Hi
I've got a bunch of ACLs that block sites based on various criteria.
Sometimes I get an Access Denied that I can't match to any of my ACLs
just by looking at the URL. How do I get squid to tell me which ACL
triggered it?
Thanks
Dayo
On Fri, 23 Sep 2011 09:32:01 +0100, Dayo Adewunmi wrote:
Hi
I've noticed that some sites which I deny access to with http_access deny
are blocked when accessed with http://example.com but accessible
through https://example.com. How do I ensure the https://example.com
is also blocked?
De
sorry
Hi
I've noticed that some sites which I deny access to with http_access deny
are blocked when accessed with http://example.com but accessible through
https://example.com. How do I ensure the https://example.com is also
blocked?
Thanks
Dayo
Hi
I'm trying to set a limit of 10MB for the upload.
request_body_max_size 10240 KB # 10MB upload limit
I tested it by trying to upload a 50MB file with rsync -aEPhu and it did
not cut off after reaching 10MB transfer. How come?
Specs: ubuntu 8.04 2.6.18-1ubuntu3
Best regards
Dayo
Hi
I noticed that chromium-browser does not display the error pages in
/usr/share/squid/errors. Does anyone know how to get it to display them?
Thanks
Dayo
Hi
Is there any feasible way of limiting VPN users? They seem to be maxing
out my link, every now and then. So far, what I've been able to do is
find out what URL they VPN to and adding that to a delay pool.
Best regards
Dayo
but it's refusing
connections. Must have bungled something. Here's my squid3 config:
http://pastebin.com/UNuRa9ww
Thanks
Dayo
/63e6hw68http://pastebin.com/63e6hw68
2.6.18-1ubuntu3 on Ubuntu 8.04
Thanks
Dayo
On 03/19/2011 12:51 AM, Amos Jeffries wrote:
On 19/03/11 07:37, Dayo Adewunmi wrote:
Hi
I've got a number of delay pools,one of which is only really used during
daytime.
Is there anyway for me to take the bandwidth allocated to that daytime
pool and assign it to the other pools?
On 03/19/2011 12:51 AM, Amos Jeffries wrote:
On 19/03/11 07:37, Dayo Adewunmi wrote:
Hi
I've got a number of delay pools,one of which is only really used during
daytime.
Is there anyway for me to take the bandwidth allocated to that daytime
pool and assign it to the other pools?
Not as
On 03/19/2011 12:51 AM, Amos Jeffries wrote:
On 19/03/11 07:37, Dayo Adewunmi wrote:
Hi
I've got a number of delay pools,one of which is only really used during
daytime.
Is there anyway for me to take the bandwidth allocated to that daytime
pool and assign it to the other pools?
Not as
Hi
I've got a number of delay pools,one of which is only really used during
daytime.
Is there anyway for me to take the bandwidth allocated to that daytime
pool and assign it to the other pools?
My specs are: 2.6.18-1ubuntu3 on Ubuntu 8.04.
Best regards
Dayo
On 03/13/2011 09:57 AM, Amos Jeffries wrote:
On 13/03/11 20:50, Dayo Adewunmi wrote:
Hi
Got an issue with my delay pools. My specs are 2.6.18-1ubuntu3 on Ubuntu
8.04.
Somehow the group lan-unknown seem to keep hogging all the bandwidth.
How do I keep them firmly inside their allocated delay
ess 6 deny hires
delay_access 6 deny local_dest
delay_access 6 deny html_pages
delay_access 6 deny text_pages
delay_access 6 allow lan-cc-admins
delay_access 6 deny all
Best regards
Dayo
On 03/02/2011 10:04 AM, Hasanen AL-Bana wrote:
Please paste the output of : squidclient mgr:info
You might have ran out of disk space and your squid for some reason is
not purging objects as it should.
On Wed, Mar 2, 2011 at 11:59 AM, Dayo Adewunmi wrote:
Hi
For about 3 hours now, I
ation: http://pastebin.com/fJFV5dD0
Munin graph:http://i.imgur.com/b2hDu.png
Thanks
Dayo
about 60GB free space on
that partition. I was thinking of using about 50GB for cache_dir.
I read that for linux aufs is better than ufs. What else do I need to
consider except change "ufs" to "aufs" and change "100" to "5"?
