httpd_accel_host virtual httpd_accel_port 80 ) with
I recently encountered a memory issue with squid. When I ran top I noticed
the free memory was decreasing drastically. Once it got to 5029 squid
stopped for 2 minutes. The free memory increased back to 918316 and the
following message showed up in cache.log:
FATAL: xmalloc: Unable to allocate
Bonamici, Andrea wrote:
Bonamici, Andrea wrote:
Hi All.
It's possible ( using squid 2.5 stable 5 ) to log that the user upload
or download ??
For example:
The user visit the www.hotmail.com and create a new message with an
attachment.
I would like that the name of the attachment is write into
Hi all,
I have Squid3 as ssl front-end for OWA 2000.
I can authenticate with the exchange server then my browser says I have
mixed secure/nonsecure information.
I view source and see that the exchange framed page is writing HTTP URLs
and I have front-end-https=on in the cach_peer tag.
So I
On Fri, Jun 11, 2004 at 08:36:46AM -0500, McDermott, AS Amanda (5841) @ IS wrote:
I recently encountered a memory issue with squid. When I ran top I noticed
the free memory was decreasing drastically. Once it got to 5029 squid
stopped for 2 minutes. The free memory increased back to 918316 and
Hi:
Ive been installed Squid Proxy-2.4.STABLE-4 in Red Hat 8.0 from a rpm
package.
Now I want to use Delay pools, but I read in squid.conf if I use delays pool
I must recompile squid with --enable delay-pools.
How can I do it from an RPM? or when I install from a rpm package squid
compile
Thanx Muthukumar for your reply, BUT
I have already added the lines you mentioned.
http_access allow all
icp_access allow all
httpd_accel_host virtual
httpd_accel_port 80
httpd_accel_with_proxy on
httpd_accel_uses_host_header on
Could there be some other reason? Absolutely
Hi,
I would like to know what are the unnecessary files that come with squid. My idea is
to
install the barest minimum needed for squid to work as a transparent proxy. I know
there
is the man page. Anything else?
Any suggestion would be helpful.
Thanx
Dravya
How do I monitor to see if the machine is out of swap? Squid FAQ 8.7 says to
use pstat but that is not a recognizable command.
-Original Message-
From: Artem Stepanoff [mailto:[EMAIL PROTECTED]
Sent: Friday, June 11, 2004 9:07 AM
To: McDermott, AS Amanda (5841) @ IS
Cc: [EMAIL
On Fri, Jun 11, 2004 at 09:54:41AM -0500, McDermott, AS Amanda (5841) @ IS wrote:
How do I monitor to see if the machine is out of swap? Squid FAQ 8.7 says to
use pstat but that is not a recognizable command.
I think that simple unix commands such as 'top' can show this.
But the system is
What is the best way at handling this. I researched this and evidentally
this is a common issue and there are different ways of fixing it. What do
you suggest I do?
-Original Message-
From: Artem Stepanoff [mailto:[EMAIL PROTECTED]
Sent: Friday, June 11, 2004 10:00 AM
To: McDermott, AS
Hi,
Thanks for your reply. winbind seems to be fine and I can browse the net
from the Squid box.
[EMAIL PROTECTED] root]# wbinfo -t
checking the trust secret via RPC calls succeeded
[EMAIL PROTECTED] root]# wbinfo -a nzhang%testing123
plaintext password authentication succeeded
hi all..
just about to start compiling squid 2.5-STABLE5 on
kernel 2.6.4...
anyone experienced squid on kernel 2.6, especially wrt
to wccp..?..
thx..
mark
___ALL-NEW Yahoo! Messenger -
so many
Hi,
Squid be default connect to web server on port 80.
How can I change outgoing port?
Regards,
nooshin
Hi,
I am a total squid neewbie.
I was wondering, DNS uses port 53 right? So how does squid do DNS lookups? If I set my
browser settings manually, and type a non-existing url. I get a message from squid
saying
it couldn't do a look up. However, when I make squid transparent. I don't see the
McDermott, AS Amanda (5841) @ IS wrote:
What is the best way at handling this. I researched this and evidentally
this is a common issue and there are different ways of fixing it. What do
you suggest I do?
Make Squid use less memory. Reduce the cache_mem setting and/or reduce the
amount of
Alex wrote:
Maybe you have an example of how things should be setup? To my knoledge
this is the right way... but I may be wrong
What I want is to shape download for the files with extensions specified
in /etc/squid/files to 32k for users in acl clienti-32k and to 64k to
users in acl
Deepa D wrote:
Is the time difference between the two times
entered in the access.log file the actual or
approximate time taken by squid to process that
request.
