ananttickoo wrote:
i am trying to set up a squid but its not asking for authentication.. were
am i going wrong i not able to find out
this is what i am doing
i am using UBUNTU
NIC that i am using is having ip 192.168.7.253
static ip-192.168.7.253
netmask-255.255.255.0
gateway
Henrik Nordstrom wrote:
On lör, 2008-07-19 at 00:54 +1200, Amos Jeffries wrote:
Best option is to give up early and take other easier paths, like
teaching each and every client not to browse porn in the first place. Or
just blocking all non-plaintext traffic unless its pre-vetted.
Using a
On lör, 2008-07-19 at 08:26 +0300, Haytham KHOUJA wrote:
Henrik,
If you'll go with 4000 concurrent users, i'd go for LVS and ICP on 2-3
Squid machines. No need for a L4/L7 switch.Make sure you use Squid in
interception mode.
LVS is in a sense a L4 switch.
Regards
Henrik
signature.asc
On fre, 2008-07-18 at 23:22 -0700, ananttickoo wrote:
sory boss but i am not able to find the error in my coniguration please
help
For authentication to work the browser must be configured to use the
proxy. Transparent interception and authentication CAN NOT be combined.
Additionally the
Henrik Nordstrom-5 wrote:
On fre, 2008-07-18 at 23:22 -0700, ananttickoo wrote:
sory boss but i am not able to find the error in my coniguration please
help
For authentication to work the browser must be configured to use the
proxy. Transparent interception and authentication CAN
It's pretty easy to grab the URL of the logo and configure jesred to
replace it with a URL pointing to your own logo. However, that's no
guarantee that Google won't change their logo URL at any time - at
which point your rewrite will break until you fix your rule to match.
-C
On Jul 17,
You should talk to whoever looks after jesred.
But basically, you want to write a URL rewrite helper which does something like:
#!/usr/bin/perl -w
use strict
# I think this means line-buffered .. :)
$| = 1;
while () {
Dear all
i have two squid proxy server in different machine.
the two squid proxy are dns round robin for redundancy.
i think to setup two squid proxy server as another one to be
cache-peer sibling.
squid.conf like this
server-A (2.6-Stable20)
On Sat, Jul 19, 2008 at 09:24:22PM +0800, Adrian Chadd wrote:
You should talk to whoever looks after jesred.
For jesred, you add a rule that looks like:
regex ^http://www\.google\.com/intl/en_ALL/images/logo\.gif$
http://www.yoursite.com/image.gif
or if you want to be fancy and catch all
On lör, 2008-07-19 at 23:03 +0800, Eric.chen wrote:
but , i see some error msg in cache.log , two server same problem.
WARNING: Forwarding loop detected for:
.
2008/07/19 07:02:02| WARNING: Forwarding loop detected for:
Client: 192.168.xx.xxx http_port: 192.168.xx.xxx:8080
GET
I want squid to not NAT my user IP address. I want my user IP same at exit
from squid . Possible ?
My setup is User --- Squid --- Firewall (Nat) Router Internet
Regards
Munawar Zeeshan (zmunawar) escreveu:
I want squid to not NAT my user IP address. I want my user IP same at
exit from squid . Possible ?
My setup is User --- Squid --- Firewall (Nat) Router
Internet
possible, but not that trivial as you would probably want to.
google for
I was reading up on this, at the squid site:
http://http://wiki.squid-cache.org/SquidFaq/ToomanyMisses Way Too Many Cache
Misses
And I was wondering where to save that script to. And what filename/format?
--
View this message in context:
I agree. But we have infrastructure problems that really push
hard to make it a single ip. We'll be doing WCCP and standard
proxy. But a large number of the clients have hardcoded proxy
ips and make it prohibitive to change it to a new address.
So you have two options:
- setup this hardcoded
Dear List
At my workplace I get Internet through a proxy server on a single IP
address. Now I want to share the Internet connection with few of my
colleagues. So I installed Squid on my Suse 10.3 machine. Since there
are two proxy servers involved do I need to do proxy chaining. Please
guide. In
15 matches
Mail list logo
