- Original Message -
From: "Amos Jeffries"
To: "wangwen"
Cc:
Sent: Tuesday, September 29, 2009 12:51 PM
Subject: Re: [squid-users] squid vport
Thanks for your help!
I think it should have been: "Host: 192.168.0.164:88" maybe something went
wrong and caused defaultsite to be used.
Thanks for your help!
I think it should have been: "Host: 192.168.0.164:88" maybe something went
wrong and caused defaultsite to be used. Henrik might know.
Sorry, I made a mistake. Host is the 192.168.24.198:88.
So Squid check the URL. Finds /rdims/index.jsp.
... checks the Host: header. F
wangwen wrote:
- Original Message - From: "Amos Jeffries"
To: "wangwen"
Cc:
Sent: Tuesday, September 29, 2009 12:51 PM
Subject: Re: [squid-users] squid vport
Thanks for your help!
I think it should have been: "Host: 192.168.0.164:88" maybe something
went
wrong and caused defaultsi
Hi All,
I have been regenerating the build patch file for squid2.7.STABLE7 to
reflect the new Makefile.in and am you have introduced after
squid.2.7-STABLE5. Most of build patch is working out fine it is failing at
2 places in the patch. 1st place errors/Makefile.in only in the Hunk section
where
Hi there,
Why not make use of some of your RAM for cache_mem? It will make requests
for smaller, more frequently requested files a hell of a lot quicker, and it
should give you a better hit ratio.
# 3GB process size limit in 32bit, so don't set higher than 1 GB for a very
busy cache
cache_mem 51
Hello all,
I'm running several Squid boxes as reverse proxies, the problem i'm seeing
is when there are a high number of connections in the region of 80,000 per
Squid at peak I'm getting 1,000's of TCP_MISS for the same URL hitting the
back end servers, things do eventually sort themselves out. I
On Fri, Sep 18, 2009 at 7:52 PM, Amos Jeffries wrote:
> Avinash Rao wrote:
>>
>>
>> On Wed, Sep 16, 2009 at 7:04 PM, Henrik Nordstrom
>> mailto:hen...@henriknordstrom.net>> wrote:
>>
>> ons 2009-09-16 klockan 18:02 +0530 skrev Avinash Rao:
>> > 3) how do i use truss, not found on my machine
tis 2009-09-29 klockan 17:09 +0530 skrev Avinash Rao:
> My sincere apologies for the late reply.
> Squid stops responding everyday. I had enabled debug_options ALL,9 and
> the cache.log file is huge.. which part of it do you want?
The information around where it stops responding.
> strace gives
Anybody can help?
The squid proxy is configured as a transparent proxy.
Other errors:
in access.log
1254223081.196501 94.x.x.x TCP_MISS/302 1059 GET
http://profile.live.com/connect/?wa=wsignin1.0&sa=319007920 -
DIRECT/64.4.24.246 text/html
and the same request, in cache.log
2009/09/29 13
Dear all,
I am using squid 2.6 stable18 on Ubuntu 8.04 server - 64-bit edition.
I noticed a strange problem with squid recently, yahoo.com page
doesn't load completely through squid proxy.
In the sense that, all graphics are missing and only text is displayed.
squid.conf
visible_hostname server
h
They are caused by bad data received from a client browser. There is
nothing Squid can do about it. Either in the current dying request or
appended to an earlier request and not caught at that time (rare)
What squid is logging to cache.log is the start of the request. ** from
the very first le
> -Original Message-
> From: Chris Robertson [mailto:crobert...@gci.net]
> Sent: Monday, September 28, 2009 4:16 PM
> To: squid-users@squid-cache.org
> Subject: Re: [squid-users] SSL Reverse Proxy testing With Invalid
> Certificate, can it be done.
>
> Dean Weimer wrote:
> > I am trying to
> "accel vhost defaultsite=192.168.24.198 vport=8080" means ...
>
> ... 'accelerate' the URL.
> ... (vhost) use client-given Host: header when available.
> ... (vport=) use the client-given Host: HTTP port (default 8088 if none
> found).
> ... (defaultsite=) use 192.168.24.198 if neither of the abo
- Original Message -
From: "Michael Lenaghan"
To: "Amos Jeffries"
Cc: "wangwen" ;
Sent: Tuesday, September 29, 2009 9:30 PM
Subject: Re: [squid-users] squid vport
"accel vhost defaultsite=192.168.24.198 vport=8080" means ...
... 'accelerate' the URL.
... (vhost) use client-given
> Ref:
> http://www.squid-cache.org/Versions/v2/2.7/changesets/12051.patch
> http://bugs.squid-cache.org/show_bug.cgi?id=2192
> (comment 4 and 5 describes the options and how they work now).
Thanks, passed that on.
> Notes about a 3.x upgrade inline as well...
