Sir
I am new to linux .When i am configuring squid i am getting the error
Unable to determine IP address from host name.The dnsserver retured:
Refused:The nameserver refuses to perform the specified action
Please help me. I am using Squid/2.5.STABLE.1. I am running squid on
IBM server with two
Anyone able to assist me with the setup of Squid; I'm confused, there is
no setup.exe
--
The information contained in this message may be confidential
and is intended for the addressees only. If you have received
this
Hi,
After configuring squid with LDAP support it always pop up the user
name and pssword window for authentication but if you configured
squid with NTLM support the authentication will be transparent to the
users.
Regards,
Vaibhav
On 5/2/06, Om [EMAIL PROTECTED] wrote:
Hi Friends,
* On 08/05/06 14:42 +0800, Shawn Owens wrote:
| Anyone able to assist me with the setup of Squid; I'm confused, there is
| no setup.exe
Go to and download Squid for Windows:
http://www.acmeconsulting.it/SquidNT/download.html
... and please don't send the crap below to the list!
cut
|
Hi,
Mehdi Sarmadi wrote:
I tried to use squid for acceleration for a website that needs to
authenticate it's client using NTLM Authentication.
The problem is, when I use it to access that website it shows me the
IIS Authentication Failure Page.
Why it does not forward the authentication
Hi Vaibhav,
Thanks for your mail.
If you have configured squid with LDAP authentication,
can you provide me any resources for that.
Thanks,
Omprakash,
Effigent India Pvt Ltd,
Hyderabad.
VAIBHAV NALDURGKAR wrote:
Hi,
After configuring squid with LDAP support it always pop up the user
name and
Thank you very much Yong,
I will try this and let you know the result.
Thanks for your support.
Thanks,
Om.
Yong Bong Fong wrote:
Hi there,
Heres how I configure my ldap-squid authentication:
1) Make sure you have squid_ldap_auth support for your squid
2) In squid.conf configure your
Hi,
I've inherited a Squid 2.5 box that uses Websense for filtering and
squid_radius_auth against a Cisco ACS system for authentication.
This system asks for your username and password every fifteen minutes.
Trying to find where this is set is driving me nuts. I understand
that Squid does not
On Mon, May 08, 2006 at 07:41:02AM -0400, Michael W. Lucas wrote:
I've inherited a Squid 2.5 box that uses Websense for filtering and
squid_radius_auth against a Cisco ACS system for authentication.
This system asks for your username and password every fifteen minutes.
Trying to find where
Hi
i am useing this config :
**
acl fullaccess src 127.1.10.5/255.255.255.255
acl halfaccess src 127.1.10.0/255.255.255.255
acl noneaccess src 127.0.0.1/255.255.255.255
acl filter1 url_regex -i /urls.txt
acl filter2 url_regex -i mysite.com
Here we go
Squid Authentication over LDAP (ADS 2003)
Software:
1. Squid Cache: Version 2.5.STABLE1
Compiled with --enable-basic-auth-helpers=LDAP
2. squid_ldap_auth (this program most of the time get installed with
installation of squid)
3. An installed windows 2003 LDAP
On Mon, May 08, 2006 at 03:30:17PM +0430, power159 wrote:
i am useing this config :
**
acl fullaccess src 127.1.10.5/255.255.255.255
acl halfaccess src 127.1.10.0/255.255.255.255
acl noneaccess src 127.0.0.1/255.255.255.255
acl filter1
Hi Christ
with my configuration every thing working ok ! i have problem only with
errors ! :(
Now :
127.1.10.5full access without any problem
127.1.10.0half access ( only sites that are in urls.txt ) but showing
standard error !
127.0.0.1 can access to only mysite.com and showing
(too lazy to tidy up the TOFU)
I believe that your configuration is working. But you are not understanding
the way deny_info works. Re-read my mail.
