Fantastic! I will try this in the morning! Thanks Chris! This is exactly
what I was looking for!
- Original Message
From: chris brain <[EMAIL PROTECTED]>
To: squid-users@squid-cache.org
Sent: Thursday, August 21, 2008 10:26:15 PM
Subject: Re: [squid-users] if this is posted somewher
can you give the the iptables rule ?
:(
On Fri, Aug 22, 2008 at 10:50 AM, Michael Alger <[EMAIL PROTECTED]> wrote:
> On Fri, Aug 22, 2008 at 10:07:53AM +0700, ? z??up?? ??z??
> ? wrote:
>> ## Forward port 80 ke mail server
>> /sbin/iptables -t nat -A PREROUTING -p tcp
On Fri, Aug 22, 2008 at 10:07:53AM +0700, ? z??up?? ??z??
? wrote:
> ## Forward port 80 ke mail server
> /sbin/iptables -t nat -A PREROUTING -p tcp -i eth0 -d 202.169.51.119
>--dport 80 -j DNAT --to-destination 172.16.0.2
This looks like you're redirect
Hi From my experience with NTLM and AD this is the best way we found to
implement group membership :
ntlm_auth already has a mechanism to provide this its just that the doco is
difficult to follow.
squid.conf :
auth_param basic program
/usr/bin/ntlm_auth --helper-protocol=squid-2.5-basic
--r
>> On tis, 2008-07-22 at 23:37 +1200, Amos Jeffries wrote:
>>
>> Only one issue has come up: under sibling relationships, squids method
>> of
>> relaying requests to sibling is slightly bad and may break the proper
>> expected
>> behavior. All other setups should be fine.
>>
>>
>>> Also seen in par
hello
i have problem
please see h++p://amyhost[dot]com/data/1.jpg
and this is my squid conf...
-start---
#logformat squid %>a [%tl] "%rm %ru HTTP/%rv" %Hs % /proc/sys/net/ipv4/ip_forward
/etc/init.d/networking restart
#-
# eth0 =
> hello I want to enable authentication digest.
> recently I configured I installed and executed squid3.0STABLE8 with these
> parameters:
> . / it
> configures--prefix=/usr--localstatedir=/var--with-default-user=proxy--sysconfdir=/etc/squid--datadir=${prefix}/share/squid--libexecdir=${prefix}/lib/s
> Hello, Leonardo.
>
> Thanks for your prompt reply!
>
> On 8/21/08 3:02 PM, "Leonardo Rodrigues Magalhães"
> <[EMAIL PROTECTED]> wrote:
>> are you sure you wanna do this kind of configuration ???
> Yes. I am aware that my request is unusual, as this is to be a
> special-purpose installation of
> Hi,
>
>I'm using Squidguard to manage users,groups and acl's of my proxy
> server but I have a problem: When I put ".com" on my expressionlist of
> blocks, "gmail.com" is blocked too...
>
> My expressionlis file is
> "(.*)?(\.com(\?.*)?$|\.zip(\?.*)?$|message|messages)(.*)?"
>
>
> Anyone
chown squid.squid /mnt/cache2
and
Disable Selinux works for me
Sorry i forget to tell I use RHEL 5
Thanks you for your reply
On Thu, Aug 21, 2008 at 4:25 AM, John Doe <[EMAIL PROTECTED]> wrote:
>> My problem is i dont know how to mount /mnt/cache2 as squid user
>> If i can mount /mnt/cache2 as s
Hello, Leonardo.
Thanks for your prompt reply!
On 8/21/08 3:02 PM, "Leonardo Rodrigues Magalhães"
<[EMAIL PROTECTED]> wrote:
> are you sure you wanna do this kind of configuration ???
Yes. I am aware that my request is unusual, as this is to be a
special-purpose installation of squid.
> have
hello I want to enable authentication digest.
recently I configured I installed and executed squid3.0STABLE8 with these
parameters:
. / it
configures--prefix=/usr--localstatedir=/var--with-default-user=proxy--sysconfdir=/etc/squid--datadir=${prefix}/share/squid--libexecdir=${prefix}/lib/squid--e
> On tis, 2008-07-22 at 23:37 +1200, Amos Jeffries wrote:
>
> Only one issue has come up: under sibling relationships, squids method of
> relaying requests to sibling is slightly bad and may break the proper expected
> behavior. All other setups should be fine.
>
>
>> Also seen in parent relations.
