Hello,
Is it possible for squid to accept proxy authentication via a web page
(FORM based maybe?) instead of causing the browser to pop up a dialogue
box? Basically I would like for all the authentication to be done via
one web page, this way I can give user's more information..
Sean.
Saturday, December 10, 2005, 2:33:12 AM, you wrote:
Hello Chris, and hello All,
Well I found out why I couldn't access Webmin when the Squid was
running. It is really stupid, and I feel REALLY stupid. But I prefer
to tell you what was wrong anyway, you have helped me understand Squid
a lo
Hello Chris,
Friday, December 2, 2005, 7:25:31 PM, you wrote:
CR> I maintain this is no longer a Squid error. The TCP CONNECT is
CR> succeeding (200 status code). Check your WebMin config, and
CR> verify that connections from 192.168.1.10 are allowed. Otherwise
CR> you are going to have to in
Hello!
I was trying to find solution for my problem for a long long time, but
I had no luck. Everything started when I installed Gentoo with Squid on
64 bit architecture. It is dual Xeon 3.4 with 2 GB of RAM. My CFLAGS are
"-O3 -march=nocona -pipe -fomit-frame-pointer". It didn't happen on 32
On Thu, 2005-12-08 at 16:16 -0700, Laurie wrote:
> On Wed, 2005-12-07 at 21:51 +0100, Matus UHLAR - fantomas wrote:
> >
> > Maybe you encountererd this bug:
> > Document that tcp_outgoing_xxx works badly in combination with
> > server_persistent_connections
> > http://www.squid-cache.org/Versions
>
> Hi all,
>
> How do i forward a particular website to another parent proxy and remaining
> websites to the default website.
>
> Thanks & Regards
> Stanley
>
Check the cache_peer_access directive in squid.conf.default.
And read all the comments.
M.
> Hi Mark!
>
>I defined user nobody as owner of cache directory and the squid -z runsn
> ok. But the next step (RunCache &)has errors:
>
> jiboia:/usr/local/squid/var# squid -z
> 2005/12/09 12:42:16| Creating Swap Directories
> jiboia:/usr/local/squid/var# /usr/local/squid/bin/RunCache &
> [1]
It is in transparent mode. There is no need to configure anything in the
browser.
I think I pasted the acl config... Anyway here it goes again.
# CONFIGURACAO DE ACCESS LISTS #
acl all src 0/0
acl minha_rede
Hello,
I'm running squid 2.5.12 on a freebsd6 box. It is working great thus
far, though i'm going to be adding porn and popup blocks with redirectors.
My major question is i want to change the default signature delivered for
error pages. I read the faq and it indicated that squid uses %T for
Hi all,
How do i forward a particular website to another parent proxy and remaining
websites to the default website.
Thanks & Regards
Stanley
We had a power outtage a couple of days ago and ever since my transparent
proxying is working very slowly.
When I enter the proxy manually in my browser, I get nice and fast speed. When
I remove the proxy info and go directly through my firewall without the proxy
forced I get good speed. Howe
>
> I´m running with root
>
Don´t : use squid.conf to define a user and group for SQUID to
run under. Make sure that the for the cache dir(s) is writeable
for this user and group.
M.
> Hi
>
> I installed squid-2.5.STABLE12 in a Debian machine and it didn´t create the
> /usr/local/squid/var/cache. And when I tried to execute the command:
>
> squid -z
>
> I get:
>
> jiboia:/usr/local/squid/var# squid -z
> 2005/12/09 10:34:36| Creating Swap Directories
> FATAL: Failed to make
Here is the config...
If you guys find anything that is unrelevant in my config, please tell me
because this is a home environment. Many things here I copied from other
configs (I don't know what the whole QUERY context means).
