Avinash Rao wrote:
Dear all,
I am new here and i would like to know the correct procedure for
compiling squid to integrate with samba.
I am doing this on a Ubuntu 8.04 Server 64-bit edition and i have all
the updates installed. Infact, i have installed samba through apt-get
install and is config
Dear all,
I am new here and i would like to know the correct procedure for
compiling squid to integrate with samba.
I am doing this on a Ubuntu 8.04 Server 64-bit edition and i have all
the updates installed. Infact, i have installed samba through apt-get
install and is configured as a PDC.
dpkg
Guido Serassio wrote:
Hi Amos,
At 14.25 16/08/2009, Amos Jeffries wrote:
CC'ing to squi-dev. This really should be over there.
Maybe Guido can help.
Probably the solution is not simple.
As you know, the development of Squid 3 is stopped since April 2008
after the bazaar migration.
This me
J Webster wrote:
If you use proxy authentication and the 'max_user_ip' ACL,
this directive controls how long Squid remembers the IP
addresses associated with each user. Use a small value
(e.g., 60 seconds) if your users might change addresses
quickly, as is the case with dialups. You might be
Kelly Jones wrote:
On 8/13/09, Amos Jeffries wrote:
> Kelly Jones wrote:
I use squid, and want to add HTTP headers to all GET/POST requests I
make, above/beyond the headers my browser + squid already send.
Can squid do this?
Please explain why. Then we can point you at the right possible so
pa...@arcor.de wrote:
- Original Nachricht
Von: J Webster
An: squid-users@squid-cache.org
Datum: 17.08.2009 01:26
Betreff: [squid-users] default settings in the manual
It seems there are a lot of settings in the conf that are commented out,
does this mean they are not be
- Original Nachricht
Von: J Webster
An: squid-users@squid-cache.org
Datum: 17.08.2009 01:26
Betreff: [squid-users] default settings in the manual
> It seems there are a lot of settings in the conf that are commented out,
> does this mean they are not being used or default
When something in the manual says it has a default setting, eg
Configuration Details:
Option Name:cache_mem
Replaces:Requires:
Default Value: cache_mem 256 MB
Suggested Config
Does this mean that squid will operate with this value even when the line is
commented out in the squid.conf ?
It s
If you use proxy authentication and the 'max_user_ip' ACL,
this directive controls how long Squid remembers the IP
addresses associated with each user. Use a small value
(e.g., 60 seconds) if your users might change addresses
quickly, as is the case with dialups. You might be safe
using a large
Hi Amos,
At 14.25 16/08/2009, Amos Jeffries wrote:
CC'ing to squi-dev. This really should be over there.
Maybe Guido can help.
Probably the solution is not simple.
As you know, the development of Squid 3 is stopped since April 2008
after the bazaar migration.
This means that ALL subsequent
mån 2009-08-10 klockan 10:40 +0200 skrev Olivier Sannier:
> > Indeed.. and didn't I write such a script some many years ago? Or was it
> > someone else who posted one.. don't remember.
> >
> Well, I must not have used the proper search terms then. Would you have
> any clues as to what I shoul
fre 2009-08-07 klockan 13:12 +0200 skrev Matus UHLAR - fantomas:
> fixing in what way? to cache objects from disk in squid's memory in addition
> to disk cache?
Yes.
Regards
Henrik
tor 2009-08-06 klockan 08:23 -0700 skrev Thibaut_:
> And sometimes, after a few unsucessfull tries, the site will just magically
> work and no TCP_MISS/500 is returned...
What do the returned error page say?
Note: If using MSIE then you need to go into internet options and
disable "Show friendly
sön 2009-08-16 klockan 02:13 +0100 skrev J Webster:
> Does auth_param basic credentials_ttl have to be set in conjunction with
> authenticate_cache_garbage_interval?
You can ignore the garbage_interval one. It's a memory usage tuning
option, with no visible operational effect.
Regards
Henrik
sön 2009-08-16 klockan 11:43 -0400 skrev fulan Peng:
> You may say, why do not make a Squid SSL reverse proxy Server <-->
> Another Squid SSL reverse proxy server. But as I know, Squid cannot do
> this.
Sure it can. a SSL reverse proxy is just like any other webserver.
i.e. something like the fo
On 8/13/09, Amos Jeffries wrote:
> Kelly Jones wrote:
>> I use squid, and want to add HTTP headers to all GET/POST requests I
>> make, above/beyond the headers my browser + squid already send.
>>
>> Can squid do this?
>>
>
> Please explain why. Then we can point you at the right possible solution
Hi, Squid users!
I know how to set up Squid proxy server and SSH tunnel for another
computer which has access to the Squid server. After that, I have to
set up my browser in proxy mode. I do not want this. I do not want to
set up my browser. I want to access some specific site as normal, say,
http
* Sachin Malave :
> Please provide documentation on accelerator mode in SQUID.
YOu do know how to use google?
http://wiki.squid-cache.org/SquidFaq/ReverseProxy
Please provide documentation on accelerator mode in SQUID.
--
Regards
Sachin Malave
The pipelining used by speedtest.net and such won't really get a
benefit from the current squid pipelining support.
Adrian
2009/8/15 Daniel :
> Henrik,
>
> I added 'pipeline_prefetch on' to my squid.conf and it still isn't
> working right. I've pasted my entire squid.conf below, if you
Thanks Amos,
My C is extremely rusty so I appreciate your assistance!.
Applied patch, results are below:
2009/08/16 22:51:27.471| command-line -X overrides: ALL,7
2009/08/16 22:51:27.471| signal: sig=31 func=sigusr2_handle: (0) No error
2009/08/16 22:51:27.471| CacheManager::registerAction: regi
CC'ing to squi-dev. This really should be over there.
Maybe Guido can help.
Nevil Thatcher wrote:
I have attempted this on 2 Widows PC's the First (work) Windows XP and at hoem
Windows 7
Using squid -X I get the following output
C:\squid\sbin>squid -X
2009/08/16 20:18:11.683| command-line -X
I have attempted this on 2 Widows PC's the First (work) Windows XP and at hoem
Windows 7
Using squid -X I get the following output
C:\squid\sbin>squid -X
2009/08/16 20:18:11.683| command-line -X overrides: ALL,7
2009/08/16 20:18:11.683| signal: sig=31 func=sigusr2_handle: (0) No error
2009/08/16
Hi,
I have Squid running on a Ubuntu-server in Holland and stream video to
my home in Japan. The streaming works fine for about a minute but then
my image freezes, while the sound goes on just fine. Is this a
familiar problem? Are there any settings in Squid for streaming video
that I can use to o
24 matches
Mail list logo