Thanks
Dayo
er (not -ng) to work on top of a transparent squid box?
Thanks
Dayo
Hi
I just had someone max out my bandwidth with an upload. How do I slow
down upload speeds in squid 2.6.18-1ubuntu3?
Thanks
Dayo
Hi
I just had someone max out my bandwidth with an upload. How do I slow
down upload speeds in squid 2.6.18-1ubuntu3?
Thanks
Dayo
Nobody?
Original Message
Subject:Daily per MAC addr bandwidth caps
Date: Mon, 24 May 2010 10:59:52 +0100
From: Dayo Adewunmi
Reply-To: contactd...@gmail.com
To: squid-users@squid-cache.org
Hi
Is it possible to set daily bandwidth caps in squid, and
Hi
Is it possible to set daily bandwidth caps in squid, and automatically
deny access to a MAC
address when that limit has been reached?
Thanks
Dayo
ound and the solutions I've been finding are people
doing things like not adding "transparent" to their http_port line, or
defining the line twice, etc. Which doesn't apply to
my case, because I check my squid.conf and the http_port line is fine.
What could be causing this HTTP issue?
Thanks
Dayo
Hi everyone
Is it possible to give a list of allowed MAC addresses in squid, i.e.
via ACLs or a file
and then have it block unauthorized MACs?
Thanks
Dayo
Dieter Bloms wrote:
Hi,
On Wed, Mar 31, Dayo Adewunmi wrote:
There's no other proxy between clients and squid. I'm trying to get squid
to include LAN IPs for external servers. So, for that it's "forwarded_for
on"? Or do you mean "follow_x_forwarded_for on&qu
Dieter Bloms wrote:
Hi,
On Wed, Mar 31, Dayo Adewunmi wrote:
How do I use `follow_x_forwarded_for` to allow X-Forwarded-For header for all
IP's in my LAN 192.168.0.0/21. They all go through the squid proxy, 192.168.0.1.
it depends on what you want.
Do you have an another
Hi
How do I use `follow_x_forwarded_for` to allow X-Forwarded-For header for all
IP's in my LAN 192.168.0.0/21. They all go through the squid proxy, 192.168.0.1.
Thanks
Dayo
How do I set squid to always allow the user's LAN IP to be included
in outgoing email headers? Sometimes the LAN IP is there, sometimes it
isn't.
And when it isn't, just the public IP is included in the "Received from"
field.
Best regards
Dayo
Problem Existed Between Keyboard And Chair.
It's working now.
Dayo
Original Message
Subject:blocking users from x amount of connections with acl maxconn
Date: Mon, 22 Mar 2010 12:00:53 +0100
From: Dayo Adewunmi
Reply-To: contactd...@gmail.com
To:
Hi
I'm trying to set a limit of no more than three connections per user
with maxconn
acl lan-ebola dst 192.168.24.18
acl limitebola maxconn 3
http_access deny limitebola lan-ebola
http_access allow !limitebola
It's not limiting anything, though.
Best regards
Dayo
0
acl labs src 192.168.3.19-192.168.3.200
http_access deny labs !academic01
deny_info ERR_LAB_SCHEDULE labs
However, they keep getting the default error msg, and not the customized
one.
What am I missing here?
Thanks
ssing here?
Thanks
Dayo
_
Tell us your greatest, weirdest and funniest Hotmail stories
http://clk.atdmt.com/UKM/go/195013117/direct/01/
Restarting didn't help. I usually just reload. However, I've noticed
0
acl labs src 192.168.3.19-192.168.3.200
http_access deny labs !academic01
deny_info ERR_LAB_SCHEDULE labs
However, they keep getting the default error msg, and not the customized
one.
What am I missing here?
Thanks
Dayo
Amos Jeffries wrote:
Dayo Adewunmi wrote:
Hi all
In /var/log/squid/access.log on Ubuntu 8.04, squid 2.6.18-1ubuntu3
the log lines get
written to file with the epoch time, instead of the human-readable time.
How can I get squid to write to access.log with human-readable time?
You need a
Hi all
In /var/log/squid/access.log on Ubuntu 8.04, squid 2.6.18-1ubuntu3 the
log lines get
written to file with the epoch time, instead of the human-readable time.
How can I get squid to write to access.log with human-readable time?
