I had the same problem.
It seems that every time there is a new vertion of MSN Messanger available you
are not able to loggin.
Stange :(
I upgraded to version 6.2 and it works fine now.
Check this first probabily it will work for you too.
Regards,
Klodi
- Original Message -
From: Henrik
Hi Henrik
Henrik Nordstrom wrote:
On Thu, 10 Feb 2005, Tobias Reckhard wrote:
[snip]
i.e. a client talks HTTP to Squid, it encrypts the communication using
SSL, authenticates to the remote HTTPS server using a client
certificate (and key), communicating with the remote HTTPS server
across
On Fri, 11 Feb 2005, Tobias Reckhard wrote:
I'm not sure I fully understand, is the following right?
1. Client connects to Squid v3 and requests http://somesite, thinking it's
the origin server.
or https://somesite, doesn't matter.
if using http Squid v3 can even be contacted as a proxy.
If using
I had the same problem.
It seems that every time there is a new vertion
of MSN Messanger available you
are not able to loggin.
Stange :(
I upgraded to version 6.2 and it works fine
now.
Check this first probabily it will work for you
too.
Regards,
Klodi
Hi Klodi,
I had a suggestion
This means that MSN has firewalled the port,
not allowing you to connect
to it.
Regards
Henrik
Hi Henrik,
Dont't know how, but it seems like things got back to
normal operability... although i don't why did MSN got
that port firewalled.
Anyway... i am glad everything is ok since people
Henrik Nordstrom wrote:
On Fri, 11 Feb 2005, Tobias Reckhard wrote:
I'm not sure I fully understand, is the following right?
1. Client connects to Squid v3 and requests http://somesite, thinking
it's the origin server.
or https://somesite, doesn't matter.
Right, if I supply Squid with a
I downloaded chpasswd-cgi.tar.gz from squid.cache.org/htpasswd/
I was getting following error when running make for chpasswd.cgi
chpasswd.c:248: error: conflicting types for 'getword'
chpasswd.c:136: error: previous implicit declaration of 'getword' was here
chpasswd.c:266: error: conflicting
Dear Henrik,
Thanks. Your mail gave me a lots of views.
Some comments:
use wget -N to retreive files.
I thought that wget status message occupying window so
that I put -q (quit) mode there. But new version will
be with status (-N) support within two days with
additional updations.
Hi all,
Can a Squid make to do following?
Client -- HTTPS -- Squid --- HTTPS with client certificate --- HTTP
proxy HTTP Server
Is it possible? How I do this?
Regards,
Oliver
On Fri, 11 Feb 2005, thomas wrote:
I downloaded chpasswd-cgi.tar.gz from squid.cache.org/htpasswd/
I was getting following error when running make for chpasswd.cgi
chpasswd.c:248: error: conflicting types for 'getword'
chpasswd.c:136: error: previous implicit declaration of 'getword' was here
On Fri, 11 Feb 2005, squidrunner team wrote:
I thought that wget status message occupying window so
that I put -q (quit) mode there. But new version will
be with status (-N) support within two days with
additional updations.
-N is timestamping, allowing wget to skip downloading the file if it's
On Fri, 11 Feb 2005, Oliver Tacconi wrote:
Can a Squid make to do following?
Client -- HTTPS -- Squid --- HTTPS with client certificate --- HTTP proxy
HTTP Server
See other thread about this.
Is it possible? How I do this?
Possible yes, but not with Squid alone (yet).
Regards
Henrik
Add following to chpasswd.c just after #include statements.
All error will vanish, and compilation will succeeded.
void getword(char *word, char *line, char stop);
void Herror(char *msg, FILE * fpw, FILE * tmp);
void putline(FILE *,char *);
void Hmsg(char *msg);
void sendmail(char *user, char
This cannot be squid. Squid would have returned an error page. The problem
is elsewhere.
- Do you have a firewall in place which might be blocking
outgoing/incoming traffic on the secure port.
No firewall in between browsing machine and squid proxy. Squid proxy
parent is another
HELP!
I am an LDAP newbie so please be patient. I have searched the archives
but have not been able to really find answers. I am trying to
authenticate http users through Squid via LDAP. I am running RH
Enterprise and Squid-2.5.STABLE3-3.3E. I am able to run the ldapsearch
command:
ldapsearch
Hi all,
I applyed the Visolve patch for Squid2.5 ( to enable Wccpv2 on
Squid )
and now I'm trying to configure and compile Squid2.5 ... I'm trying because
I have a problem.
Here what I've done :
1) tar xvzf squid-2.5.STABLE5-icap-6-pre3.tar.gz ( these Squid sources
are patched with
Checked the duplex and both were auto. Set both to full and still have the same
problem. (HP server w/Intel NIC, Cisco switch).
Any one else have any ideas?