>
>> # Cache Peer Access
>> acl all
Michael Lenaghan wrote:
"accel vhost defaultsite=192.168.24.198 vport=8080" means ...
... 'accelerate' the URL.
... (vhost) use client-given Host: header when available.
... (vport=) use the client-given Host: HTTP port (default 8088 if none
found).
... (defaultsite=) use 192.168.24.198 if neith
The file is too huge, the email bounced back, I am pasting few records
which has different entries.
2009/09/29 16:43:02| statHistCopy: Dest=0x85baa8, Orig=0x86fd68
2009/09/29 16:43:02| statHistCopy: capacity 300 300
2009/09/29 16:43:02| statHistCopy: min 0.00 0.00
2009/09/29 16:43:02| sta
Hello together,
Is there any possiblity to realize a round robin scheduling for requests
sent to ICAP services? Goal is to forward each HTTP request to the next
available ICAP service due to load balancing issues.
As far as i read the configuration manual, there is no option to to
this. Can this b
Apologies for what is probably a newbie question. I've searched the
squid directives, archives of this list, the net, etc., and haven't
discovered, or didn't recognize, the answer.
I'm using squid 2.7.STABLE6 in accelerator mode. I used the basic
accelerator config example at:
http://wiki.squid
Hi Amos,
thanks for your reply.
I've found the right entries in access.log, corresponding to the error in
cache.log:
Tue Sep 29 13:18:01 2009501 94.84.179.2 TCP_MISS/302 1059 GET
http://profile.live.com/connect/?wa=wsignin1.0&sa=319007920 -
DIRECT/64.4.24.246 text/html
Tue Sep 29 13:18:04 2
: For a bit of leverage; every time the config changes squid needs to be
: reconfigured, which causes a short outage.
:
: I've been thinking about it, and the multiple-IPs for a cache_peer might
: work when a DNS name is entered as first parameter of cache_peer. But only
: the IPs detected at sta
: Another solution could be to use a multi-level CARP config, which incidentally
: scales far better horizontally than ICP/HTCP, as it eliminates the iterative
: "sideways" queries altogether by hashing URLs to parent cache_peers. In this
...
: different IP or TCP port that actually does t
Thanks for all of the great replies. There is lots of information to digest.
I appreciate all of the suggestions.
But, Before I got any of these replies, I went ahead and made modifications
to my squid.conf to match an example I found on the internet here is my
current running squid.conf
http_po
Has anyone put Kerberos authentication into the MacPort of Squid? If so,
would you care to share how you did it?
If not, has anyone recompiled Squid with authentication, and how did you
do that?
Thanks,
Ron
ant2ne wrote:
>
> Thanks for all of the great replies. There is lots of information to
> digest. I appreciate all of the suggestions.
>
> But, Before I got any of these replies, I went ahead and made
> modifications to my squid.conf to match an example I found on the internet
> here is my curre
Roger Cornelius wrote:
>
> Apologies for what is probably a newbie question. I've searched the
> squid directives, archives of this list, the net, etc., and haven't
> discovered, or didn't recognize, the answer.
>
> I'm using squid 2.7.STABLE6 in accelerator mode. I used the basic
> accelera
Hi All,
Ok so I have located and solved the problem with the 2nd part of the rpm
Build patch which was producing the 2nd errors on the src/Makefile.in in the
email down. I still only have the 1st error which is produced when patching
/errors/Makefile.in whereby I change only errordir and DEFAULT_E
: > What would be really nice is a command line option and a bit of code
: > in the cache peer setup that recognizes own IP and ignores the entry,
: > to make this problem just all go away...
That would be awesome, but if i'm understanding you correctly it would
only address the "talking to myse
THANKS!!!
With those changes I'm looking at...
http_port 3128
no_cache deny QUERY
cache_mem 512 MB
maximum_object_size_in_memory 2048 KB
maximum_object_size 1 GB
cache_dir ufs /cache 50 256 256
redirect_rewrites_host_header off
cache_replacement_policy lru
acl QUERY urlpath_regex cgi-bin \
Ooops, I need "acl QUERY urlpath_regex cgi-bin \?" before "no_cache deny
QUERY"
--
View this message in context:
http://www.nabble.com/not-caching-enough-tp25530445p25670155.html
Sent from the Squid - Users mailing list archive at Nabble.com.
Amos,
Months later (sorry...) - many thanks for your explanations. I used it when
needed to correct incoherent parameters, and Squid is now fully functionnal
on my network.
Thanks again.
DaNifty
Amos Jeffries-2 wrote:
>
> On Tue, 21 Jul 2009 07:16:36 -0700 (PDT), danifty
> wrote:
>> Hi all
Chris Hostetter wrote:
>
>
> : > What would be really nice is a command line option and a bit of code
> : > in the cache peer setup that recognizes own IP and ignores the entry,
> : > to make this problem just all go away...