Benton Roberts escreveu:
Dear Squid-masters,
I would like to configure Squid so that it always serves the "latest
available" version of any given URL, even if the URL is no longer available
at the original server. In this way, Squid's clients would never receive an
error for a given URL, as lo
Dear Squid-masters,
I would like to configure Squid so that it always serves the "latest
available" version of any given URL, even if the URL is no longer available
at the original server. In this way, Squid's clients would never receive an
error for a given URL, as long as that URL had been avail
Vikram Goyal wrote:
Hello,
I am new to squid. Could you guide exactly which settings should be
tweaked and what values should be appropriate.
I am using squid-3.0.STABLE7-1.fc9.i386
Thanks!
For a start, see
http://wiki.squid-cache.org/KnowledgeBase/PerformanceAnalysis:
and
http://wiki.
Hi,
I'm using Squidguard to manage users,groups and acl's of my proxy server but
I have a problem: When I put ".com" on my expressionlist of blocks, "gmail.com"
is blocked too...
My expressionlis file is
"(.*)?(\.com(\?.*)?$|\.zip(\?.*)?$|message|messages)(.*)?"
Anyone knows what is t
> My problem is i dont know how to mount /mnt/cache2 as squid user
> If i can mount /mnt/cache2 as squid, the problem should be OK
> My cache_effective_user is squid and cache_effective_group also squid
Once /mnt/cache2 is mounted, do
chown squid:squid /mnt/cache2
JD
I add anohter disk for cache
here is what i have done
1. mkfs.ext3 /dev/sda1
2. add the following line to /etc/fstab
/dev/sda1 /mnt/cache2 ext3defaults1 2
3. add the following to /etc/squid/squid.conf
cache_dir ufs /mnt/cache2 27 16 256
4. squid -z
Sorry Henrik, think I just sent this reply back to you.. not the whole group..
Great.. thanks,
Just to clarify, to use wbinfo_group.pl, I need to:
1. Add Domain Local group to Active Directory called Internet-Allowed (name
not important)
2. Add 'external_acl_type ADS %LOGIN /usr/lib/squid/wbi
I dont understand what you want
pls tell me exactly what you want...
On 8/21/08, Vikram Goyal <[EMAIL PROTECTED]> wrote:
> On Tue, Aug 19, 2008 at 03:04:48PM +0200, Matus UHLAR - fantomas wrote:
>> On 18.08.08 23:10, Mr Crack wrote:
>> > Subject: [squid-users] how to force to refresh when at offl
On Tue, Aug 19, 2008 at 03:04:48PM +0200, Matus UHLAR - fantomas wrote:
> On 18.08.08 23:10, Mr Crack wrote:
> > Subject: [squid-users] how to force to refresh when at offline_mode is on
> >
> > when offline_mode is off, it becomes slow
> > when offline_mode is on, old webpages comes out from cach
bijayant kumar wrote:
Hello to lists,
I was meeting a consultant to an ISP today who plans to implement a caching
solution for his network. I guess they are already impressed with Blue Coats
which undoubtedly seems to be a very good product which I have not used or seen
physically.
Being a s
Hello to lists,
I was meeting a consultant to an ISP today who plans to implement a caching
solution for his network. I guess they are already impressed with Blue Coats
which undoubtedly seems to be a very good product which I have not used or seen
physically.
Being a staunch believer of Open
Henrik Nordstrom wrote:
On ons, 2008-08-20 at 14:00 +0800, Adrian Chadd wrote:
Run the latest Squid-3.0 ; PRE5 is old and buggy.
Shout at the debian distribution for shipping such an old version.
Nor only old & buggy, also not a stable release for production use only
a pre-release for early a
On 21.08.08 10:37, Mr Crack wrote:
> If offline_mode is disable, connection is slow but Ok
> To speed up connection speed, I enable offline_mode and connection is fast.
> But after 3 days, the following error occurs when accessing some sites...
I guess those pages have expired and squid doesn't pr
On 21.08.08 00:30, [EMAIL PROTECTED] wrote:
> i know that ftps is not "usual" , by the way if someone have experience
> about proxying ftps with squid or can explain why we can't do it , thx for
> your answers
proxying FTPS, as long as any ssl-encrypted protocol, has not much usage.
You only can c
Mario Almeida wrote:
Hi,
After adding the below option
always_direct allow all
prevent peer being used?
An error there is kind of expected if the peer is not listening on port
80 for web traffic.
Amos
I get a different error
The following error was encountered:
* Connection to 172
Further to my request yesterday... I would prefer to be able to just generate
the md5 hash manually, rather than writing code to use storeKeyPublic() in
src/store_key_md5.c. However, I must not be interpreting that function
correctly as my hashes do not match the hashes produced in store.log:
> Generally one should use the concurrency=
> children=when making your own helper. You only need
> a lot of children if your helper may block for extended periods of time
> for example performing DNS lookups..
I just want to be sure that, in case of a traffic spike, there are no
connections deni
30 matches
Mail list logo
