Dear list,
I upgraded to 3.1.4 but since then all my siblings seems to be down :(
$ ./squidclient -h myserver -p myport mgr:server_list
.
.
Status : Down
.
.
This is strange because i got plenty of icpv2 (3130) traffic over the wire
(tcpdump).
It (still) works well with 3.1.3. Didn't
On Mon, May 31, 2010 at 11:25 PM, Joseph L. Casale
jcas...@activenetwerx.com wrote:
Check the first two directives in your conf, see who can write
there.
Hello, Thanks for your reply, I have some rights issues but even when
i assign the right permissions (ie. squid), it still cannot read them:
Hello,
a user of mine is complaining that with IE 8 he cannot open URLS like
ftp://u...@site.tld though my cache (the same works quite well with
chrome) on his Windows seven PC.
He gets:
ERROR
Cache Access Denied
I'm using Squid and Dansguardian to block and cache sites.
Everything works great but accessing OWA or Sharepoint related site with
authentication doesn't work. I get a great non-descript error in IE:
Internet Explorer cannot display the webpage. If I try using Chrome,
the login prompt just
tis 2010-06-01 klockan 12:38 + skrev sameer khan:
We are using 2 x 320GB SATA2 with reiserfs 3.6. The machine experiences high
iowait when the cache reaches cache_swap_low. What we have observed that it
is constantly stuck at cache_swap_low. If we purge the cache it starts to
work fine
tis 2010-06-01 klockan 15:12 +0200 skrev Luciano Mannucci:
Hello,
a user of mine is complaining that with IE 8 he cannot open URLS like
ftp://u...@site.tld though my cache (the same works quite well with
chrome) on his Windows seven PC.
The official standard is ftp://user:passw...@host/
tis 2010-06-01 klockan 00:23 -0500 skrev Luis Daniel Lucio Quiroz:
strict was removed because at least in mandriva perl, it was complaining
about
that some variables didnt exists
Which variabes?
Regards
Henrik
Hello all
At this moment I am using the exceptions at the browsers to avoid send
the request to the proxy server for internal URLs.
Is there a way we can send the URL to the proxy server and then the
proxy identify the URL and send it back to the internal network and find
the correct
More information based on the searches I've done...
I'm using transparent mode on the squid proxy (without auth). Well,
I've got an AUP page set up for the users to agree to but no
LDAP/AD/NTLM auth is being performed on this proxy.
However, I tried the other squid proxy with ntlm_auth and it
Le mardi 1 juin 2010 10:23:05, Henrik Nordström a écrit :
tis 2010-06-01 klockan 00:23 -0500 skrev Luis Daniel Lucio Quiroz:
strict was removed because at least in mandriva perl, it was complaining
about that some variables didnt exists
Which variabes?
Regards
Henrik
I dont remember,
i
Hi,
In my cache.log following lines appear.
2010/06/01 12:11:10| parseHttpRequest: Requestheader contains NULL characters
2010/06/01 12:11:10| parseHttpRequest: Unsupported method ' '
2010/06/01 12:11:10| clientReadRequest: FD 131 (192.168.0.14:54629)
Invalid Request
These appear to see a site
hey henrik,
thanks for replying, any solution to the problem ?
Subject: Re: [squid-users] high iowait on cache_swap_low
From: hen...@henriknordstrom.net
To: khanza...@hotmail.com
CC: squid-users@squid-cache.org
Date: Tue, 1 Jun 2010 17:19:55
tis 2010-06-01 klockan 17:38 + skrev sameer khan:
thanks for replying, any solution to the problem ?
More disks?
COSS storage type (unfortunately not stable in Squid-3)
Regards
Henrik
tis 2010-06-01 klockan 10:53 -0500 skrev Juan Cardoza:
Is there a way we can send the URL to the proxy server and then the
proxy identify the URL and send it back to the internal network and find
the correct direccion. The idea to do this is to avoid the domain
request process, because
hey
yea i am think about put one or two more drives in with same space spread on 4
drives, but that is the last option. is coss any better and is it stable for
squid 2.7 ?
thanks again
Subject: RE: [squid-users] high iowait on cache_swap_low
From:
tis 2010-06-01 klockan 17:59 + skrev sameer khan:
yea i am think about put one or two more drives in with same space
spread on 4 drives, but that is the last option. is coss any better
and is it stable for squid 2.7 ?
COSS in 2.7 is considered production quality.
Regards
Henrik
Hi guys, i have problem with slow performance in my squid
When i enter the page WITHOUT squid, pages are loaded in ~1 sec,
but when i turn on SQUID - page load in 70% in 1 sec, and then few
images are loading very slowly
I made flash movie - you can see how this slow connevting VIA squid works
Did you check if you are hitting the FD limit? An output of General
Runtime Information from the cachemgr.cgi would provide some better
information.