Thanks
Best regards
Dayo
0.0/8 gw 192.168.5.2
Please help
Dayo
Preferrably, without him hogging all the bandwidth. Which wouldn't be an
issue if I could put the proxy settings into his browser, as squid is
configured
to use delay pools.
Thanks
Dayo
Hi
I want to split a subnet in two, and have two different class 2 delay pools
take effect.
Can I define the ACLs like this:
acl first-group dst 192.168.4.0-20
acl second-group dst 192.168.4.21-254
Thanks
Best regards
Dayo
Kinkie wrote:
On Sun, Dec 13, 2009 at 6:36 PM, Dayo Adewunmi wrote:
Hi all
I was wondering if there needs to be any consideration that needs to be
taken
when it comes to ordering ACLs. My first block is a group of ACLs
determining
access to various sites. The block after that (further down
w lan-servers
delay_access 1 deny all
delay_class 2 1
delay_parameters 2 14000/14000
delay_access 2 allow lan-unknown bad-downloads
delay_access 2 allow lan-unknown ftp-downloads
delay_access 2 allow lan-unknown
delay_access 2 deny all
.
.
.
.
Best regards
Dayo
Amos Jeffries wrote:
On Wed, 09 Dec 2009 02:49:07 +0100, Dayo Adewunmi
wrote:
Hi guys?
I have delay pools for the various subnets in my network, the majority
of which are on wired LAN. There are some wifi APs with static IPs, and
these don't run any dhcp for clients that connect to
in
a single separate subnet. Should I be configuring delay pools for the
wifi APs, too?
Thanks
Dayo
Amos Jeffries wrote:
Dayo Adewunmi wrote:
Hi all
I'm using squid 2.6.18-1ubuntu3 on Ubuntu 8.04. So far I've
configured it
to deny access to a set of sites for all users, during the period of
8am-8pm.
Now, I want to grant certain users 24/7 access to the restricted sites.
I'v
o grant the exempted user access, but the problem is, after 8pm
the others
are still blocked from accessing the restricted sites.
Please help.
Best regards
Dayo
Original Message
Subject:acl regex not working right
Date: Sun, 11 Oct 2009 13:15:43 +0100
From: Dayo Adewunmi
Reply-To: contactd...@gmail.com
To: squid-users@squid-cache.org
Hi guys
the following acl is supposed to deny access to any sites with the
Hi guys
the following acl is supposed to deny access to any sites with the word
"warez" in the URL.
But it's not working. What am I doing wrong?
acl warez-sites url_regex -i warez
http_access deny warez-sites
OS: Ubuntu 8.04
Squid: 2.6.18-1ubuntu3
Thanks
Dayo
Ubuntu 8.04 I use the command "/usr/sbin/squid -k rotate" in a script
that runs weekly in
cron.
Best regards
Dayo
Thank you for your answer , me i use fedora . If you know how to do in
fedora will be thankfull
many thanks
It's probably the same. Check "man squid
id -k rotate" in a script
that runs weekly in
cron.
Best regards
Dayo
Kinkie wrote:
On Mon, Sep 14, 2009 at 9:59 AM, Dayo Adewunmi wrote:
Hi
I get these lines in my cache.log often. What do they mean?
A broken client or server. You can ignore them.
Ok, thanks
d=197041&cmp_id=bbcworld_fjfa283558FJFA"
Squid: 2.6.18-1ubuntu3
OS: Ubuntu 8.04 Hardy Heron
Best regards
Dayo
Henrik Nordstrom wrote:
fre 2009-08-28 klockan 09:44 +0100 skrev Dayo Adewunmi:
users? Is there a way to make an ACL that would limit the upload of just
a subset
of my network?
It can be done as an external acl based on the source IP and
Content-Length request header.
Regards
Henrik
Hi
I'm want to limit the upload rate of the users of one subnet. I was
looking through
the config file and found 'request_body_max_size', but that seems to
apply all
users? Is there a way to make an ACL that would limit the upload of just
a subset
of my network?
Thanks
Bes
Dayo Adewunmi wrote:
Hi
Usually, I have cron job that rotates two squid.conf files for me. One
with
an ACL for noaccess.dat (a list of sites not allowed during working
hours),
and the other with the noaccess.dat line commented out.
