On Fri, 2008-10-10 at 21:59 +0200, Henrik Nordstrom wrote:
If you have ip forwarding enabled then you can use iptables rules to
select what traffic should really be sent to the proxy and what should
be forwarded as-is, as a complement to the acls possible in the router.
Yep, I'm doing this on
Hi,
On Fri, 2008-10-10 at 02:41 +0200, Henrik Nordstrom wrote:
It's not from Squid, these packets are from the client, and because the
proxy server no longer knows about the connection the packet gets
forwarded.
Thank You Henrik, it's so obvious right now.
You can avoid this if you
Hi,
I have transparent SQUID proxy with L2/L3 switch redirecting HTTP
traffic to proxy through GRE tunnel. Yesterday, I've noticed that SQUID
box is sending strange packets (TCP RST) to destination web server in
order to terminate connection. The problem is because these packets have
source
Hi,
You don't have 172.16.1.3 address on Your box and squid can't bind to
it.
Dalibor
On Mon, 2008-07-21 at 14:17 +0500, Munawar Zeeshan (zmunawar) wrote:
I want to change the outgoing src address of some users , exiting from my
squid box
I tried to configure tcp_outgoing_address option
Hi,
can someone explain me how SQUID handles intercache communication
especially how does it forward HTTP request to parent proxy.
SQUID is not using any caching protocol. cache_peer configuration:
cache_peer A.B.C.D parent 8080 0 no-query no-digest no-netdb-exchange
round-robin proxy-only
Hi Ryan,
I managed to connect 5x CISCO 6500 series switches with one instance od
Squid. Currently, it is not possible to run single squid instance for
switches/routers. I tried.
Problem lies in cache assignment method, you can't use MASK and HASH
assignment simultaneously.
From squid.conf:
#
Hi Tek,
On Thu, 2007-11-08 at 13:09 +0545, Tek Bahadur Limbu wrote:
Hi Dalibor,
Dalibor Dukic wrote:
On Wed, 2007-11-07 at 17:15 +0545, Tek Bahadur Limbu wrote:
Hi Adrian,
Adrian Chadd wrote:
On Wed, Nov 07, 2007, Hemant Raj Chhetri wrote:
Hi Adrian,
I am also facing
On Wed, 2007-11-07 at 12:45 +0900, Adrian Chadd wrote:
On Tue, Nov 06, 2007, Dalibor Dukic wrote:
Hi,
I configured transparent squid box and WCCPv2 with CISCO 6k5. After some
time I noticed that clients have problems with HTTPS sites. If I
manually configure proxy setting in browser
On Wed, 2007-11-07 at 17:15 +0545, Tek Bahadur Limbu wrote:
Hi Adrian,
Adrian Chadd wrote:
On Wed, Nov 07, 2007, Hemant Raj Chhetri wrote:
Hi Adrian,
I am also facing the same problem with https
sites. Yahoo works fine with me but I am having problem
with hotmail.
On Wed, 2007-11-07 at 18:21 +0900, Adrian Chadd wrote:
On Wed, Nov 07, 2007, Dalibor Dukic wrote:
OK, but when I put proxy settings manually in browser even for SSL,
SQUID will just start passing data from client to server. I can't do
this with WCCP ?
No. The browser wraps up the SSL
Hi,
I configured transparent squid box and WCCPv2 with CISCO 6k5. After some
time I noticed that clients have problems with HTTPS sites. If I
manually configure proxy setting in browser and bypass WCCP everything
goes OK.
I'm using standard service group (web-cache). Maybe some web server
check
On Wed, 2007-07-25 at 08:52 +0200, Arnaud Loonstra wrote:
On Tue, 2007-07-24 at 22:25 +0200, Dalibor Dukic wrote:
On Tue, 2007-07-24 at 15:27 +0200, Arnaud Loonstra wrote:
Hi,
I can't seem to find any documentation about setting up squid with
WCCPv2 and multiple cisco routers. So
On Tue, 2007-07-24 at 15:27 +0200, Arnaud Loonstra wrote:
Hi,
I can't seem to find any documentation about setting up squid with
WCCPv2 and multiple cisco routers. So this might be good for the
archives if someone helps me out here.
What is the version of squid?
--
Dalibor Dukic [EMAIL
On Wed, 2007-06-13 at 00:39 +0200, Henrik Nordstrom wrote:
I have successfully setup transparent proxy with wccpv2 and catalyst 6k5
and this works perfect but I need multi-router support in wccpv2
implementation. Is current implementation capable to work with more than
one wccp router/L3
On Wed, 2007-06-13 at 09:50 +0200, Henrik Nordstrom wrote:
ons 2007-06-13 klockan 08:38 +0200 skrev Dalibor Dukic:
Very well, can i use different assignment i return method for different
wccp router?
Not sure.
I'll try setup with 3 cat6k5 and update group regarding this.
Thank You
Hi,
I have successfully setup transparent proxy with wccpv2 and catalyst 6k5
and this works perfect but I need multi-router support in wccpv2
implementation. Is current implementation capable to work with more than
one wccp router/L3 switch ?
I'm using Squid Version 2.6.STABLE5 on Debian Etch
Hi,
I have successfully setup transparent proxy with wccpv2 and catalyst 6k5
and this works perfect but I need multi-router support in wccpv2
implementation. Is current implementation capable to work with more than
one wccp router/L3 switch ?
I'm using Squid Version 2.6.STABLE5 on Debian Etch
17 matches
Mail list logo