Christoph
On Mon, May 08, 2006 at 05:39:14PM +0430, power159 wrote:
Hi Christ
with my configuration every thing working ok ! i have problem
On Mon, May 08, 2006 at 02:01:09PM +0200, Christoph Haas wrote:
On Mon, May 08, 2006 at 07:41:02AM -0400, Michael W. Lucas wrote:
I've inherited a Squid 2.5 box that uses Websense for filtering and
squid_radius_auth against a Cisco ACS system for authentication.
This system asks for your
On Mon, May 08, 2006 at 10:21:38AM -0400, Michael W. Lucas wrote:
On Mon, May 08, 2006 at 02:01:09PM +0200, Christoph Haas wrote:
Not quite right. You can indeed enforce re-authentication. It's just
lousily documented. See:
Hello all,
i have a problem with the squid_ldap_auth helpers. I'm trying to authenticate
against an Active Directory (W3K). For the following command this works fine:
./squid_ldap_auth -b ou=myOU,dc=foo,dc=domain,dc=com -s sub -D [EMAIL
PROTECTED] -w squidpwd -f
Okey ! i tried follwoing confings and its working ! with all configs (IPS)
and all errors pages is working
**
acl fullaccess src 127.1.10.5/255.255.255.255
acl halfaccess src 127.1.10.0/255.255.255.255
acl noneaccess src 127.0.0.1/255.255.255.255
acl filter1
On Mon, May 08, 2006 at 06:26:11PM +0430, power159 wrote:
Okey ! i tried follwoing confings and its working ! with all configs (IPS)
and all errors pages is working
**
acl fullaccess src 127.1.10.5/255.255.255.255
acl halfaccess src
Hi Folks,
What is the best way to have two squid machines synchronize/reference
each other's data? I see ICP, digesting, htcp etc...
is COSS stable enough to use it in production? it will (in theory) be much
more I/O friendly.
thanks Wojtek
On Sun, May 07, 2006 at 08:51:19PM -0700, Juntao Gao wrote:
I want to get some sucessful story for squid on Sun
Sparc platform.
I'm currently running squid on Solaris 10/Sparc as a http accelerator for
several sites.
Has worked well for us over the last year now.
10k clients doesn't really
Thanks Christoph
but now i have more problems
your configuration result :
fullaccess : working without problem ...
halfaccess : when visiting sites that isnot in URLs.txt , it showing
custom error But when visiting sites that are in URLs.txt it showing
ACCESS DENIED ( standard error page
On Mon, May 08, 2006 at 06:52:41PM +0430, power159 wrote:
Thanks Christoph
but now i have more problems
your configuration result :
fullaccess : working without problem ...
halfaccess : when visiting sites that isnot in URLs.txt , it showing
custom error But when visiting sites that
I want to get some sucessful story for squid on Sun
Sparc platform.
We are running Squid 2.5STABLE13 on Solaris 10 X86 on two V20z for several 1000
Users.
I'm currently running squid on Solaris 10/Sparc as a http accelerator for
several sites.
Has worked well for us over the last year
I want to get some successful story for squid on
Sun Sparc platform.
We used to service several thousand users through parallel parent
cache forward proxies deployed on E280. These had the advantage of
our choice to deploy local child cache servers at the various remote
intranet sites; parent
On Mon, May 08, 2006, Michael Pye wrote:
The linux epoll is much more efficient and doesn't use anything like the
large amounts of cpu that poll does when hundreds of file descriptors
are in use. This is the reason I would guess Linux would be better
peformer; this is pure conjecture
On Mon, May 08, 2006, Wojciech Puchar wrote:
is COSS stable enough to use it in production? it will (in theory) be much
more I/O friendly.
Not yet. I'm doing quite a lot of work at the moment to make it
production-ready but I don't have a timeline.
Adrian
Michael Loftis wrote:
--On May 4, 2006 1:29:00 PM -0300 [EMAIL PROTECTED] wrote:
Hello!
Squid is dying with no apparent reason from time to time...
I only see in cache.log:
FATAL: Received Segment Violation...dying.
Segfaults are usually one of about three things (most common to least
29 matches
Mail list logo