On 28/04/2012 9:38 a.m., Bruce Lysik wrote:
Hi guys,
Running latest 3.1 in a reverse proxy mode. 3 beefy servers with 96GB of ram.
Seeing an odd problem:
Origin - customer, equals fast speeds. (Tested by curling from a desktop to
origin.)
Origin - squid, equals fast speeds. (Tested by
Thanks for the reply Eliezer.
I've had a read through the more readable explanation and well. It definitely
was more readable. I think Ill need to re-read the percentage field a few more
times before I grasp it completely (rather busy here). However Ive taken your
advice onboard and ive
Hi,
There are 2 squids running behind 2 different firewalls and 2 diffrent
internet connections (same isp, different network ranges). Users
report that they get problems viewing the site.
When i look at that site through 2 proxies and with different browsers
i get different results (and its
Hi,
Will squid reconfigure ICAP settings if a 'squid -k reconfigure' is triggered?
Want to know can we update ICAP acl settings on the fly without restarting
squid.
Thanks and regards,
Justin
This message and the information contained herein is proprietary and
confidential and subject to the
Hi,
I'm having a number of problems with Squid at the moment with duplicate
Etags in the headers. I'm using Squid as an accelerator to forward
traffic to Apache, which serves up a Drupal installation.
After roughly 3 days, a number of pages on the site start to fail with
400 Bad Request
On Mon, Apr 30, 2012 at 11:32 PM, Andy Taylor a...@tayble.com wrote:
Hi,
I'm having a number of problems with Squid at the moment with duplicate
Etags in the headers. I'm using Squid as an accelerator to forward traffic
to Apache, which serves up a Drupal installation.
After roughly 3 days,
My client access configuration is as follows.
always_direct allow all
http_access allow all
# Squid normally listens to port 3128
http_port 3128 ssl-bump generate-host-certificates=on
dynamic_cert_mem_cache_size=4MB cert=/usr/local/squid/etc/host.pem
url_rewrite_children 64
url_rewrite_program
On 30/04/2012 11:56 p.m., Roman Gelfand wrote:
My client access configuration is as follows.
always_direct allow all
http_access allow all
# Squid normally listens to port 3128
http_port 3128 ssl-bump generate-host-certificates=on
dynamic_cert_mem_cache_size=4MB
On 30/04/2012 8:37 p.m., Justin Lawler wrote:
Hi,
Will squid reconfigure ICAP settings if a 'squid -k reconfigure' is triggered?
Squid re-loads the whole config file, rotates the logs, and restarts all
helper processes when reconfigure is triggered.
Want to know can we update ICAP acl
Hi,
I am new to squid and I am trying to run in on my ClearOS 5.2 gateway
where it is supplied as a pre-configured package. However, whenever I
try to start it I lose all internet access. I would like to run it in
transparent mode which is a menu option I have for it.
My cache.log reads:
On 30/04/2012 7:24 p.m., a bv wrote:
Hi,
There are 2 squids running behind 2 different firewalls and 2 diffrent
internet connections (same isp, different network ranges). Users
report that they get problems viewing the site.
When i look at that site through 2 proxies and with different
My squid server is behind NATed firewall. When accessing site
www.dnsstuff.com, it reports my ip address as local address of the
client.
For instance,
1. squid server ip is 192.168.1.10
2. client accesing the www.dnsstuff.com site via squid server is 192.168.1.101.
The www.dnsstuff.com reports
set forwarded_for off
On Mon, Apr 30, 2012 at 5:50 PM, Roman Gelfand rgelfa...@gmail.com wrote:
My squid server is behind NATed firewall. When accessing site
www.dnsstuff.com, it reports my ip address as local address of the
client.
For instance,
1. squid server ip is 192.168.1.10
2.
Thanks Eliezer Croitoru this has been a helpful stuff .
ill let you know if found any difficulty in deplying procedure.
Thanks
On Mon, Apr 30, 2012 at 3:27 AM, Eliezer Croitoru elie...@ngtech.co.il wrote:
On 29/04/2012 08:49, Muhammad Yousuf Khan wrote:
IT seems that things are doing good
Hi,
Im facing a weird problem with tproxy few weeks, the problem is, all
work fine except clients that is behind a tplink router and another
one that i dont remembe, but almost tplink wr541g routers, if i remove
iptables mangle redirect rule, client has traffic, enable not, dont
speak english very
I would like to configure our squid proxy (Version 3.0.STABLE19 on Linux
Ubuntu 10.04) to use a pool of addresses for outgoing connections. I
setup squid as a transparent proxy using http_port 3128 transparent in
the squid.conf, and then I setup an iptables to provide source nat
address
On 30/04/2012 23:44, Kirk Hoganson wrote:
I would like to configure our squid proxy (Version 3.0.STABLE19 on Linux
Ubuntu 10.04) to use a pool of addresses for outgoing connections. I
setup squid as a transparent proxy using http_port 3128 transparent in
the squid.conf, and then I setup an
On 30/04/2012 10:24, a bv wrote:
Hi,
There are 2 squids running behind 2 different firewalls and 2 diffrent
internet connections (same isp, different network ranges). Users
report that they get problems viewing the site.
When i look at that site through 2 proxies and with different browsers
i
On 30/04/2012 14:32, Andy Taylor wrote:
Hi,
I'm having a number of problems with Squid at the moment with duplicate
Etags in the headers. I'm using Squid as an accelerator to forward
traffic to Apache, which serves up a Drupal installation.
After roughly 3 days, a number of pages on the site
On 01.05.2012 08:42, Daniel Echizen wrote:
Hi,
Im facing a weird problem with tproxy few weeks, the problem is, all
work fine except clients that is behind a tplink router and another
one that i dont remembe, but almost tplink wr541g routers, if i
remove
iptables mangle redirect rule, client
On Apr 29, 2012, at 10:36 PM, Amos Jeffries wrote:
On 28/04/2012 10:37 a.m., Squid Tiz wrote:
I am kinda new to squid. Been looking over the documentation and I just
wanted a sanity check on what I am trying to do.
I have a web client that hits my squid server. The squid connects to an
On 1/05/2012 1:36 a.m., Nick Howitt wrote:
Hi,
I am new to squid and I am trying to run in on my ClearOS 5.2 gateway
where it is supplied as a pre-configured package. However, whenever I
try to start it I lose all internet access. I would like to run it in
transparent mode which is a menu
I'm using squid 3.1.15 (amos ppa) + ubuntu 10.04
And we can't open the 'register' link (
https://publish.ovi.com/register/country_and_account_type ) located
at https://publish.ovi.com/login
When we click 'register' the login page get refreshed.
Any ideas?
23 matches
Mail list logo
