On 07.06.06 20:46, Mehdi Sarmadi wrote:
It could be right, but this value was because of the performance
that I wanted for fast reply.
Do you mean,do you want to receive fast error message instead of
I hope the problem were this timeout value.
But, you know, this problem is recently
I'm try install squid to SMP machine, I've ran two copy of squid, and balance load between them. But I haven't seen any difference if I run one or two copy of squid, first
processor has higher load then second. Is it normal? How can I see what cpu number squid used?
1) This is output of sar
The link I'm using for web service is an Internet Sattelite Link with
560ms lag and 1mbps for receive and 256kbps for send, and a
Point-To-Point Sattelite Duplex link with 520ms lag and 256kpbs BW.
Concurrent usage of web is at most 75 simultinous sessions, and
average 45 simultinous sessions.
I
tor 2006-06-08 klockan 09:29 +0200 skrev Matus UHLAR - fantomas:
it depends on your clients connection. If you have dialup clients which post
much data (e.g. sending huge attachments through webmail), you should count
how much does sending 10 MB of data through 28800 bps connection...
Not
tor 2006-06-08 klockan 13:40 +0600 skrev Sergey Velikanov:
I'm try install squid to SMP machine, I've ran two copy of squid, and
balance load between them. But I haven't seen any difference if I run
one or two copy of squid, first processor has higher load then second.
Is it normal? How can I
On Wed, 2006-06-07 at 11:12 +0330, Mehdi Sarmadi wrote:
Dears
I've problem with upload use, uploads more than 1MB get broken often.
What should affect on such usage? Any configuration directive or
system hardware?
Hi,
If the error(time out) is due to the read_timeout then that will be
On Wed, 2006-06-07 at 08:17 -0700, Daniel EPEE LEA wrote:
Hello,
Does anyone have links about squid + websense
integration ?
Is there an altenative to Websense in the opensource
world ?
Thanks for links and advice.
Regards,
Daniel
On 08.06.06 13:40, Sergey Velikanov wrote:
I'm try install squid to SMP machine, I've ran two copy of squid, and
balance load between them. But I haven't seen any difference if I run one
or two copy of squid, first processor has higher load then second. Is it
normal? How can I see what cpu
On Wed, 2006-06-07 at 13:32 -0300, Palula wrote:
Ok... I can't figure this one out...
I've just upgraded my Squid to 2.5/STABLE11 with yum (previously was using
2.5/STABLE6). And this problem started.
I receive this message on the clients browsers:
The requested URL could not be
flow these steps
1. wget
http://www.squid-cache.org/Versions/v2/2.5/squid-2.5.STABLE14-20060530.tar.gz
2. tar -zxvf squid-2.5.STABLE14-20060530.tar.gz
3. cd squid-2.5.STABLE14-20060530
4. ./configure --prefix=/usr/local/squif
5. make all
6. sudo suhit enter and when it ask u about
On Thu, 2006-06-08 at 03:03 +0500, Naveed Razaq wrote:
hi
any body who can help me to configure squid on ubuntu
thank
naveed razaq
Hello Razag,
Install squid with
#apt-get install squid
and edit the squid conf file as your needs
refer http://squid.visolve.com/squid/sqguide.htm for
I don't have dns_nameservers congifured at squid.conf. Instead, I use two
DNS' on resolv.conf. Which worked really fine for Squid 2.5/STABLE6.
I'll put this line on squid.conf and try it out. I'll use the same dns' used
in resolv.conf and try it out.
By the way, I got squid working by putting in
On Tue, May 30, 2006 at 05:00:02PM +0100, Chris Lightfoot wrote:
I am looking at deploying squid as an HTTP accelerator in
front of a site which uses an IP-to-country lookup to vary
certain elements of the site's content. Obviously I can't
specify this information in the Vary: header; I could
I have a squid 2.5.9 setup used as an HTTP accelerator in
front of a site which was previously served by apache
alone. For various reasons some parts of the site are
served using mod_proxy in apache, calling back into itself
(typically this is so that we can cross a privilege
boundary, since
1. Which options Squid needs to be complied with to be able to
authenticate against Windows 2003 R2 Active Directory with 2003
Functional Domain Level enabled?
