Hi!
I have run a test with ab running 1 hits with a single thread loading an
image with a spacing of 5 minutes of inactivity and there is still a
variation even measurable with apache bench:
Date time mean RT measured by AB
2010-09-16 02:55:12 37.033
2010-09-16 03:01:22 37.633
2010/09/20 12:40:56| WARNING: Forwarding loop detected for:
Client: 10.25.88.175 http_port: 10.1.82.175:8080
As far as alerts are concerned i got your point thanks!
i am getting these kind of messages in my cache.log can i ignore these warnings
in reference to my requirements(internet backup
Hello Amos, all,
Many thanks for taking a look at my config!
Comments inline (easier)
On Fri, 2010-09-17 at 23:17 +1200, Amos Jeffries wrote:
On 17/09/10 19:32, Nikolaos Pavlidis wrote:
Hello Amos, all,
Thank you for your response. As far as understanding what you mean I do
(thats
On 21/09/10 00:02, Nikolaos Pavlidis wrote:
Hello Amos, all,
Many thanks for taking a look at my config!
Comments inline (easier)
On Fri, 2010-09-17 at 23:17 +1200, Amos Jeffries wrote:
On 17/09/10 19:32, Nikolaos Pavlidis wrote:
Hello Amos, all,
Thank you for your response. As far as
On 20/09/10 19:49, GIGO . wrote:
2010/09/20 12:40:56| WARNING: Forwarding loop detected for:
Client: 10.25.88.175 http_port: 10.1.82.175:8080
As far as alerts are concerned i got your point thanks!
i am getting these kind of messages in my cache.log can i ignore these warnings
in reference
On 18/09/10 06:00, Andrei wrote:
I'm a newbie. To get Squid started all I was able to do is create the
config below. This works but it feels like it could be a little
faster. I have about 300 users.
Are there any other options that you would recommend adding to this
config file? This is my
or version 2.7?
version 3.1.8 of 20100920 it is a stable version?
Thank you in advance.
Sincerely,
PATRICK.
* PATRICK LANOT
Responsable Régional Informatique
* Délégation régionale Inserm Midi-Pyrénées / Limousin
BP 3048
mån 2010-09-20 klockan 13:02 +0100 skrev Nikolaos Pavlidis:
Unfortunately that did not work! If I define an IP address on the port
it just stops working for some reason! squid reloads with no errors but
access to the host times out.
Odd. Works for me, and is needed to be able to specify the
the problem here).It
would be better that I install the latest version 3.1.8 or version 2.7?
version 3.1.8 of 20100920 it is a stable version?
I would use 3.1.8. Allows you to replace squidclamav with c-icap +
clamav for a better virus scanning experience.
Regards
Henrik
Thanks Chad, Henrik.
If we queue each request and send it after receiving the response for the
previous one, we should be okay. How will this work for HTTP progressive
download videos that support seek streaming (pseudo-streaming) - The first
request will result in server sending the video file
mån 2010-09-20 klockan 12:19 -0700 skrev cachenewbie:
If we queue each request and send it after receiving the response for the
previous one, we should be okay.
How would that make you do okay?
How will this work for HTTP progressive
download videos that support seek streaming
Thanks for the response. I should have clarified further. See inline below/
If we queue each request and send it after receiving the response for the
previous one, we should be okay.
[Henrik]How would that make you do okay?
--- I meant that there is no problem in matching request to response
Thank you so much! I'm not sure if I understood everything, but here
is what I have so far.
1) 1GB of RAM in this machine (P4, 40GB IDE, 1GB RAM).
2) Running Squid 3.1.3 now :-)
3) Not sure what you meant with AUFS. Does this need to be changed?
cache_dir ufs /var/spool/squid3 7000 16 256
4)
Thanks Amos.
I ran the debug mode and took some output from cache.log. Can you take a peek
at the end of this log file? I see a Nonce count doesn't match around the
time it starts to fail authentication again. The logs below were generated by:
1) open browser, navigate to google.com
2)
I have a cache server running squid2.7.9. I wrote the follow
configurations:
acl Safe_ports port 80
acl Domain dstdomain .china.com
acl Domain dstdomain .haiyang2012.com
http_access allow Safe_ports Domain
http_access deny all
cache_peer 10.168.168.13 parent 80 0 no-query no-netdb-exchange
On Tue, 21 Sep 2010 06:35:49 +0800, Gemmy chen...@163.com wrote:
I have a cache server running squid2.7.9. I wrote the follow
configurations:
acl Safe_ports port 80
acl Domain dstdomain .china.com
acl Domain dstdomain .haiyang2012.com
http_access allow Safe_ports Domain
http_access deny all
mån 2010-09-20 klockan 14:12 -0700 skrev cachenewbie:
Thanks for the response. I should have clarified further. See inline below/
If we queue each request and send it after receiving the response for the
previous one, we should be okay.
[Henrik]How would that make you do okay?
--- I
file warning that
it's not recognized.
But it's in the squid.conf.documented docs as valid.
I tried testing in 3.2.0.2-20100920 but make install fails with:
forward.cc: In member function 'void FwdState::doneWithRetries()':
forward.cc:562: error: 'class BodyPipe' has no member named
On Mon, 20 Sep 2010 14:31:45 -0700, Andrei funactivit...@gmail.com
wrote:
Thank you so much! I'm not sure if I understood everything, but here
is what I have so far.
1) 1GB of RAM in this machine (P4, 40GB IDE, 1GB RAM).
2) Running Squid 3.1.3 now :-)
3) Not sure what you meant with AUFS.
Hi
I want to make a workload test for squid, I want to use the tool
web-polygraph which has some standard workload models. But in these
workload, the content size is too small to me.
Dose anyone has a modified workload with big content size or has another
method to simulate big file
On Tue, 21 Sep 2010 10:53:37 +0800, Sean SPALDING s.spald...@ecu.edu.au
wrote:
Hi all,
I'm struggling with the configuration of a PHP based content management
system served from Apache behind a squid 2.6 reverse proxy.
Specifically,
it's serving out stale content, ie. responses that are past
On Tue, 21 Sep 2010 10:27:12 +0800, du du ergod@gmail.com wrote:
Hi
I want to make a workload test for squid, I want to use the tool
web-polygraph which has some standard workload models. But in these
workload, the content size is too small to me.
Dose anyone has a modified workload
22 matches
Mail list logo
