Hi,
When using mswin_ntlm_auth.exe does the SquidNT workstation have to be a
member of the domain or can it still work as a Workgroup computer? The
workstations connecting to the SquidNT box are members of the domain,
but I cant have squidNT box itself on the domain (I have my reasons!).
On tis, 2007-11-20 at 19:02 +1030, web wrote:
Hi,
When using mswin_ntlm_auth.exe does the SquidNT workstation have to be a
member of the domain or can it still work as a Workgroup computer? The
workstations connecting to the SquidNT box are members of the domain,
but I cant have squidNT
I activated ACL debugging using:
debug_options ALL,1 33,2
Squid 2.6.16-1 logs:
2007/11/20 13:32:52| The request CONNECT lms.fu-berlin.de:443 is DENIED,
because it matched 'digestauthentifizierung'
2007/11/20 13:32:52| The reply for CONNECT lms.fu-berlin.de:443 is ALLOWED,
because it matched
Hi,
I have a System with two Internet connections.
Is it possible to configure squid to load balance out going internet
traffic through those two Internet Connections?
Thank you so much
Kind Regards
Siju
Quoting Henrik Nordstrom [EMAIL PROTECTED]:
On fre, 2007-11-09 at 16:25 +0100, [EMAIL PROTECTED] wrote:
I encounter An invalid Response on a particular site.
What is said in cache.log?
Cache.log doesn't say much on normal debug settings.
With debug on , it says
2007/11/05 15:02:53|
this is your cache-log right? in access log you should also have denies/allowed
lines, right?
first DENIED should be the authrequest (HTTP 407) from squid telling the
browser to do a (digest) auth.
then the browser answers this with the auth credentials. and squid sends the
page again. don't
Quoting Ralf Hildebrandt [EMAIL PROTECTED]:
According to my config, there are these lines referring to
digestauthentifizierung
# grep -2 digestauthentifizierung squid.conf.WLAN
# Rest erlauben -- aber nur authorisiert!
#
acl digestauthentifizierung proxy_auth REQUIRED
http_access allow
David PAZOS wrote:
Hello,
I've configured squid and it seems to be working as it logs which ip
goes to which website but... I can't see the AD users. I've tested
./ntlm_auth with several usernames and it worked...
If you have any idea of what the problem could be, it will be really
From: Siju George [EMAIL PROTECTED]
I have a System with two Internet connections.
Is it possible to configure squid to load balance out going internet
traffic through those two Internet Connections?
This is assuming that you are running Linux :-
Just set up multiple routing and weight
From: Ming-Ching Tiew [EMAIL PROTECTED]
This is assuming that you are running Linux :-
Just set up multiple routing and weight assignment.
You might have to turn off kernel option which
caches multiple routing.
I meant MULTI PATH routing.
On Nov 21, 2007 6:29 AM, Ming-Ching Tiew [EMAIL PROTECTED] wrote:
From: Ming-Ching Tiew [EMAIL PROTECTED]
This is assuming that you are running Linux :-
Just set up multiple routing and weight assignment.
You might have to turn off kernel option which
caches multiple routing.
Thank
From: Siju George [EMAIL PROTECTED]
Is there any option to do it in the squid.conf file?
I know there is a tcp_outgoing_address option.
just wondering if it is possible to make it use all outgoing IP
address in a round-robin manner :-)
As far as I know, you could do split access
Hello Squid users.
I am using squid for server accelerator.
But my squid server can't cache dynamic image.
My origin server use not local disk.
That use network file system and send image file using ASP function. (
response.write 'filename' )
Look at the 'cache' directive and refresh patterns.
Adrian
On Wed, Nov 21, 2007, Seonkyu Park wrote:
Hello Squid users.
I am using squid for server accelerator.
But my squid server can't cache dynamic image.
My origin server use not local disk.
That use network file system and
On Wed, Nov 21, 2007, Ming-Ching Tiew wrote:
As far as I know, you could do split access using
the 'tcp_outgoing_address' method, but you can't
get squid to use it in round-robin manner.
I might be wrong. :-)
I don't think there is, but making squid do that with a small source patch
Hello List,
I've been trying to send different information to the external helper
via the %{Hdr:member} parameter, but to no avail.
%{Host} and %{HOST} work wonderfully - assuming there is 'no' case
sensitivity?
Where I seem to be failing is, attempting to send any other HTTP host
header
Hi George,
Siju George wrote:
Hi,
I have a System with two Internet connections.
Is it possible to configure squid to load balance out going internet
traffic through those two Internet Connections?
To keep things simple, you can just use the tcp_outgoing_address
parameter in squid.conf.
Thank you for replying to my e-mail.
1) Edit '/etc/squid/mime.conf' added
\.asp$ image/jpeg anthony-image.gif -
image +download
2) tail /var/log/squid/access.log
1.1.1.1 - - [21/Nov/2007:15:42:23 +0900]
18 matches
Mail list logo