>
> That would be awesome, but if i'm understanding you correctly it
On Tue, 29 Sep 2009 10:54:05 -0400, Roger Cornelius
wrote:
> Apologies for what is probably a newbie question. I've searched the
> squid directives, archives of this list, the net, etc., and haven't
> discovered, or didn't recognize, the answer.
>
> I'm using squid 2.7.STABLE6 in accelerator mod
On Tue, 29 Sep 2009 12:59:52 -0700 (PDT), Chris Hostetter
wrote:
> : > What would be really nice is a command line option and a bit of code
> : > in the cache peer setup that recognizes own IP and ignores the entry,
> : > to make this problem just all go away...
>
> That would be awesome, but if
On Tue, 29 Sep 2009 11:41:16 -0700 (PDT), ant2ne
wrote:
> Thanks for all of the great replies. There is lots of information to
> digest.
> I appreciate all of the suggestions.
>
> But, Before I got any of these replies, I went ahead and made
modifications
> to my squid.conf to match an example I
I'm wondering if you are following basic 'how to update a patch' method?
* locate original upstream file.
* make a backup copy
* apply pre-existing patch
* for each rejected hunk manually edit the patched file (not the patch
itself!)
* diff -u the altered file and backup of original.
* save resul
Hi All.
I have my question about the use of “acl port ” in squid.conf.
Generally the proxy has the following three cases:
1. Standard proxy cache server: In order to realize this approach, We must
indicate the Ip and port of proxy server in the browser of everyone internal
host.
2. Transparent
Now I use Stable Squid 2.7.STABLE7 in windows xp.
alter HTTP_Port as follow:
http_port 192.168.0.164:88 accel defaultsite=192.168.24.198
or http_port 192.168.0.164:88 accel defaultsite=192.168.24.198 vport
acl all src 0.0.0.0/0.0.0.0
http_access allow all
cache_peer 192.168.24.198 parent 8088 0
I've been using squid_ldap_auth (Squid 2.7, SLES 11) for basic authentication,
and it wasn't terribly difficult to set up. What concerns me is the passing of
credentials from the browser to Squid in plain text. When we use basic
authentication anywhere else, the web site usually requires HTTPS.
On Wed, 30 Sep 2009 09:46:04 +0800, "wangwen" wrote:
> Hi All.
>
> I have my question about the use of “acl port ” in squid.conf.
>
> Generally the proxy has the following three cases:
>
> 1. Standard proxy cache server: In order to realize this approach, We
must
> indicate the Ip and port of p
I have now built another Squid server based on 3.0 STABLE19 but am
experiencing the same results.
I can resolve all non-FQDN addresses perfectly (across our three internal
domains) from the server command line yet Squid refuses to query DNS based
on the multiple search domains specified in res
I got it,Thanks for your replies.
- Original Message -
From: "Amos Jeffries"
To: "wangwen"
Cc:
Sent: Wednesday, September 30, 2009 10:29 AM
Subject: Re: [squid-users] Squid "acl port"
On Wed, 30 Sep 2009 09:46:04 +0800, "wangwen" wrote:
Hi All.
I have my question about the us
wangwen wrote:
Now I use Stable Squid 2.7.STABLE7 in windows xp.
alter HTTP_Port as follow:
http_port 192.168.0.164:88 accel defaultsite=192.168.24.198
or http_port 192.168.0.164:88 accel defaultsite=192.168.24.198 vport
acl all src 0.0.0.0/0.0.0.0
http_access allow all
cache_peer 192.168.24.1
David,
You could use NTLM or kerberos auth to achieve the same.
This will also allow you to have single sign on to teh proxy.
Warm Regards
Tej
On Wed, Sep 30, 2009 at 7:58 AM, David Boyer wrote:
> I've been using squid_ldap_auth (Squid 2.7, SLES 11) for basic
> authentication, and it wasn't t
David Boyer wrote:
I've been using squid_ldap_auth (Squid 2.7, SLES 11) for basic
authentication, and it wasn't terribly difficult to set up. What
concerns me is the passing of credentials from the browser to Squid
in plain text. When we use basic authentication anywhere else, the
web site usuall
- Original Message -
From: "Amos Jeffries"
To: "wangwen"
Cc: "Michael Lenaghan" ;
Sent: Wednesday, September 30, 2009 12:59 PM
Subject: Re: [squid-users] squid vport
wangwen wrote:
Now I use Stable Squid 2.7.STABLE7 in windows xp.
alter HTTP_Port as follow:
http_port 192.168.0
dmor...@tycoflow.co.nz wrote:
I have now built another Squid server based on 3.0 STABLE19 but am
experiencing the same results.
I can resolve all non-FQDN addresses perfectly (across our three internal
domains) from the server command line yet Squid refuses to query DNS based
on the multiple
47 matches
Mail list logo