Adam
From: Henrik Nordstrom [EMAIL PROTECTED]
Date: 2005/02/10 Thu PM 07:17:31 EST
To: [EMAIL PROTECTED]
CC:
Try with this line
auth_param basic program /usr/lib/squid/squid_ldap_auth -u cn -b
ou=DEPARTMENT,o=COMPANY -h LDAPSERVER
post your results
Regards.
- Original Message -
From: Corey Tyndall [EMAIL PROTECTED]
To: squid-users@squid-cache.org
Sent: Friday, February 11, 2005 12:33 PM
[EMAIL PROTECTED] wrote:
Checked the duplex and both were auto. Set both to full and still have the same problem. (HP server w/Intel NIC, Cisco switch).
Actually, the new Cisco recommendation is to make sure that all devices
that can autonegotiate are setup to autonegatiate. Hard coding
Made these changes and recieved the same results.
Esteban Darreche [EMAIL PROTECTED] 02/11/05 12:06PM
Try with this line
auth_param basic program /usr/lib/squid/squid_ldap_auth -u cn -b
ou=DEPARTMENT,o=COMPANY -h LDAPSERVER
post your results
Regards.
- Original Message -
From: Corey
Hi Yall,
Can someone tell me who I can figure out if squid cache is corrupt?
We are having intermittent problems, where for example, if I type
www.google.com I end up with a page from a different site -- but
google.com is till in the URL Address bar. It clears itself
automaticallly, but we would
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, February 11, 2005 5:26 AM
To: squid-users@squid-cache.org
Subject: [squid-users] Banning all other destinations
SNIP
The dstdomain .gov denied .gov.au so I reverted to dstdom_regex although,
like
On Fri, 11 Feb 2005 [EMAIL PROTECTED] wrote:
Checked the duplex and both were auto. Set both to full and still have the same
problem. (HP server w/Intel NIC, Cisco switch).
Any one else have any ideas?
Maybe tcpdump to inspect the traffic to try to figure out what is going
on?
Regards
Henrik
On Fri, 11 Feb 2005, thomas wrote:
No firewall in between browsing machine and squid proxy. Squid proxy
parent is another proxy running Netscape proxy. Browsing machin and
both proxy are same network.
Are your Squid inside a firewall? If so, have you read the FAQ?
Regards
Henrik
On Fri, 11 Feb 2005, Esteban Darreche wrote:
Try with this line
auth_param basic program /usr/lib/squid/squid_ldap_auth -u cn -b
ou=DEPARTMENT,o=COMPANY -h LDAPSERVER
-f cn=%s
would be better than -u here...
Regards
Henrik
On Fri, 11 Feb 2005 [EMAIL PROTECTED] wrote:
4) I had also to add in the file configure the lines :
ac_help=$ac_help
--enable-wccpv2 Enable Web Cache Coordination V2 Protocol
This is done by running the bootstrap.sh script.
Everything seems to be OK but instead of compiling wccpv2.c was
On Fri, 11 Feb 2005, Russ Uhte wrote:
Actually, the new Cisco recommendation is to make sure that all devices that
can autonegotiate are setup to autonegatiate. Hard coding speed/duplex is
now considered obsolete and should only be used in very rare circumstances,
or with older
On Fri, 11 Feb 2005, Amado wrote:
Can someone tell me who I can figure out if squid cache is corrupt?
We are having intermittent problems, where for example, if I type
www.google.com I end up with a page from a different site -- but
google.com is till in the URL Address bar. It clears itself
On Fri, 11 Feb 2005, Henrik Nordstrom wrote:
On Fri, 11 Feb 2005 [EMAIL PROTECTED] wrote:
Checked the duplex and both were auto. Set both to full and still have
the same problem. (HP server w/Intel NIC, Cisco switch).
Any one else have any ideas?
Maybe tcpdump to inspect the
I was finnaly able to work with the -f. Upon testing internet access
is SLOW! Can I turn off caching? We have a very BIG pipe to the net so
caching is not necessary. Thanks again
Henrik Nordstrom [EMAIL PROTECTED] 02/11/05 01:43PM
On Fri, 11 Feb 2005, Esteban Darreche wrote:
Try with
Varun wrote:
Is it possible have net2phone working through
squid.
That would be a good question to ask net2phone.
If the software supports tunnelings its native protocol over HTTP, then the
answer is yes. Otherwise, no.
Adam
hi there,
the patch for SSL accelerator support is broken in STABLE8.
http://devel.squid-cache.org/ssl/
i got always compile errors. it's same if i apply all patches
for STABLE7, but i dont know, which patch causes the
compile error. i think its one of the minor patches, because
all secuirty and
On Fri, 11 Feb 2005, Thomas Werner wrote:
hi there,
the patch for SSL accelerator support is broken in STABLE8.
http://devel.squid-cache.org/ssl/
i got always compile errors.
Any rejects when you apply the patch?
http.c: In function `httpBuildRequestHeader':
http.c:970: structure has no member
33 matches
Mail list logo