[squid-users] Re:Re: [squid-users] How to setup two ADSL line on a single linux box?

2007-09-12 Thread elvis . altherr
ons 2007-09-12 klockan 14:06 +0630 skrev kyaw min: I want to setup a linux box that has 3 network cards in it...one of the network cards would be assigned a private ip address and the other two network cards would be assigned a dynamic public ip address by my upstream adsl provider. What I

[squid-users] Re:Re: [squid-users] How to setup two ADSL line on a single linux box?

2007-09-12 Thread elvis . altherr
Hi Indunil ok, but (not shure) you have only one ADSL Line right? I think the solution is ment for backup porpouses, which means: if the main ADSL Line fails all traffic will be routed to the ISDN Backup Line In Switzerland the ADSL System is normally built like this: ENDUSER has a ADSL

[squid-users] Re:Re:Re How to setup two ADSL line on a single linux box?

2007-09-12 Thread elvis . altherr
Hi Indunil ok, but (not shure) you have only one ADSL Line right? I think the solution is ment for backup porpouses, which means: if the main ADSL Line fails all traffic will be routed to the ISDN Backup Line In Switzerland the ADSL System is normally built like this: ENDUSER has a ADSL

[squid-users] Re:[squid-users] Re:Re: [squid-users] How to setup two ADSL line on a single linux box?

2007-09-12 Thread elvis . altherr
Note this remark What this will not do: This type of spanning will not aggregate bandwidth for a single user. By this I mean that if you have two 5 meg DSLs you won't magically have a single 10 meg connection. This is because it routes destination IPs via one of the two ISP connections, so if

[squid-users] Re:Re: [squid-users] Re:Re: [squid-users] How to setup two ADSL line on a single linux box?

2007-09-12 Thread elvis . altherr
Hm, but with my method described it won't work so... If you have 2 ADSL Lines (let's say 5 MBit each ) ) after load balacing the bandwidth woud be the same. the only goal is failover for the lines more not. Much ADSL Carriers (like Swisscom in Switzerland) limit the bandwith so you can't go

[squid-users] Re:[squid-users] Re:Re: [squid-users] Re:Re: [squid-users] How to setup two ADSL line on a single linux box?

2007-09-12 Thread elvis . altherr
Sorry wrong, you're right, but works only with two different lines (ADSL and Cable p.a) but not with ADSL,cause this tecnology is a sinlge line solution in my earlier posts there was a statement about channel bundeling for ADSL (linke ISDN) and this woud increase the bandwith disscused in

[squid-users] Re:[squid-users] Re:[squid-users] Re:Re: [squid-users] Re:Re: [squid-users] How to setup two ADSL line on a single linux box?

2007-09-12 Thread elvis . altherr
Something to remeber: Most Providers do traffic shaping, which means, more than the limit isn't possible and the rest will be cutted! in the past i had a ADSL and Cable Line and for testing porpouses i tried load balancing, but the speed was'nt doubled (5 MB + 5MB), i reached a maximum of 7

AW: [squid-users] Re:[squid-users] Re:[squid-users] Re:Re: [squid-users] Re:Re: [squid-users] How to setup two ADSL line on a single linux box?

2007-09-12 Thread Elvis Altherr
Lucky you are Well here in Switzerland the Cable Network is built by Cablecom, and there network is often very lousy quality and slow -- especially while the rush hours sometimes the effective rate (i have a 10MBit Abo) is going to 5 MBit or even less and downloads and gameservers p.a. will be

AW: [squid-users] Re:[squid-users] Re:Re: [squid-users] How to setup two ADSL line on a single linux box?

2007-09-12 Thread Elvis Altherr
Ok, for now i don't paste any answers, but i think it was very useful even it's posted in the squid list isn't? regards E.Altherr -Ursprüngliche Nachricht- Von: Chris Nighswonger [mailto:[EMAIL PROTECTED] Gesendet: Mittwoch, 12. September 2007 17:52 An: [EMAIL PROTECTED] Cc:

[squid-users] squid 2.5 Stable 7 and Frontpage 2000 from MS

2005-02-06 Thread Elvis Altherr
Hi List I use squid proxy server on two machine to cache my local requests to the Internet Now if i want to connect (via Microsoft Frontpage 2000) the following error appears THE Webserver does not have any Authetification activated it has asked for Userauthetification and has not send a www