Sameer Shinde wrote:
Dear All,
I've installed squid 2.6 installed on my ubuntu8.0.4 server. I'm getting errors like attached one frequently.
It says, Unable to determine the IP address from host name anything, but after some time say even after 5 mins the same
page / site opens. I'm not able
Marcello Romani wrote:
Amos Jeffries ha scritto:
Ressa wrote:
Hi,
I was wondering can I made the squid log their activities to the
database server (such as MySQL or something) and is there any tools
can provide information from those database.
Thanks
't would be a rarity. Especially as
I just upgraded on FC9, 2.6.26.6-79.fc9.i686 to
squid-3.0.STABLE10-1.fc9.i386 this very morning (can't remember what
version it was from - just whatever went before I suppose). Once I'd
done this, Squid refused to start, throwing up with a:
FATAL: Cannot open 'on' for writing.
The parent
Dear Amos,
Thanks for the reply.
We are using the same DNS servers for our existing proxy server which is
ISA2000 is working properly without any problems.
We want to shift from MS-ISA2000 proxy server to Linux Squid proxy server, so
we are building up this new proxy server.
More over if I
Clear the cache, may be the source for your problem. I had this problem
whit another URL and I had resolved doing this.
Bye, Mariel
Sameer Shinde wrote:
Dear Amos,
Thanks for the reply.
We are using the same DNS servers for our existing proxy server which is ISA2000 is working properly
Callum wrote:
I just upgraded on FC9, 2.6.26.6-79.fc9.i686 to
squid-3.0.STABLE10-1.fc9.i386 this very morning (can't remember what
version it was from - just whatever went before I suppose). Once I'd
done this, Squid refused to start, throwing up with a:
FATAL: Cannot open 'on' for writing.
Are you using /etc/resolve.conf or dns_nameservers in squid.conf
if /etc/resolve.conf used how may entry are there i mean the number of
name servers
Do the following
eg:
If you have 3
nameserver 10.0.0.1
nameserver 10.0.0.2
nameserver 10.0.0.3
comment out one by one and run
time host
Amos Jeffries ha scritto:
Marcello Romani wrote:
Amos Jeffries ha scritto:
Ressa wrote:
Hi,
I was wondering can I made the squid log their activities to the
database server (such as MySQL or something) and is there any tools
can provide information from those database.
Thanks
't would
Dear Mariel,
This is not happening about any particular site. This can happening with any
site
in next 3-5mins time the same site/web page works properly.
~~~
Thanks Regards,
Sameer Shinde.
Sr. Customer Support Engineer,
Email:- [EMAIL PROTECTED]
M:- +91 98204 61580
Remy,
I'm using /etc/resolv.conf file have two entries in it.
like
nameserver 10.0.0.1
nameserver 10.0.0.2
tried to check the time host which is somewhere in the range of 48-50, which
seems reasonably o.k.
I'm also using the default cache size, which I want to increase to some extend.
But
Date: Fri, 28 Nov 2008 16:08:32 +1300
Matus UHLAR - fantomas wrote:
On 26.11.08 10:57, [EMAIL PROTECTED] wrote:
Please set up your mailer to wrap lines below 80 characters per line.
How's this?
I have a proxy-to-proxy setup (without ICP) and it is working wonderfully
with the
Hi All
Today I downloaded squid-3.1.0.2.tar.bz2 from
http://www.squid-cache.org/Download/ and then followed the following
instructions.
1. tar-jxvf squid-3.1.0.2.tar.bz2
2. cd squid-3.1.0.2
3. ./configure --enable-storeio=aufs,coss,diskd,null,ufs --enable-snmp
4. make gives an error. It doesn't
Read the release notes for 3.x, you'll see that --enable-snmp is no
longer a valid configure option as it's built by default (use
--disable-snmp if you don't want it)
Once you configure, your next step is to 'make all', followed by 'make
install'
HTH
-Original Message-
From: Saurabh
tis 2008-12-02 klockan 01:24 +1300 skrev Amos Jeffries:
Thanks. Yes it was the log lines.
Those two are now expecting the filenames to log to not just on/off toggles.
emulate_httpd_log is still and on/off since it only affects the
access_log files. You may need to keep it unchanged for any
mån 2008-12-01 klockan 17:13 +1000 skrev Jonathan Hunt:
Hi,
I am running Squid on my work computer and using it at remotely. What
I am wanting to do is be able to use journal remotely that my
university has a site-license for (when I am traveling).