Also, it appears you are using squid to provide local users better
access to the internet at large (also known as forward proxy). In
that case,
Hi,
You may spend as rtmp streaming through squid, I need access to
videoconferencing and no one can access
How I can do this?. Is it possible with Squid?
My system:
Centos 5.4
Squid 2.6 Stable
Thank you,
--
Pedro
Good day,
I have squid and squidGuard installed with domaine controller , i need to
create groups in this (some groups have access to intenet the other no) I
need to use the groups and users that i have in my active directory
it s possible to do this?
I will be thankful if you can help me .
Hello,
Is there a way to see the logs generated by squid_session after setting =
the -b flag? The file exists, but is not readable.
Thanks, W
--
Winfield
Winfield Henry
(336) 506-4136
Information Systems
Alamance Community College
I thik that this is something to do it with many requests, because
half of images are loaded imiedietly (with hits MISS) , and rest are
loaded after few seconds (also MISSED) - missed because i have erased
cache. and is page is cached - it works fine. Only NEW requests are
working slowly
(Read
tis 2010-06-01 klockan 16:10 -0400 skrev Winfield Henry:
Is there a way to see the logs generated by squid_session after setting =
the -b flag? The file exists, but is not readable.
Thanks, W
It's a BDB key-value database, not a log.
It only contains timestamps when each session was last
On Tue, 1 Jun 2010 11:25:35 -0500, Johnson, S sjohn...@edina.k12.mn.us
wrote:
More information based on the searches I've done...
I'm using transparent mode on the squid proxy (without auth). Well,
I've got an AUP page set up for the users to agree to but no
LDAP/AD/NTLM auth is being
On Tue, 1 Jun 2010 15:00:31 -0400, Pedro Silva pedro...@gmail.com wrote:
Hi,
You may spend as rtmp streaming through squid, I need access to
videoconferencing and no one can access
How I can do this?. Is it possible with Squid?
My system:
Centos 5.4
Squid 2.6 Stable
Not directly.
On Tue, 1 Jun 2010 23:50:35 +0200, Tytus Rogalewski tytan...@gmail.com
wrote:
I thik that this is something to do it with many requests, because
half of images are loaded imiedietly (with hits MISS) , and rest are
loaded after few seconds (also MISSED) - missed because i have erased
cache. and
On Tue, 1 Jun 2010 12:05:46 -0700 (PDT), squidACL zakariai...@gmail.com
wrote:
Good day,
I have squid and squidGuard installed with domaine controller , i need
to
create groups in this (some groups have access to intenet the other no)
I
need to use the groups and users that i have in my
On Tue, 01 Jun 2010 17:21:58 +0200, Henrik Nordström
hen...@henriknordstrom.net wrote:
tis 2010-06-01 klockan 15:12 +0200 skrev Luciano Mannucci:
Hello,
a user of mine is complaining that with IE 8 he cannot open URLS like
ftp://u...@site.tld though my cache (the same works quite well with
http://www.appliansys.com/products/cachebox/caching_appliances_video_caching.html
i wonder if this is possible in 3.1
On Tue, 1 Jun 2010 13:07:28 -0400, Pedro Silva pedro...@gmail.com wrote:
Hi,
In my cache.log following lines appear.
2010/06/01 12:11:10| parseHttpRequest: Requestheader contains NULL
characters
2010/06/01 12:11:10| parseHttpRequest: Unsupported method ' '
2010/06/01 12:11:10|
On Tue, 1 Jun 2010 19:35:47 -0500, Luis Daniel Lucio Quiroz
luis.daniel.lu...@gmail.com wrote:
http://www.appliansys.com/products/cachebox/caching_appliances_video_caching.html
i wonder if this is possible in 3.1
So, what have we done? [...] Created custom extensions to Squid, the
caching
Le mardi 1 juin 2010 21:04:06, Amos Jeffries a écrit :
On Tue, 1 Jun 2010 19:35:47 -0500, Luis Daniel Lucio Quiroz
luis.daniel.lu...@gmail.com wrote:
http://www.appliansys.com/products/cachebox/caching_appliances_video_cachin
g.html
i wonder if this is possible in 3.1
So, what have we
Hi guys. I'm using squid 3.1.4 and since of first 3.1 stable release
I'm suffering from memory leak problems too. My production server is a
CentOS 5.4 32 bits (kernel 2.6.18-164.6.1.el5). It has 2GB of RAM
(512MB reserved to squid cache_mem) and 6GB of disk space reserved to
squid's disk cache. In
33 matches
Mail list logo