Reid ha scritto:
Sounds very very much as if there is a firewall blocking access to port
3128.
Regards
Henrik
Could you advise of how I can determine if there is some firewall running?
Here is a list of running processes:
Thank you
1 root Jun26 init [2]
2 root Jun26 [migration/0]
3 root
tor 2007-06-28 klockan 12:57 +0200 skrev [EMAIL PROTECTED]:
Hello. I have an Squid proxy cache configured as frontend of a Coocoon
server.
The problem is I always get a TCP_MISS. Here is an example of two clicks (2
seconds between them) over the same link:
1183027652.407320
On Fri, 2007-06-29 at 13:20 +0800, squid squid wrote:
Hi,
I have servers running Squid 2.6 Stable 12 and have managed to install MRTG
2.15.2 on these servers. In view that there are so many graphs seen for
monitoring of squid using MRTG, kindly advise what are the necessary graphs
that I
Hi,
Thank you for the reply.
Kindly advise what would be the matching MRTG graphs plotting that I should
set for the graphs that you have.
Kindly also advise on the SNMP error that I have and how can it be resolved.
Regards.
From: Henrik Nordstrom [EMAIL PROTECTED]
To: squid squid [EMAIL
I am setting up a reverse proxy cache using squid (squid/2.6.STABLE12)
but i have a little problem : i want to cache only pages served to
authenticated (via php) users. When a user is authenticated, i add a
cookie named jvpc_log, and i want to tell squid to forward all the
requests to my
Hi!
I use Squid for years now as loadbalancer and accelerator.
Lately our ISP decided to replace the whole IP range we use. To ease
transition we were given a two months period in which the old and new
IPs are working the same time.
As soon as we start using the second IP on our proxy
ajit kumar wrote:
Hi,
I am using squid with Stable13 as a transparent proxy.
All is working fine. There is a problem with
mail.yahoo.com
However mail.yahoo.com will let me login. It will
display the contents of the mail box. When i click on
the mail to see the content it only shows the header
Can you post your squid.conf file?
I had this same issue and I solved it with:
acl Special dstdomain .yahoo.com
...
always_direct allow Special
-Original Message-
From: Amos Jeffries [mailto:[EMAIL PROTECTED]
Sent: Friday, June 29, 2007 4:00 AM
To: ajit kumar
Cc: Squid
Subject: Re:
Peter, you should upgrade your squid to latest stable (for many
reasons), but mostly because it implements url monitor for cache
peers, this method is far more usefull since It checks your apache is
working fine, not just the machine is running.
eg.
cache_peer Y.Y.Y.Yparent 80 0
On 6/28/07, Andreas Pettersson [EMAIL PROTECTED] wrote:
Kinkie wrote:
On 6/27/07, Andreas Pettersson [EMAIL PROTECTED] wrote:
Hi list.
I'm trying to have usernames logged in access.log, but I'm not (at the
moment) interested in any kind of authentication. It should be more like
a bonus, so
We are in the process of updating our reverse proxys to squid-2.6.
In general all connections are working successfully, but we are having
some troubles with specific connections, -redirected connections-
specifically, for example.
Related Squid configuration 2.6
These are the results of running the commands. Does it look like there is
anything that could be
interfering with port 3128 connections?
iptables-save
# Generated by iptables-save v1.2.11 on Thu Jun 28 15:32:38 2007
*nat
Does work cause cache_peer won't allow two lines with the same ip. :(
any ideas how to proceed
-Original Message-
From: Henrik Nordstrom [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 28, 2007 4:03 PM
To: Jason Hitt
Cc: squid-users@squid-cache.org
Subject: Re: [squid-users] Muliple
Do I add those variables to the .conf file?
-Original Message-
From: Henrik Nordstrom [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 28, 2007 5:05 PM
To: Tyson Smith
Cc: squid-users@squid-cache.org
Subject: RE: [squid-users] Invalid URL
tor 2007-06-28 klockan 16:17 -0500 skrev Tyson
Reid ha scritto:
These are the results of running the commands. Does it look like there is
anything that could be
interfering with port 3128 connections?
iptables-save
# Generated by iptables-save v1.2.11 on Thu Jun 28
Could you advise of how I can determine if there is some firewall running?
Here is a list of running processes:
You cannot see the firewall as it is part of the kernel.
Do a
telnet localhost 3128
If you get ANY response, the port is open for the localhost, if the
command fails immediately
Do a telnet localhost 3128
If you get ANY response, the port is open for the localhost, if the
command fails immediately or it takes ages to fail, there is a firewall
blocking access from localhost. You can do the same from a client in
your network; replace the localhost by the IP of your
telnet localhost 3128
Trying 127.0.0.1...
Connected to localhost.localdomain.
Escape character is '^]'.
Connection closed by foreign host.
I get the same result for ports like 8000, 8080.