Thank you
# ARQUIVOS DE C
On Friday 09 December 2005 12:13, Palula Brasil wrote:
> I've been receiving some links to executables files through my email and
> the link comes like this: www.somesite.com.country/urlpath/file.exe:8080
>
> The problem is that I putted the ".somesite.com.country" on the
> bad_sites acl and it sti
Hi
I installed squid-2.5.STABLE12 in a Debian machine and it didn´t create the
/usr/local/squid/var/cache. And when I tried to execute the command:
squid -z
I get:
jiboia:/usr/local/squid/var# squid -z
2005/12/09 10:34:36| Creating Swap Directories
FATAL: Failed to make swap directory /usr
More information: We are a 95% IE shop, so it wasn't fully verified
until now, but it's limited to Internet Explorer through Squid.
Mozilla works fine. So,
amazon.com <---> Squid <---> InternetExplorer
any change in any of those three and it works fine. I am going to
contact amazon, for what i
Can you use ACL's when running in a reverse proxy config?
I've noticed internal IPs are not replaced with the external IP anymore
after using a regex ACL.
squid v2.5s5
thanks,
greg
On Friday 09 December 2005 12:13, Palula Brasil wrote:
> I've been receiving some links to executables files through my email and
> the link comes like this: www.somesite.com.country/urlpath/file.exe:8080
>
> The problem is that I putted the ".somesite.com.country" on the
> bad_sites acl and it sti
On Friday 09 December 2005 12:50, Jacob, Stanley (GE Consumer Finance,
consultant) wrote:
> > Please help me in removing the following message from squid cache
> > denied message
> >
> > Generated Fri, 09 Dec 2005 11:09:39 GMT by PROXY (squid/2.5.STABLE9)
Use...
...in your error messages.
Hi
a small question :
Actually, i use Squid with a Active Directory Authentification for a
network with 20 000 users.
i use this configuration:
=
auth_param ntlm program /usr/bin/ntlm_auth
--helper-protocol=squid-2.5-ntlmssp
auth_
Fedora Core 3
- Original Message -
From: "Tim Bates" <[EMAIL PROTECTED]>
Cc:
Sent: Friday, December 09, 2005 10:50 AM
Subject: Re: [squid-users] 2.5 Stable6 Upgrade process
What distro (fedora, mandrake, etc) are you using? Hopefully someone can
then point you to a binary package of t
What distro (fedora, mandrake, etc) are you using? Hopefully someone can
then point you to a binary package of the correct flavour.
Palula Brasil wrote:
I got Squid to work on my machine. Anyhow I am a very unexperienced Linux
user and would like to know what would be the easiest way to upgra
I got Squid to work on my machine. Anyhow I am a very unexperienced Linux
user and would like to know what would be the easiest way to upgrade my
Squid, currently stable6, to stable12.
For example if a problem happens, is it easy for me to reload my working
stable6 version.
The only way I know to
Hi there evrybody!
I've been receiving some links to executables files through my email and the
link comes like this: www.somesite.com.country/urlpath/file.exe:8080
The problem is that I putted the ".somesite.com.country" on the bad_sites
acl and it still is permitting access thos files.
Can any
> Hi All,
>
> Please help me in removing the following message from squid cache denied
> message
>
> Generated Fri, 09 Dec 2005 11:09:39 GMT by PROXY (squid/2.5.STABLE9)
>
> Regards
> Stanley
dilip, thank you very much for your answer. But I successfully
implement it with max_user_ip acl.
On 12/9/05, DILIP MANSUKHANI <[EMAIL PROTECTED]> wrote:
> You can do this by using mac address given to that m/c
> and create policy using mac address that will help you
>
> regards
> dilip
>
>
> On
Thanks,
Still no luck with the authentication via smb_auth. The auditing doesn't log
any failure events. Also the Network monitor on the server captures about 5
packets when I try to do the authentication. None of these packets relate to
SMB, they are all just NBT packets.
Any other Ideas.
> --
Hi
Thanks, so now I have PHP running and working I believe. However when I go to
the sarg-realtime.php, it shows up, but empty. It even refreshes every 3
seconds, but I dont know why it is all empty. How do I configure that?
Thanks
Ben
-
29 matches
Mail list logo