I am attempting to compile SQUID2-5 Stable 6 with
SunOne LDAP authentication support. Below are some
details
o/s - Solaris 9 sparc
ldap include/libs - SunOne DS 5.2
configure command - ./configure
--enable-basic-auth-helpers=LDAP
compiler - GCC 3.0.2 + GNU make and binutils
I type "make all" and
> Hi,
>
> Running on Celeron 600MHz 10Gb 256Mb.
> ...wondering why I've got :
> - MISSES quite high
Depends on your users web 'profile' and
access habbits.
> - Page faults with physical i/o: 6
Peanuts,don't worry.
> - Memory accounted for:Total accounted: -1 KB
>
Ugrade to the l
Hi,
Running on Celeron 600MHz 10Gb 256Mb.
...wondering why I've got :
- MISSES quite high
- Page faults with physical i/o: 6
- Memory accounted for:Total accounted: -1 KB
Is it strange or normal?
Any comments welcome!
-Hendro-
Squid Object Cache: Version 2.5.STABLE1
Start Time:
Hi There,
I have recently installed Exchange 2003 with Squid 3 PRE3 as the front
end... All appears to be working fine except I have just become aware that
it sometimes corrupts attached MS Word documents. It is not constant. It
does it about 30% of the time...
Anyone got any ideas? I have not be
Hello,
It appears that web servers also open and close the socket while
servicing GETs. I watched snort dumps of different traffic sessions
between squid and other web servers, and they all opened and closed the
interface during their particular session with squid.
So, it seems like my work-arou
Hello,
I made a work-around for my problem! Now I create a new socket
instantiation before pushing each file to squid and close the socket
after I receive an 'HTTP/1.0 200 OK' response.
I realize that this is not the most efficient way to communicate through
a socket, but it allows me to continu
Hi Folks,
We've a little ACL problem here:
Let me explain the situation:
There are 2 networks, one for Admin, one for Educative. On the Admin
lan, we want to use Ident. On the Edu lan, we want to use ident, except
for 3 citrix servers, these should use NTLM.
This implemented in squid becames:
au
I would like to shed some additional light that I recently uncovered.
According to this site
(http://msmvps.com/bradley/archive/2004/09/04/13009.aspx), the problem
is v5 of the Windows Update site and NTLM authenication for which I am
using. This particular article is addressing ISA Server and how
I know this topic has been asked many many times but I have not found
a solution that works so I figured I would give it one last kick.
Version 2.5.STABLE5
You will notice I have tried a few things and left some of them
commented in my squid.conf which is:
acl all src 0.0.0.0/0.0.0.0
#acl micros
Hello,
Henrik Nordstrom wrote:
>
> On Tue, 5 Oct 2004, OTR Comm wrote:
>
> > Like I said, during a multiple file push session, the first entry shows
> > up in cache.log and gets cached, but the other entries do not show up in
> > cache.log, and do not get cached. But all the entries show up in
Well, it seems that I'll have to try to get that patch working. I need
a ServerIron that supports code 8.x and up. The Foundry doesn't support
'HTTP header insertion' on the ServerIron XL, which is what I have.
http://www.foundrynet.com/services/documentation/siug/ServerIron_url_swi
tching.html#6
I've set up a pair of reverse proxies for the purpose of reducing the
load on some web hosts. I've used a redirector to rewrite
www.domain.com to direct.www.domain.com with the "direct.www" and
"www" versions of the site name appropriately defined in the DNS so as
to send "www" to one of the proxi
dot wrote:
Hi,
sorry for misunderstanding, but isn't the communication as follows:
the client ask the balancer, the balancer balances on few squids, squid
is asking the destination ??
If so, and you want to see client IP on squidy, the balancer should
insert the xff-header and squid handle it.
No, the server IP
acl correct...
Saludos.
--
Manuel Canseco García
Mp Sistemas
Av. Leonardo Da Vinci TA-13
41092 Sevilla
http://www.mpsistemas.es
Ext- 8124
--
>>> Adam Aube <[
MANUEL CANSECO GARCIA wrote:
> TCP denied messange in access.log after ip change...any ideas?
The client's IP, right?
Check your acls to see if there are any IP-based access controls, and update
them accordingly.
Adam
Hi,
sorry for misunderstanding, but isn't the communication as follows:
the client ask the balancer, the balancer balances on few squids, squid
is asking the destination ??
If so, and you want to see client IP on squidy, the balancer should
insert the xff-header and squid handle it.
Is the balan
Hmm... Looking at this page, I might need to patch squid. I'm running
2.5.STABLE5-4
http://devel.squid-cache.org/follow_xff/
-Original Message-
From: Harding, Devon [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 06, 2004 11:39 AM
To: [EMAIL PROTECTED]
Subject: RE: [squid-users] Cli
When I enable it, its still shows the IP of the Foundry, instead of the
Client IP.
-Original Message-
From: Harding, Devon [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 06, 2004 11:20 AM
To: [EMAIL PROTECTED]
Subject: RE: [squid-users] Client IP & Load Balancer
Is it on or off by de
Is it on or off by default?
-Original Message-
From: Christoph Haas [mailto:[EMAIL PROTECTED]
Sent: Wednesday, October 06, 2004 11:13 AM
To: [EMAIL PROTECTED]
Subject: Re: [squid-users] Client IP & Load Balancer
On Wed, Oct 06, 2004 at 10:49:07AM -0400, Harding, Devon wrote:
> I'm using
Hi,
TCP denied messange in access.log after ip change...any ideas?