Telnet from client to 3128 hangs and doesn't connect. Telnet to other ports
does connect.
Then you
Henrik Nordstrom wrote:
On Fri, 2007-06-29 at 13:20 +0800, squid squid wrote:
Hi,
I have servers running Squid 2.6 Stable 12 and have managed to install MRTG
2.15.2 on these servers. In view that there are so many graphs seen for
monitoring of squid using MRTG, kindly advise what are the
Kinkie wrote:
On 6/28/07, Andreas Pettersson [EMAIL PROTECTED] wrote:
Ok, so there still is the need to do a lookup against the directory
using winbind?
(Somehow I feel this question has an obvious answer, but this is
completely unknown land to me)
Yes, there is no other way to determine
Hello Guys,
I've enabled squid authentication several times, including windows
authentication integration through smb_auth and recently some
squid_ldap_auth for direct LDAP check, without the SMB stuff.
But i was required for doing transparent authentication squid
should be
* Tek Bahadur Limbu [EMAIL PROTECTED]:
I have the following set of graphs:
http://www.henriknordstrom.net/code/squid_statistics/
the rrdtool scripts collecting the graphs is found in the code
Sorry, but I'm probably blind: Where *IS* the code?
--
Ralf Hildebrandt (i.A. des IT-Zentrums)
Hi list,
We have a setup without squid as follows:-
Customer request
http://sales.example.com webserver replied as
https://sales.example.com:8443/abc (they cannot make it 443..!!)
https://sales.example.com:443 also repied as
Reid wrote:
Yes, I meant to say cache.log. If I try to connect via 3128, the browser
times out, and no entry
appears in cache.log.
Hi Reid,
Do the timeouts in your web browser give any indication related to your
Squid proxy server?
Here are the entries in squid.conf, where #.#.#.# is my
Hi,
On a few of my squid boxes, I get:
ERROR
The requested URL could not be retrieved
I am using 2.6.13 STABLE and the configuration files are the same so I
don't know what is going on. When I say the same, the only differences
are in the DNS names of the server squid is running on. Below is
Hi,
All those tests checked out - the commands did not produce any errors.
Here are the uncommented lines from my squid.conf.. See anything that might
block 3128? Thanks
WELCOME TO SQUID 2.6.STABLE5
hierarchy_stoplist cgi-bin ?
acl QUERY urlpath_regex cgi-bin \?
Ralf Hildebrandt wrote:
* Tek Bahadur Limbu [EMAIL PROTECTED]:
I have the following set of graphs:
http://www.henriknordstrom.net/code/squid_statistics/
the rrdtool scripts collecting the graphs is found in the code
Sorry, but I'm probably blind: Where *IS* the code?
Thank you everyone for your help. The dedicated server company where my squid
is located has just
reported to me that we are blocking outgoing connections on tcp/3128 port for
security reasons.
Does this mean that they are a squid unfriendly company? Is there any reason
to block that port,
and
Reid wrote:
Thank you everyone for your help. The dedicated server company where my squid
is located has just
reported to me that we are blocking outgoing connections on tcp/3128 port for
security reasons.
Does this mean that they are a squid unfriendly company? Is there any reason
to block
Hi guys
i've linux box that running on squid,
squid authenticate with radius server,the problem is
after some minutes,squid accept any username and
password,when i enter incorect username ,passwd,squid
or radius accept and brows the web page, after
reading many documentation,i couldn't
many scanners look for open proxies on port 3128 and 8080.
mike
At 12:52 PM 6/29/2007, Tek Bahadur Limbu wrote:
Reid wrote:
Thank you everyone for your help. The dedicated server company
where my squid is located has just
reported to me that we are blocking outgoing connections on
tcp/3128
Reid wrote:
Thank you everyone for your help. The dedicated server company where my squid
is located has just
reported to me that we are blocking outgoing connections on tcp/3128 port
for security reasons.
Does this mean that they are a squid unfriendly company? Is there any
reason to
Thank you everyone for your help. The dedicated server company where my squid
is located has just
reported to me that we are blocking outgoing connections on tcp/3128 port for
security reasons.
Does this mean that they are a squid unfriendly company? Is there any reason
to block that port,
Is there a way to do something like this when using coss?
(I would rather not have to use symlinks)
cache_swap_log /cache0/%s
cache_swap_log /cache1/%s
cache_swap_log /cache1/%s
cache_swap_log /cache2/%s
cache_swap_log /cache2/%s
As shown I have 3 disks that I am using for storage. I would
Yes, these are great stuffs. It will be good if we can also have explanation
of what these graphs are monitoring on squid and how these graphs can help
us to track squid performance.
From: Tek Bahadur Limbu [EMAIL PROTECTED]
To: Henrik Nordstrom [EMAIL PROTECTED]
CC: squid squid [EMAIL
35 matches
Mail list logo