2. Which authentication helper would work in this situation?
Thanks a lot for help.
Regards,
Alex Meyerovich
Hi!
We have 300 users with 100(200 Full Dublex)Mb connection to our LAN
with has 2(4 Full Dublex)Gigabit
backbone.
We plan to make Transparent Proxy server with Gigabit connection to
our LAN.
We plan to make the separation of port 80 traffic and other traffic
with own Linux router that
tor 2006-06-08 klockan 14:01 -0400 skrev Meyerovich Aleksandr EB_NY:
1. Which options Squid needs to be complied with to be able to
authenticate against Windows 2003 R2 Active Directory with 2003
Functional Domain Level enabled?
The question is more which Samba version is required as it's
How to enable selective access using ntlm_auth for one specific group in
a domain.
Thanks a lot!
Alex
-Original Message-
From: Henrik Nordstrom [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 08, 2006 3:58 PM
To: Meyerovich Aleksandr EB_NY
Cc: squid-users@squid-cache.org
Subject: Re:
Hello people,
I would like to present a new website: http://www.urldb.com.br
There you can find lots of txt files with list of domains and urls to =
use with squid.
Take a look
Thanks
Luiz Gustavo F. dos Santos
Desenvolvimento Flai Security/Nexus
America Net - http://www.america-net.com.br
We are trying to find a place in the Squid2.5STABLE14 code that would allow
us to act on, and process, a complete file received by Squid prior to the
client receiving the information. We thought that turning storebuffer() on,
in the httpReadReply function in http.c, would allow the storeentry to
Odhiambo WASHINGTON wrote:
* On 07/06/06 12:05 +0400, Teller Sgt Robert J (GCE RCT-7 DATA NCOIC) wrote:
| I am currently using squid 2.5 running on my firewall with port
| redirection with ntlm auth. Is it possible to setup an acl so specific
| users will not be cached at all during certain
James Stewart wrote:
I have Squid set up as a reverse proxy pointing back to an Apache/PHP
web server. I'm trying to convince squid to cache the output of PHP
scripts but with mixed success.
I've reduced my test to a basic script that runs phpinfo();. When I
connect to the page via my squid
Pasi Pekka Leinonen wrote:
Hi!
We have 300 users with 100(200 Full Dublex)Mb connection to our LAN
with has 2(4 Full Dublex)Gigabit
backbone.
We plan to make Transparent Proxy server with Gigabit connection to
our LAN.
We plan to make the separation of port 80 traffic and other traffic
tor 2006-06-08 klockan 16:19 -0400 skrev Meyerovich Aleksandr EB_NY:
How to enable selective access using ntlm_auth for one specific group in
a domain.
See the FAQ, and numerous other guides floating around on the net..
Recommended Search Keywords: Squid wbinfo_group howto
Regards
Henrik
Discussion moved to squid-dev where it fits better..
tor 2006-06-08 klockan 17:04 -0400 skrev Rich Maring:
We are trying to find a place in the Squid2.5STABLE14 code that would allow
us to act on, and process, a complete file received by Squid prior to the
client receiving the information. We
tor 2006-06-08 klockan 21:22 +0200 skrev Pasi Pekka Leinonen:
2) Is it a good way to do the transparensy routing of port 80 with
another linux server than where squid is running? Is this good way to
do this? Any problems doing it this way?
This is best done with policy routing to have the
dns_nameservers did it!
Thanks a lot.
- Original Message -
From: Palula Brasil [EMAIL PROTECTED]
To: Visolve squid [EMAIL PROTECTED]
Cc: squid-users squid-users@squid-cache.org
Sent: Thursday, June 08, 2006 10:02 AM
Subject: Re: [squid-users] Squid - Upgrading Weird Problem - Timeout
27 matches
Mail list logo