According the access.log section of the FAQ:
http://www.squid-cache.org/Doc/FAQ/FAQ-6.html#ss6.6
The second column in the
victor wrote:
From the article it sgugest disableing the feature will plug the hole,
I think the NTLM handler is not enabled by default correct? If I didn't
complie with NTLM handler enabled, does it mean I'm safe?
Even if NTLM support is enabled, if you are not using NTLM auth in your
Zand, Nooshin wrote:
Squid be default connect to web server on port 80.
How can I change outgoing port?
Enter the request into the client as http://www.domain.com:port/; instead
of http://www.domain.com;.
Adam
Adam Aube wrote:
Norman Zhang wrote:
I'm running Squid-2.5.STABLE4-1.100mdk with samba-server-3.0.2a-3mdk.
When I tried to go the internet, I see the following in /var/log/syslog
Jun 9 17:06:07 proxy (squid): authenticateNTLMHandleReply: called with
no result string
Jun 9 17:06:07 proxy
Abude,
I am looking on how to handle it within squid without asking client to
enter prot nubmer in URL.
Thanks,
nooshin
-Original Message-
From: news [mailto:[EMAIL PROTECTED] On Behalf Of Adam Aube
Sent: Friday, June 11, 2004 1:32 PM
To: [EMAIL PROTECTED]
Subject: [squid-users] Re:
dravya wrote:
I was wondering, DNS uses port 53 right? So how does squid do DNS lookups?
By making a request to UDP port 53 of a domain server.
If I set my browser settings manually, and type a non-existing url. I get
a message from squid saying it couldn't do a look up. However, when I make
Norman Zhang wrote:
Adam Aube wrote:
Those are the NTLM and group helpers you use with Samba 2.2.x. For Samba
3 you need to use Samba's built-in ntlm_auth helper for basic/NTLM auth
and the wbinfo_group group helper (which comes with Squid).
Thanks. I have switched to /usr/lib/ntlm_auth,
Zand, Nooshin wrote:
I am looking on how to handle it within squid without asking client to
enter prot nubmer in URL.
May I ask why you want to change the default, sane, and standards-complaint
behavior of Squid?
If you really want to do it, use a redirector.
It's possible ( using squid 2.5 stable 5 ) to log that the user upload
or download ??
We can use the req_mime_type acl amd rep_mime_type to detect the upload or download of
files.
The user visit the www.hotmail.com and create a new message with an
attachment.
I would like that the name of
I set up SQUID to forward all HTTP traffic through a parent proxy
(bound to internet) except when URL matches certain suffix domains (intranet).
Upon receiving internet URL like www.thepurists.com, SQUID however
queries DNS servers for www.squid-cache.org, www.squid-cache.org.sub.my.org, ...
Muthukumar,
Try running the pages you wish to see cached/HIT through
the cacheability tool. I found my HITs went way up when I
fixed problems with the pages and scripts found by this tool.
http://www.web-caching.com/cacheability.html
John Kent
Webmaster
Naval Research Laboratory
Monterey, CA
Adam Aube wrote:
Norman Zhang wrote:
Those are the NTLM and group helpers you use with Samba 2.2.x. For Samba
3 you need to use Samba's built-in ntlm_auth helper for basic/NTLM auth
and the wbinfo_group group helper (which comes with Squid).
Thanks. I have switched to /usr/lib/ntlm_auth, but I
Norman Zhang wrote:
I copied wbinfo_group into /usr/lib/squid/ and restarted Squid, but
still no luck, now /var/log/syslog looks like follows.
Jun 11 15:32:09 proxy squid[8502]: Squid Parent: child process 8532
started Jun 11 15:32:12 proxy (squid): authenticateNTLMHandleReply: called
with
Adam Aube wrote:
Norman Zhang wrote:
I copied wbinfo_group into /usr/lib/squid/ and restarted Squid, but
still no luck, now /var/log/syslog looks like follows.
Jun 11 15:32:09 proxy squid[8502]: Squid Parent: child process 8532
started Jun 11 15:32:12 proxy (squid): authenticateNTLMHandleReply:
Norman Zhang wrote:
Thank you so much.
You're welcome.
but /var/log/squid/cache.log complains
[2004/06/11 18:03:23, 0] utils/ntlm_auth.c:winbind_pw_check(349)
Login for user [EMAIL PROTECTED] failed due to [winbind
client not authorized to use winbindd_pam_auth_crap. Ensure permissions
40 matches
Mail list logo