On 30.09 04:26, Awie wrote:
> Perhaps the question is "Why do I need squid -k shutdown?"
>
> Sometimes, Squid cannot run after system booting (put Squid in rc.local). No
> webcache running checked by netstat -a,
what does 'ps -axuww | grep squid' output say?
> but system claims that Squid is exi
First of all I am not sure if this is a squid problem but it is where the
errors are so I will start here. I have a fc3 box with squid 2.5.11, dg
2.8.0, and shorewall 2.4.2. I have routing and everything working great
with an external interface(eth0), dmz(eth1),and 2 internal lans(eth3,4)
Here is
Hi Matus
> On 30.09 04:26, Awie wrote:
> > Perhaps the question is "Why do I need squid -k shutdown?"
> >
> > Sometimes, Squid cannot run after system booting (put Squid in
rc.local). No
> > webcache running checked by netstat -a,
>
> what does 'ps -axuww | grep squid' output say?
OK, I will do
Hello,
I allready ask about a problem on ntlm_auth a few weeks ago, I do have some
more info:
when I start squid with ntlm_auth I have:
ntlm_auth: error opening config file /usr/local/samba/lib/smb.conf. Error
was Illegal byte sequence
but when I try to do that by hand:
bash-3.00# /opt/samba/bin/n
> -Original Message-
> From: Joshua Morgan [mailto:[EMAIL PROTECTED]
> Sent: Thursday, September 29, 2005 6:43 PM
> To: squid-users@squid-cache.org
> Subject: [squid-users] multiple campuses/branches setup
>
>
> hi there,
>
> at the moment i am trying to find a way to implement squid as
Hello,
Some of our uses cannot get to open the below site via squid, any help ??
www.mofcom.gov.cn
Thanks and Rgds,
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> Sent: Friday, September 30, 2005 6:32 AM
> To: squid-users@squid-cache.org
> Subject: [squid-users] Squd - Dansguardian - Shorewall, Please Help!!
>
>
Problem described in good detail (intercepting proxy not worki
On Thu, 29 Sep 2005, Hirsch, Ben wrote:
Thanks for the reply. Is this the patch I need:
http://devel.squid-cache.org/cgi-bin/diff2/ssl-2_5?s2_5 ?
Yes.
I can not seem to find the configuration directive(s) I should be using.
The ones pertaining to CA's seem to apply to Squid's ability to ve
Can't get to the site at all, or it takes forever to load/is timing out?
If the ladder is the case, consider the fact that the site is 22 hops away
(at least from me).
If it's the former, what is the error message? Connection Timed Out ?
Might need to boost the timeout setting because it liter
On Fri, 30 Sep 2005, Awie wrote:
I got a new result by doing test.
Perhaps the question is "Why do I need squid -k shutdown?"
Sometimes, Squid cannot run after system booting (put Squid in rc.local). No
webcache running checked by netstat -a, but system claims that Squid is
exist when I try
Hello,
I have been trying to get wccp and squid to work and have been unsuccessful so
far. I have followed the FAQ at
http://www.squid-cache.org/Doc/FAQ/FAQ-17.html#ss17.13 with the following
configurations
Trustix 2.4.31 squid 2.5S10
Slackware 2.4.31squid 2.5S10
Slackware 2.
> httpd_accel_single_host on
> httpd_accel_with_proxy on
> httpd_accel_uses_host_header on
Turn these off.
---
Chris Covington
IT
Plus One Health Management
75 Maiden Lane Suite 801
NY, NY 10038
646-312-6269
http://www.plusoneactive.com
On Fri, 30 Sep 2005, Paul Matthews wrote:
[EMAIL PROTECTED] /]# wbinfo -a mydomain\\myusername%mypassword
plaintext password authentication succeeded
challenge/response password authentication succeeded
Then the authentication subsytem in your winbind seems to be working
fine, to the level th
This is the FAQ I have already followed...
What is an MuA?
Thanks,
Bryan
-Original Message-
From: Odhiambo Washington [mailto:[EMAIL PROTECTED]
Sent: September 30, 2005 4:06 PM
To: Shoebottom, Bryan
Subject: Re: [squid-users] WCCP: Web Cache ID 0.0.0.0
* On 30/09/05 15:21 -0400, Shoeb
On Thu, 29 Sep 2005, Dominik Schmid wrote:
When i try to access a https page with the internet explorer and i'm
currently not authorized, i get the invalid header error.
The request in the squid access.log shows, that the request is being sent in
http protocol and not htttps...
This is a kno
On Fri, 30 Sep 2005, Shoebottom, Bryan wrote:
This is the FAQ I have already followed...
So how far did you get?
What is an MuA?
Mail user Agent.
Regards
Henrik
On Fri, 30 Sep 2005 [EMAIL PROTECTED] wrote:
ntlm_auth: error opening config file /usr/local/samba/lib/smb.conf. Error
was Illegal byte sequence
Have seen this error mentioned before. Don't remember what the resolution
was. Try searching in google or similar.
but when I try to do that by
On Thu, 29 Sep 2005, R.J. Baart wrote:
Problem solved; no easy job. Henrik Nordstrom assumption was correct:
bootstrap.sh should have been run. But my debian system did not have the
correct autoconf and automake versions. After installing the correct (but old)
Squid-2.5 is quite old. Initial
Hello there,
I'm trying to setup a transparent squid with an upstream proxy that
needs authentication.
I've already tried:
http://www.squid-cache.org/Doc/FAQ/FAQ-23.html#ss23.6
The relevant options of the squid.conf:
cache_peer localhost parent8080 7 login=PASS proxy-only
no-query
> -Original Message-
> From: Nicolas Velasquez O. [mailto:[EMAIL PROTECTED]
> Sent: Friday, September 30, 2005 3:52 PM
> To: squid-users@squid-cache.org
> Subject: [squid-users] transparent configuration with upstream proxy
>
>
>
> Hello there,
>
> I'm trying to setup a transparent squi
On Sat, 1 Oct 2005, Dominik Schmid wrote:
Then tell me why it works on squid 2.4?
Because Squid-2.4 did not support persistent connections on error pages.
There must be something changed in squid 2.5
Yes, error pages now support persistent connections to support NTLM
authenticati
Hummm, so it is impossible using 2 proxies??
El Vie 30 Sep 2005 19:12, Chris Robertson escribió:
> > -Original Message-
> > From: Nicolas Velasquez O. [mailto:[EMAIL PROTECTED]
> > Sent: Friday, September 30, 2005 3:52 PM
> > To: squid-users@squid-cache.org
> > Subject: [squid-users]
22 matches
Mail list logo