Now, I want to move away from the cron and use time-based
es listed in noaccess.dat. But right now it's allowing
access during
the noaccess period.
Please help.
squid: 2.6.18-1ubuntu3
OS: Ubuntu 8.04
Kernel: 2.6.24-24-server
Best regards
Dayo
Amos Jeffries wrote:
On Sun, 09 Aug 2009 15:03:10 +0100, Dayo Adewunmi
wrote:
Amos Jeffries wrote:
Dayo Adewunmi wrote:
Amos Jeffries wrote:
Dayo Adewunmi wrote:
Hi
Is this a valid config line?
delay_access 6 allow lan-students magic_words url_words
Hi
Is this a valid config line?
delay_access 6 allow lan-students magic_words url_words
Or do I need one for each acl?
Best regards
Dayo Adewunmi
any data for this request.
(squid/2.6.STABLE18)
I'm using squid on Ubuntu 8.04
Best regards
Dayo
ll as
acl Safe_ports port 10122
but they're both not working.
Best regards
Dayo Adewunmi
That is no
background images, no layout, just a blank page with a long scroll of
left-aligned text and images.
What's going on?
Best regards
Dayo Adewunmi
Chris Robertson wrote:
Dayo Adewunmi wrote:
Hi all
I've installed squid 2.6.STABLE18 and made my changes to
/etc/squid/squid.conf
Now, when I run squid -z I get this error:
# squid -z
2009/07/13 20:44:16| ACL name 'all' not defined!
FATAL: Bungled squid.conf line 691: http_
ed abnormally.
What am I doing wrong here?
Dayo
Amos Jeffries wrote:
Dayo Adewunmi wrote:
Amos Jeffries wrote:
Dayo Adewunmi wrote:
Is it possible to use noaccess.dat to block access to an entire
top-level domain?
Yes.
Now, what type of software are you using? and is it related to Squid
in any way?
Amos
I'm using 3.0.ST
Amos Jeffries wrote:
Dayo Adewunmi wrote:
Is it possible to use noaccess.dat to block access to an entire
top-level domain?
Yes.
Now, what type of software are you using? and is it related to Squid
in any way?
Amos
I'm using 3.0.STABLE1-1ubuntu1 on an Ubuntu 8.04 server.
In /etc/s
Is it possible to use noaccess.dat to block access to an entire
top-level domain?
Best regards
Dayo
e Digests
see http://www.squid-cache.org/Doc/FAQ/FAQ-16.html
Which of these options are included by default? For example, when I install
squid with apt, I get delay pools enabled by default. Is this the same for
installing squid from source?
Thanks
Best regards,
Dayo
I installed squid3 on ubuntu with apt. How would I go about enabling arp
ACL with this?
Jeff Pang wrote:
2009/6/24 Dayo Adewunmi :
Hi all,
I'm trying to block MAC address with this ACL:
Is there something else that needs to be included for 'arp' to become a
valid ACL type
2009/06/24 10:34:52| FD 15 Closing ICP connection
2009/06/24 10:34:52| aclParseAclLine: Invalid ACL type 'arp'
Is there something else that needs to be included for 'arp' to become a
valid ACL type?
Best regards
Dayo
english
Have a look at the delay_pools page on the wiki:
http://wiki.squid-cache.org/Features/DelayPools
Regards
Dayo
Hi,
can this line appear more than once in squid.conf?
delay_initial_bucket_level 100
Say, at the top of each delay pool definition block? I'm trying to give
different init ial buckets to different pools.
Regards
Dayo
Thys de Beer wrote:
HI All,
Dayo ...thanks...but i got the problem..and you wont believe this...the
child proxies are netcache appliances that ONLY want to work to parent
proxy on http port 3128 , i had my setup on 8080 (squid) , when i added
3128 again and setup netcache to use 3128 its
a squid2.6 and a squid3, so maybe I can spot a
mistake in your configs somewhere.
Regards
Dayo
http://www.experts-exchange.com/Networking/Linux_Networking/Q_23432218.html
>
> but that didn't help.
>
> Regards
>
> Dayo
Live.com'u deneyin - hızlı ve kişiselleştirilmiş giriş sayfanızla
istediğini
rking/Q_23432218.html
but that didn't help.
Regards
Dayo
74 matches
Mail list logo