hello ppl;
is there a special way of compiling 64 squid; i dont see any configure options
for 64bit compile.
i have compiled it but it seems it is possibly causing kernel panic.
i m using squid 2.7stable6 , kernel 2.6.31.13 , 64bit debian lenny.
any help will be much appreciated.
On Tue, May 11, 2010 at 11:47 AM, sameer khan khanza...@hotmail.com wrote:
hello ppl;
is there a special way of compiling 64 squid; i dont see any configure
options for 64bit compile.
i have compiled it but it seems it is possibly causing kernel panic.
i m using squid 2.7stable6 , kernel
I also also using squid 2.7stable 6 on 64 bit but it causing kernel panic
regards
senthil
sameer khan wrote:
hello ppl;
is there a special way of compiling 64 squid; i dont see any configure options for 64bit compile.
i have compiled it but it seems it is possibly causing kernel panic.
On Tue, May 11, 2010 at 12:54 PM, senthilkumaar2021
senthilkumaar2...@gmail.com wrote:
I also also using squid 2.7stable 6 on 64 bit but it causing kernel panic
Now THIS is weird.
NOTHING in squid should be able to cause a kernel panic.
What are you running it on?
--
/kinkie
senthil what kernel are u using ? is it causing kernel panic after certain
memory usage ( i m guessing it is causing after 3.5GB memory)
thanks for reply
Date: Tue, 11 May 2010 16:24:03 +0530
From: senthilkumaar2...@gmail.com
To:
Hi,
Operating system is 64 bit.I tried kernel 2.6.28.5 and 2.6.30.5 .The
squid is running fine from morning till evening but during peak hours it
is causing kernel panic .I actually dono reason why this happens i tried
all possible ways. let me know your problem in detail so that it can
help
Em 11/05/2010 06:47, sameer khan escreveu:
is there a special way of compiling 64 squid; i dont see any configure options
for 64bit compile.
i have compiled it but it seems it is possibly causing kernel panic.
i m using squid 2.7stable6 , kernel 2.6.31.13 , 64bit debian lenny.
i'm
On Tue, May 11, 2010 at 1:35 PM, senthilkumaar2021
senthilkumaar2...@gmail.com wrote:
Thanks for the reply
I tried kernel 2.6.28.5 and 2.6.30.5 but same result
I was using squid2.7stable6 with tproxy in bridge mode .My network traffic
is 100 MBps and request rate around 400-450req/sec.At
Hello again,
This time, I got access to a pc in the AD domain.
When I monitor for both udp and tcp port 88, there is krb communication
to be seen but it doesn't look right.
From AD server to client I see the following error:
krb5kdc_err_s_principal_unknown
It looks like this: (only krb5 and
Hi,
i have a non-accel non-transparent squid 3.1 running on port 80, and
when someone accesses the proxy directly (via http://hostname or
http://ip) i want the proxy to show an explanation website.
At the current state, it shows an invalid URL ... while trying to
retrieve the URL: / error on
I might be completely misunderstanding your request but can't you just
run a http daemon like apache on your proxyserver that serves a page
with explanations?
rgds,
Lieven
Nils Hügelmann wrote:
Hi,
i have a non-accel non-transparent squid 3.1 running on port 80, and
when someone accesses
Hi Lieven,
The problem seems to be the krb5kdc_err_s_principal_unknown error. If you
took the capture earlier shoudl have seen a TGS REQ in wireshark for
HTTP/squid3-proxy.domain.local and AD says it does not anything about this
principal. Can you search AD if you have an entry with
That seems to clarify my problems. thank you.
After the mkstutil, I saw that a new computer object had been made in
the AD.
In adsiedit, I opened this squid3-proxy computeraccount and checked it's
principalname service.
There was only HTTP/domain.local so I manually added
Changing the name may not be enough. Delete the AD entry and the keytab and
create a new entry with keytab.
Regards
Markus
Lieven lieve...@gmail.com wrote in message
news:4be9c40a.1090...@gmail.com...
That seems to clarify my problems. thank you.
After the mkstutil, I saw that a new
Greetings,
I am configuring a Squid/Dansguardian web proxy/content filter. The
flow of traffic looks like this:
Client -- Proxy:8080 (Dansguardian) -- 127.0.0.1:3128 (Squid running
on Proxy) -- Edge firewall
The relevant portions of squid.conf follow:
Ben Miller wrote:
Greetings,
I am configuring a Squid/Dansguardian web proxy/content filter. The
flow of traffic looks like this:
Client -- Proxy:8080 (Dansguardian) -- 127.0.0.1:3128 (Squid running
on Proxy) -- Edge firewall
The relevant portions of squid.conf follow:
Hello,
I am sure this must be a common question... please excuse.
Does there exist a tool or example configuration that will enable me to log,
and display in a nice HR department friendly format, the sites that users in
our small office network are visiting?
We are already using OpenDNS for
17 matches
Mail list logo