I've set up options
via off
and
Dear Mariel,
This is not happening about any particular site. This can happening with
any site
in next 3-5mins time the same site/web page works properly.
Just a thought.
Check that negative_ttl is set to 0 seconds (default when unset on older
squid was 5 minutes which is suspiciously
Read the release notes for 3.x, you'll see that --enable-snmp is no
longer a valid configure option as it's built by default (use
--disable-snmp if you don't want it)
Once you configure, your next step is to 'make all', followed by 'make
install'
HTH
The null store type is also obsoleted
Hi,
On Sun, 23 Nov 2008, Amos Jeffries wrote:
Chris Robertson wrote:
Al - Image Hosting Services wrote:
I hope that someone can help me. I have 3 servers running squid acting as
a web accelerator for a single http server. I have been having a large
amount of problems with the http server
Hi,
On Sun, 23 Nov 2008, Amos Jeffries wrote:
Chris Robertson wrote:
Al - Image Hosting Services wrote:
I hope that someone can help me. I have 3 servers running squid acting
as
a web accelerator for a single http server. I have been having a large
amount of problems with the http server
Hi Henrik,
Thanks for answer.
Your method doesn't help...
I do not restrict my customers anywhere on the network.
Traffic increases after I shift traffic through squid.
From router to Squid:
30 second input rate 198 bits/sec, 399 packets/sec
From Squid to router:
30 second output rate
Kindly advise what does the following means:
HTTP all service time
HTTP miss service time
HTTP near miss service time
HTTP hit service time
Thank you.
_
Easily publish your photos to your Spaces with Photo Gallery.
Alexey Kovrizhnykh wrote:
Hi Henrik,
Thanks for answer.
Your method doesn't help...
I do not restrict my customers anywhere on the network.
quick_abort_* and range-offset_* settings have nothing to do with access
restriction in the network.
They prevent squid from pre/post-fetching more
squid squid wrote:
Kindly advise what does the following means:
time (maybe average) to provide clients with their requested data for
HTTP all service time
all request. (total)
HTTP miss service time
... when it was fetched from Internet.
HTTP near miss service time
...
Hi Amos,
I meant I do not restrict my customers' bandwidth anywhere.
I already added Henrik's suggestions to config. But still i get
traffic increase.
Right now I am running squid-3.0.STABLE10.
My topology is:
Clients-router-Internet
|
Squid
And i get increase on a
Any update on how this testing has gone?
Henrik Nordstrom wrote:
3.1 is certainly ready for testing. That's why we started making beta
releases (3.1.0.X).
Please give it a try and report back your findings. I don't think this
is a setup that is commonly tested so it's very good if you can
Thanks Gregori and Amoss
Yes I was able to move ahead after following your suggestions. I had to
do one more modification to the option I passed to configure script
I had to remove the coss and null store io options so that the code
could compile. I got error saying coss is not stable at this
Thank you for the reply. If MRTG graph show the following:
Median Svc Time (5 min) 358.0ms (Max) 55.0ms (Average) 19.0ms (Current)
Does it mean that the squid proxy server is responding to each users' request
at 19ms per request for current and on average of 55ms per request???
Pls also
Amos,
The negative_ttl was set to Defaults, which I've now set to 0.
The negative_dns_ttl is unset ( as a Default), so I've not made any changes in
this.
Let's see if this works.
Also check that they are actually being generated by your own squid, your
didn't understand this...?
upstream
Just to update you all,
I've updated from squid2.6 to squid3.0 stable1. which I could get on Ubuntu
site.
Now checking for the errors, system under observation.
~~~
Thanks Regards,
Sameer Shinde.
Sr. Customer Support Engineer,
Email:- [EMAIL PROTECTED]
M:- +91 98204 61580
Even though, I update to squid3 I'm still facing the same problem.
~~~
Thanks Regards,
Sameer Shinde.
Sr. Customer Support Engineer,
Email:- [EMAIL PROTECTED]
M:- +91 98204 61580
http://www.geocities.com/s9sameer
If everyone is thinking alike, then somebody isn't thinking.
30 matches
Mail list logo