Ahora en españó
despues de cambiar la IP no puedo conectar con el proxy, en access.log veo TCP
denied...me doy cuenta de que si la maquina no tiene puesta la ip con la que se
instalo-configuró squid no funciona...para util
On Wed, Oct 06, 2004 at 10:49:07AM -0400, Harding, Devon wrote:
> I'm using httpd_accel and a Foundry ServerIron load balancer. How can I
> get squid to log clients real IPs instead of the IP of the load
> balancer? I read something that it has to do with X-Forwarded-For.
Yep, that's right. Look
Harding, Devon wrote:
I'm using httpd_accel and a Foundry ServerIron load balancer. How can I
get squid to log clients real IPs instead of the IP of the load
balancer?
mmmh, I`ve in this same situation but in the squid logs I get the real
IPs, only that
the clients connect to IP of the load ba
I am newbie in the caching arena.
O/S: Linux Suse 9
Architecture: Dual Intel Zeon 2.8
Physical Memory (RAM): 8G
Hard Drive Space: 72G
Squid Version: 2.5.STABLE6
I have a few questions concerning squid and RAM memory configuration.
Here are is my memory usage when I fire up squid.
2004/10/05 20
I'm using httpd_accel and a Foundry ServerIron load balancer. How can I
get squid to log clients real IPs instead of the IP of the load
balancer? I read something that it has to do with X-Forwarded-For.
Devon Harding
Windows Systems Engineer
Southern Wine & Spirits - GSD
954-602-2469
-
> On Wed, 6 Oct 2004, [ISO-8859-1] "Stephan Müller" wrote:
>
> > I've a problem to cache files from a ftp-server. We get get them over
> HTTP
> > (GET ftp://192.168.../FILE.OCX).
> > Squid cache them, if they are fresh. After the file get stale, he take
> the
> > file again from the ftp-server. A
Lars,
Ensure the permissions on /var/cache/samba/winbindd_privileged are set as
chown root:squid and chmod 750. This works for me, and I've been able to
upgrade to Samba 3.0.7 without changing these permissions, or changing the
user I run Samba under.
John
-Original Message-
From: Lars R
Hi all
I just tried updating our samba server to 3.0.7 (from an ealier 3.x
release). Now winbind auth does not work any more, I get the folowing
error in smbd.log.
--
[2004/10/06 13:16:18, 2] nsswitch/
Hello all,
I run a squid caching server to provide service to public network of about
50 Cyber café systems. My cache is on an AMD Athlon 2.0Ghz, with 512MB of
RAM running on a Red hat 9.0 box.
I have squid configured as a transparent proxy, to avoid users changing
proxy settings.
I have a proble
Henrik Nordstrom wrote:
Please look up the proxy-only flag in the squid.conf.default
documentation and you will understand what is going on here.
Man! I guess you got it (actually you *got* it!).
So I just have to remove that option and restart squid, right?
(BTW: I still got three times the same
On Wed, 6 Oct 2004, Lars Roland wrote:
Is it possible create a log continging the username along with the
website that a user is wisiting. As the config is now, my acces.log
only shows the website and the ip address. I would like to have it (or
possibly another log file) showning both the username
On Wed, 6 Oct 2004, [ISO-8859-1] "Stephan Müller" wrote:
I've a problem to cache files from a ftp-server. We get get them over HTTP
(GET ftp://192.168.../FILE.OCX).
Squid cache them, if they are fresh. After the file get stale, he take the
file again from the ftp-server. Also the file is not modifi
On Wed, 6 Oct 2004, Rolf wrote:
Oh thank you. very fine indeed.
To refine the question a little, this means that the destination is only
aware of the remapped address, that the illusion is complete?
Depends on what you do with the X-Forwarded-For header.
Presumably for the tcp conversation to work
On Wed, 6 Oct 2004, Boniforti Flavio wrote:
cache_peer proxy.reteunitaria.piemonte.it parent 3128 3130 proxy-only
Please look up the proxy-only flag in the squid.conf.default
documentation and you will understand what is going on here.
Regards
Henrik
Hello there!
We're using the latest stable version of Squid here in our office
(2.5.STABLE6) as our main proxy server. Recently a strange problem has come
to my attention, and I can't find any other mention of it in the mailing
lists.
A couple of users have complained that after a short while of
>
>
> >
> > Hello!
> >
> > I've a problem to cache files from a ftp-server. We get get
> > them over HTTP
> > (GET ftp://192.168.../FILE.OCX).
> > Squid cache them, if they are fresh. After the file get
> > stale, he take the
> > file again from the ftp-server. Also the file is not
> > mo
Hi All
Is it possible create a log continging the username along with the
website that a user is wisiting. As the config is now, my acces.log
only shows the website and the ip address. I would like to have it (or
possibly another log file) showning both the username that squid get
from samba and t
I resolved my problem excluding authentication to windowsupdate sites. This
is my access-list:
acl microsoft1 url_regex -i c.microsoft.com
acl microsoft2 url_regex -i download.microsoft.com
acl microsoft3 url_regex -i download.windowsupdate.com
acl microsoft4 url_regex -i v4.windowsupdate.microsof
Hello All,
I did a setup as,
client browser ---> NCSA authentication > DANSguardian 8080 ---> Squid
---> Real web world
so that my web requests are resolved.
I had a problem when testing exceptionuserlist and filtergroups on dansguardian
there. I tried as,
---
>
> Hello!
>
> I've a problem to cache files from a ftp-server. We get get
> them over HTTP
> (GET ftp://192.168.../FILE.OCX).
> Squid cache them, if they are fresh. After the file get
> stale, he take the
> file again from the ftp-server. Also the file is not
> modified. He doesn't
> check
Hello!
I've a problem to cache files from a ftp-server. We get get them over HTTP
(GET ftp://192.168.../FILE.OCX).
Squid cache them, if they are fresh. After the file get stale, he take the
file again from the ftp-server. Also the file is not modified. He doesn't
check the file on the ftp-server w
40 matches
Mail list logo